Inductors
An inductor is an electronic component that stores energy in the form of a magnetic field when an electric current flows through it. It is used in a variety of applications, including filters, oscillators, and power supply circuits. One of the main use cases for inductors is to block the flow of direct current (DC) while allowing alternating current (AC) to pass through. This makes them useful for filtering out unwanted frequencies or for blocking DC signals in AC circuits. Inductors are also used in oscillator circuits to create a sustained AC signal and in power supply circuits to smooth out voltage fluctuations. Flux.ai is home to the world's largest community-driven public library of inductors, featuring footprints, symbols, datasheets, and simulation models. Whether you are a professional engineer or a hobbyist, Flux.ai has the resources you need to design and build electronic circuits that include inductors.
IHLP6767GZER100M01
10 µH Shielded Molded Inductor 16.5 A 12mOhm Max Nonstandard Power Inductor for energy storage and filtering in DC/DC power converters. Features 10 µH inductance, ±20% tolerance, IHLP® 6767GZ package (17.15 × 17.15 mm), low DCR, and a shielded composite construction designed for high-current applications. #PowerInductor #ShieldedInductor #10uH #HighCurrent #LowDCR #IHLP6767GZ #VishayDale
78 Uses0 StarsMPL-AY1265-2R2
2.2µH Unshielded Molded Inductor 17 A 3.7mOhm 2-SMD, J-Lead The MPL-AY1265-2R2 is a 2.2 µH surface-mount molded power inductor from Monolithic Power Systems (MPS). It is designed for high-current DC-DC switching power supplies and power management applications requiring low DC resistance (DCR), high efficiency, and stable inductance over a wide operating temperature range. Its molded construction minimizes audible noise and provides excellent mechanical reliability for compact, high-performance electronic designs. Key Features 2.2 µH inductance with ±20% tolerance High rated current: up to 17 A Low DC resistance: 3.7 mΩ typ. (4.3 mΩ max.) Soft saturation characteristics for improved reliability Molded construction for enhanced durability and reduced EMI Low audible noise during switching operation Stable performance across a wide temperature range Operating temperature: −40°C to +155°C Compact SMD package: 13.5 × 12.6 × 6.2 mm RoHS/REACH compliant and halogen-free Typical Applications Battery-powered devices Portable electronics Embedded computing systems High-current switching mode power supplies (SMPS) High-frequency DC-DC converters Point-of-load (POL) converters FPGA power rails #MoldedInductor #PowerInductor #2_2uH #HighCurrent #LowDCR #SMPS #DCDCConverter #PowerManagement #SMD #MonolithicPowerSystems #RoHS #EmbeddedSystems
6 Uses0 StarsXAL6060-682MEC
6.8 µH Shielded Molded Inductor 9 A 20.8mOhm Nonstandard The XAL6060-682MEC specification defines the engineering requirements for a shielded surface-mount power inductor designed for high-efficiency energy storage and power conversion applications. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure stable inductance characteristics, efficient current handling, low electromagnetic interference, and long-term operational reliability. The component is intended for use in DC-DC converters, voltage regulator modules, power management systems, industrial automation equipment, automotive electronics, telecommunications infrastructure, and embedded electronic applications requiring compact, high-current inductive components. The magnetically shielded construction minimizes stray magnetic fields while supporting efficient switching performance and stable energy transfer in high-frequency power circuits. Engineering Requirements The power inductor shall be manufactured using high-quality magnetic core materials and precision-wound conductors to ensure consistent inductance, low core losses, and dependable long-term reliability. The construction shall maintain stable electrical and magnetic characteristics throughout the specified operating voltage, current, frequency, and temperature ranges. Electrical characteristics shall provide accurate inductance, low direct current resistance, high saturation current capability, and low core loss to maximize power conversion efficiency. The component shall maintain stable performance during continuous operation, transient load conditions, and dynamic switching without significant degradation of inductance or current-handling capability. The shielded magnetic structure shall minimize electromagnetic emissions and magnetic coupling with adjacent components while improving electromagnetic compatibility in densely populated printed circuit board assemblies. Thermal performance shall support efficient heat dissipation and continuous operation within the specified operating temperature range while maintaining electrical integrity and structural stability. Mechanical construction shall be suitable for automated surface-mount assembly and compatible with standard solder reflow manufacturing processes. The package shall withstand thermal cycling, vibration, mechanical shock, and handling without degradation of electrical or mechanical performance. Workmanship shall be free from defects including cracks, contamination, core damage, winding irregularities, plating defects, or structural inconsistencies that could adversely affect functionality or reliability. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with all applicable engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, magnetic characterization reports, thermal performance data, qualification records, inspection reports, material declarations, reliability data, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #PowerInductor #ShieldedInductor #PowerElectronics #DCDCConverter #PowerManagement #Magnetics #IndustrialElectronics #QualityAssurance #EngineeringDocumentation
20 Uses0 StarsXAL1010-103MED
10 µH Shielded Molded Inductor 15.5 A 14.75mOhm Max Nonstandard The XAL1010-103MED specification defines the engineering requirements for a shielded power inductor designed for high-efficiency energy storage and power conversion applications. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure stable inductance characteristics, efficient current handling, and long-term operational reliability in power electronic systems. The component is intended for use in DC-DC converters, voltage regulators, power management circuits, industrial control equipment, automotive electronics, and embedded systems requiring compact, high-current inductive components. The magnetically shielded construction minimizes electromagnetic interference while supporting efficient energy transfer and stable performance in high-frequency switching applications. Engineering Requirements The power inductor shall be manufactured using high-quality magnetic core materials and precision-wound conductors to ensure consistent inductance, low core losses, and reliable current-carrying capability. The construction shall maintain stable electrical performance under specified operating voltage, current, frequency, and temperature conditions. Electrical characteristics shall provide accurate inductance values, low direct current resistance, high saturation current capability, and low electromagnetic emissions. The component shall maintain stable performance during continuous operation, transient loading, and thermal cycling without significant degradation of inductance or efficiency. Thermal performance shall support effective heat dissipation and continuous operation within the specified temperature range while maintaining structural integrity and electrical characteristics. The shielded construction shall minimize magnetic field leakage and improve electromagnetic compatibility within densely populated electronic assemblies. Mechanical construction shall be suitable for surface-mount assembly and compatible with automated manufacturing processes. The component shall withstand solder reflow, vibration, mechanical shock, and handling without deformation or degradation of electrical performance. Workmanship shall be free from defects including cracks, contamination, core damage, winding irregularities, or structural inconsistencies. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with all applicable engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process. Documentation Supporting documentation shall include engineering drawings, electrical specifications, magnetic characterization data, thermal performance reports, qualification records, inspection reports, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before implementation to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #PowerInductor #ShieldedInductor #PowerElectronics #DCDCConverter #PowerManagement #Magnetics #IndustrialElectronics #QualityAssurance #EngineeringDocumentation #CommonPartsLibrary #Inductor #XAL1010
39 Uses0 Stars
