Inductors

10 µH Shielded Molded Inductor 10 A 17.2mOhm Max Nonstandard #commonpartslibrary #inductor #coil

10 µH Shielded Molded Inductor 3.9A 69.5mOhm Max 1616 (4040 Metric) The XGL4030-103MEC is a shielded surface-mount power inductor from the XGL4030 series by Coilcraft. It uses a molded composite core construction designed for high-current DC/DC converters, power management circuits, automotive electronics, and industrial applications. The component offers ultra-low DC resistance (DCR), low AC losses, and soft saturation characteristics for improved efficiency and thermal performance in compact designs. Key Features 10 µH inductance with ±20% tolerance Shielded molded inductor construction Low DCR: 69.5 mΩ max High current capability: 3.1 A saturation current 3.9 A RMS current Composite metal core for low core losses Compact 4.0 mm × 4.0 mm SMD package Wide operating temperature range: –40°C to +165°C AEC-Q200 qualified for automotive applications RoHS compliant and halogen-free Optimized for switching regulators and power conversion systems #CommonPartsLibrary #Inductor #XGL4030

Buck Switching Regulator IC Adjustable 1 Output 1000mA SOT-23-6 The LGS5145 is a step-down DC/DC regulator with internal switching, featuring SKIP control mode, which combines low quiescent current with high switching frequency to achieve high efficiency over a wide range of load currents. The SKIP mode uses a short “burst” cycle to switch the inductor current through the internal power MOSFETs, followed by a sleep cycle in which the power switch is turned off and the load current is supplied by the output capacitor. At light loads, the burst cycle is a fraction of the total cycle time, minimizing the average supply current and greatly improving efficiency at light loads. The LGS5145 has a wide input voltage range of 4.5V55V, minimizing the need for external surge suppression components.The LGS5145 features an integrated low resistance 0.6Ω high-side power MOSFET that provides at least 1A of output current capability with excellent load and line transient response. Junction temperature range from -40°C to +125°C ■ All ports are ESD protected to 3000V (HBM). ■ Wide input voltage range: 4.5V-55V ■ 600mΩ High Side Metal Oxide Semiconductor Field Effect Transistors ■ At least 1000mA continuous current output capability ■ Up to 90% efficiency ■ SKIP mode provides very high light load efficiency ■ 1.2MHz fixed operating frequency ■ Internal compensation helps reduce solution size, cost and design complexity ■ Supports capacitive start for large loads ■ Cycle-by-cycle overcurrent protection ■ Output short circuit protection ■ thermal shutdown protection ■ Available in ultra-small package SOT23-6 package #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-regulator #Switching-regulator

4.7 µH Shielded Drum Core, Wirewound Inductor 2.6 A 105mOhm Max 2-SMD The SRP4020TA-4R7M is a compact surface-mount power inductor designed for use in high-efficiency power conversion and energy storage applications. It is optimized for switching regulators, DC-DC converters, and filtering circuits where stable inductance, low core loss, and reliable current handling are required. The device features a magnetically shielded construction that minimizes electromagnetic interference, making it suitable for densely populated electronic assemblies. Its robust design supports consistent performance across a wide range of operating conditions, contributing to improved system efficiency and reduced noise. Construction and Materials The component is manufactured using a ferrite core with integrated winding, enclosed in a molded structure that provides mechanical stability and environmental protection. The shielding structure reduces flux leakage and enhances electromagnetic compatibility. External terminations are designed for reliable solderability and strong adhesion to standard printed circuit board pads. Electrical Characteristics The inductor provides a nominal inductance corresponding to its designation and maintains stability under rated operating conditions. It exhibits low direct current resistance to minimize conduction losses and supports moderate to high current levels without significant saturation. The component is engineered to maintain performance over variations in temperature and frequency typical of switching power applications. Thermal Performance The device is capable of operating within standard industrial temperature ranges, with thermal characteristics that support efficient heat dissipation through the PCB. Its construction helps maintain inductance stability and prevents degradation under thermal stress. Mechanical Characteristics The package is a low-profile, surface-mount form factor suitable for automated assembly. The compact footprint enables use in space-constrained designs, while the structure ensures durability during handling and reflow soldering processes. Applications Typical applications include step-down and step-up voltage regulators, power management modules, portable electronics, telecommunications equipment, and general-purpose filtering where compact size and efficient performance are critical. Reliability and Compliance The component is designed to meet common industry reliability standards for surface-mount passive devices. It is compatible with standard reflow soldering processes and is typically compliant with environmental regulations governing hazardous substances. #commonpartslibrary #inductor

10 µH Unshielded Wirewound Inductor 1.13 A 340mOhm Max 1210 (3225 Metric) PCA1V3230-100-R is a precision electronic component intended for use in signal conditioning and control applications. It is designed to provide stable performance under varying environmental and electrical conditions, making it suitable for integration into industrial, commercial, and instrumentation systems. The component emphasizes reliability, consistency, and compatibility with standard circuit architectures, supporting both analog and mixed-signal designs. Functional Overview The component operates as a passive electrical element that contributes to circuit tuning, filtering, or impedance control depending on application context. It is engineered to maintain consistent electrical characteristics across its operating range, ensuring predictable system behavior. Its construction supports low noise contribution and stable response over time. Electrical Characteristics The device is manufactured to meet tight tolerance requirements and exhibits stable electrical behavior under normal operating conditions. It supports typical voltage and current levels associated with low-power electronic circuits and is suitable for precision applications where signal integrity is critical. Performance is maintained across a defined temperature range with minimal drift. Mechanical Characteristics The component is housed in a compact form factor compatible with standard mounting techniques used in modern electronic assemblies. Its physical structure is optimized for durability and ease of handling during automated and manual assembly processes. Materials used in construction are selected for thermal stability and resistance to environmental stress. Environmental and Reliability Considerations The device is designed to operate reliably under typical environmental conditions encountered in electronic equipment. It demonstrates resistance to temperature variation, humidity, and mechanical stress within specified limits. Long-term stability and performance consistency are key design attributes, supporting extended service life. Applications Typical applications include signal filtering, voltage division, timing circuits, and general-purpose electronic design where precision and stability are required. It is suitable for use in consumer electronics, industrial control systems, communication devices, and instrumentation equipment. Compliance and Standards The component is manufactured in accordance with relevant industry standards for quality and environmental compliance. It is suitable for use in systems requiring adherence to common regulatory and safety guidelines. #commonpartslibrary #inductor #fixed

4.7 µH Unshielded Drum Core, Wirewound Inductor 62 A 0.95mOhm Max Vertical, 2 PC Pin The IHDM1008BCEV4R7M30 is a surface-mount power inductor designed for energy storage and filtering in switching power supplies and DC-DC converter circuits. It provides stable inductance characteristics under varying current conditions, making it suitable for applications requiring efficient power conversion and noise suppression. The device is constructed using a magnetically shielded structure to minimize electromagnetic interference and ensure reliable operation in densely populated circuit environments. Its design supports high current handling capability while maintaining low core losses, contributing to overall system efficiency. Functional Overview The inductor stores energy in its magnetic field when current flows through it and releases that energy when the current changes. This behavior is essential for smoothing current in switching regulators and maintaining stable voltage levels in power circuits. Its low resistance winding helps reduce power loss, while the magnetic shielding limits flux leakage, improving performance in sensitive electronic systems. The component is optimized for high-frequency operation typically found in modern power management designs. Electrical Characteristics The device provides a fixed inductance value with stable performance across a range of operating currents. It supports relatively high saturation current levels, allowing it to function effectively in power circuits without significant degradation of inductance. Low direct current resistance contributes to improved efficiency and reduced heat generation. The inductor is designed to maintain consistent electrical behavior across typical operating temperatures and frequencies used in switching applications. Interface Requirements The component features standard surface-mount terminals for direct placement onto printed circuit boards. Proper soldering and pad design are required to ensure mechanical stability and optimal electrical performance. Placement considerations should include minimizing loop area and proximity to switching elements to reduce noise and maximize efficiency. Operating Conditions The inductor is intended for operation across a wide temperature range suitable for consumer and industrial electronics. It is capable of maintaining performance under continuous load conditions and varying thermal environments. Adequate thermal management and airflow may be necessary in high-current applications to prevent excessive temperature rise. Protection and Reliability Features The device is constructed with durable materials to ensure long-term reliability under electrical and thermal stress. Its magnetically shielded design reduces susceptibility to external interference and limits emissions that could affect nearby components. It is designed to withstand standard handling and soldering processes associated with surface-mount assembly. Packaging and Integration The IHDM1008BCEV4R7M30 is provided in a compact surface-mount package optimized for automated assembly processes. Its form factor allows efficient use of board space while supporting high-performance power designs. The package design ensures secure mounting and consistent electrical contact in high-density circuit layouts. Applications Typical applications include DC-DC converters, voltage regulator modules, power management circuits, filtering stages, and energy storage elements in portable devices, industrial equipment, and communication systems. #commonpartslibrary #inductors

820 µH Shielded Drum Core, Wirewound Inductor 950 mA 1Ohm Max Nonstandard

1.5µH Shielded Drum Core, Wirewound Inductor 1.9 A 137mOhm Max 0806 (2016 Metric) The Bourns SRP2010-1R5M is a 1.5 µH wirewound drum-core power inductor designed for high-current, low-loss power conversion applications such as buck/boost converters in compact electronics like smartphones, tablets, SSDs, and embedded systems. It uses a metal powder (iron powder) core with magnetic shielding, which helps reduce EMI (electromagnetic interference) and improves efficiency in high-frequency switching circuits. Key Features Inductance: 1.5 µH Tolerance: ±20% Current Rating (Irms): ~1.9 A Saturation Current (Isat): ~2.5 A Low DCR: ~137 mΩ max Shielded construction (reduces magnetic radiation) Wirewound drum core design Surface-mount package (0806 / 2016 metric) Operating temperature: -40°C to +125°C RoHS compliant Typical Applications DC-DC converters (buck / boost regulators) Power management circuits in mobile devices Laptops, tablets, smartphones SSD/HDD power filtering Embedded systems and IoT devices #CommonPartsLibrary #Inductor #Coil #Choke #Fixed-Inductor #SRP2010

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 6V 10A 6V - 20V Input The LMZ22010TZ/NOPB is a compact, high-efficiency step-down (buck) DC-DC power module from Texas Instruments. It integrates a switching regulator, power MOSFETs, inductor, and compensation components into a single package, simplifying power supply design. This module is capable of delivering up to 10A output current with excellent thermal performance and minimal external components. It is intended for high power density applications such as industrial systems, telecommunications equipment, and embedded processing platforms. Manufacturer Information Manufacturer: Texas Instruments Part Number: LMZ22010TZ/NOPB Product Type: DC-DC Buck Power Module Key Features Integrated power module with inductor and controller Output current up to 10A Wide input voltage range High efficiency operation Adjustable output voltage Built-in protection features (thermal shutdown, overcurrent protection) Power-good output and enable control Requires minimal external components Electrical Characteristics Parameter Value Input Voltage Range 6 V to 20 V Output Voltage Range 0.8 V to 6 V (adjustable) Output Current Up to 10 A Switching Frequency ~500 kHz Efficiency Up to ~95% Operating Temperature Range -40°C to +125°C Package Information Package Type: TO-PMOD (Power Module) Mounting Type: Surface Mount Integrated inductor and power components Optimized for thermal performance Pin Configuration (Typical) Pin Name Description VIN Input supply voltage VOUT Regulated output voltage GND Ground EN Enable input FB Feedback for output adjustment PGOOD Power-good indicator Typical Applications Industrial automation systems Telecom and networking equipment FPGA / DSP / processor power rails Embedded systems Point-of-load regulation Design Considerations Ensure proper PCB layout for heat dissipation Use appropriate input/output capacitors External resistors required to set output voltage Consider airflow for high-current operation #commonpartslibrary #powersupply #dcdc #converter

Buck Switching Regulator IC Positive Fixed 5V 1 Output 1A SOT-23-6 The LMR50410Y5FQDBVRQ1 (part of the LMR50410-Q1 family from Texas Instruments) is a synchronous step-down (buck) DC-DC converter designed for automotive and industrial power applications. It operates over a wide input voltage range of 4 V to 36 V and can deliver up to 1 A output current, making it suitable for converting higher, unregulated voltages into stable lower voltages (e.g., 5 V or 3.3 V rails). The device integrates power switches, control circuitry, and compensation internally, allowing simple design with minimal external components and a compact PCB footprint. Key Features Power & Performance Wide input voltage range: 4 V to 36 V Output current: up to 1 A High switching frequency: 2.1 MHz (enables small inductors) High efficiency with PFM (light load) and FPWM (constant frequency) options Integration & Ease of Use Synchronous rectification (integrated high-side & low-side MOSFETs) Internal compensation (no complex external tuning) Minimal external components required Small SOT-23-6 package for compact designs Protection & Reliability Cycle-by-cycle current limit Short-circuit protection (hiccup mode) Thermal shutdown protection Undervoltage lockout (UVLO) ±1% reference voltage accuracy Automotive & Industrial Capability AEC-Q100 qualified (automotive grade) Operating temperature: Ambient: up to 125°C Junction: up to 150°C Designed for rugged automotive environments Additional Features Soft-start for controlled startup Precision enable pin for system control Monotonic startup with pre-biased output Available in fixed output (e.g., 5 V) variants Typical Applications Automotive electronics (ADAS, infotainment, lighting) Industrial power supplies Distributed power systems General-purpose DC-DC regulation #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator