Transistors
A transistor is a type of electronic device that controls the flow of electricity or current through a circuit. It acts as a switch or gate, allowing current to pass through or blocking it, depending on the input signal applied to the transistor. Transistors are widely used in a variety of electronic devices and systems, including computers, televisions, radios, and smartphones. They are also used in a range of industrial and medical applications, such as power supply systems and medical equipment. Flux.ai is home to the world's largest community-driven public library of transistors, with footprints, symbols, datasheets, and simulation models available for a wide range of devices. The library is constantly being updated and expanded by a community of engineers and enthusiasts, making it an invaluable resource for anyone working with transistors. Whether you're a student, hobbyist, or professional engineer, you'll find everything you need to know about transistors at Flux.ai.
ULN2803ADW
Bipolar (BJT) Transistor Array 8 NPN Darlington 50V 500mA Surface Mount 18-SOIC The ULN2803ADW is a high-voltage, high-current Darlington transistor array designed for interfacing low-level digital logic circuits with high-power loads. The device integrates eight NPN Darlington pairs with common-emitter outputs and suppression diodes for inductive load driving. It is commonly used in relay drivers, LED matrix control, solenoid actuation, motor drivers, lamp control, and industrial automation interfaces. The integrated clamp diodes enable direct driving of inductive loads without requiring additional external protection circuitry. The input stage is compatible with standard TTL and CMOS logic levels, making the device suitable for microcontroller, FPGA, and processor-based systems. The ULN2803ADW provides compact multi-channel switching capability in a wide-body SOIC surface-mount package optimized for automated assembly and high-density PCB layouts. Key Features Eight-channel NPN Darlington transistor array High-current sink driver outputs Integrated flyback suppression diodes TTL and CMOS compatible inputs Open-collector outputs Suitable for inductive and resistive loads High output voltage capability Parallel output operation supported for increased current handling Wide operating voltage range Surface-mount SOIC wide-body package Industrial and embedded control application support Electrical Characteristics Darlington transistor output configuration High DC current gain Low input current requirement Common-cathode clamp diode structure Open-collector output topology Logic-level input compatibility High-voltage output tolerance Multi-channel simultaneous switching support Applications Relay and solenoid drivers Stepper motor interfaces LED and lamp driving Industrial automation systems PLC output stages Embedded control systems Printer and actuator control Automotive electronics Logic buffer and level shifting applications Package Information Package Type: SOIC Wide Body Mounting Type: Surface Mount Multi-pin integrated driver package RoHS compliant options available #commonpartslibrary #integratedcircuit #driveric #darlingtonarray #powermanagement #industrialelectronics #embeddedhardware #relaydriver #motorcontrol #automationelectronics
82 Uses0 StarsAO3400
The YFW AO3400 is a 30V N-Channel Enhancement MOSFET designed for low-voltage and high-speed switching applications. It uses advanced trench MOSFET technology to achieve low on-resistance (RDS(on)), fast switching performance, and efficient power handling in a compact SOT-23 package. It is commonly used in load switching, DC-DC converters, battery-powered devices, motor control, LED driving, and PWM switching circuits. Key Features N-Channel Enhancement Mode MOSFET Drain-Source Voltage (VDS): 30V Continuous Drain Current (ID): up to 5.8A Low RDS(on): < 28mΩ @ VGS = 10V < 33mΩ @ VGS = 4.5V < 52mΩ @ VGS = 2.5V Logic-Level Gate Drive Compatible Fast Switching Speed Low Gate Charge Compact SOT-23 Package Suitable for PWM and Load Switch Applications RoHS / Pb-Free Compatible Typical Applications Power switching DC-DC converters Battery management systems Motor and fan control LED drivers Portable electronics Microcontroller-based switching circuits #CommonPartsLibrary #Transistor #FET #Mosfet
1.0k Uses0 StarsSTDRIVEG600
High voltage half-bridge gate driver for GaN transistors Features • dV/dt immunity ±200 V/ns • Driver current capability: – 1.3/2.4 A source/sink typ @ 25 °C, 6 V – 5.5/6 A source/sink typ @ 25 °C, 15 V • Separated turn on and turn off gate driver pins • 45 ns propagation delay with tight matching • 3.3 V, 5 V TTL/CMOS inputs with hysteresis • Interlocking function • UVLO on low-side and high-side sections • Dedicated pin for shut down functionality • Over temperature protection Applications • High-voltage PFC, DC-DC and DC-AC converters • Switch-mode power supplies • UPS systems • Solar power • Motor driver for home appliances, factory automation and industrial drives. #CommonPartsLibrary #IntegratedCircuit #powermanagement
22 Uses0 StarsLGS5145
Buck Switching Regulator IC Adjustable 1 Output 1000mA SOT-23-6 The LGS5145 is a step-down DC/DC regulator with internal switching, featuring SKIP control mode, which combines low quiescent current with high switching frequency to achieve high efficiency over a wide range of load currents. The SKIP mode uses a short “burst” cycle to switch the inductor current through the internal power MOSFETs, followed by a sleep cycle in which the power switch is turned off and the load current is supplied by the output capacitor. At light loads, the burst cycle is a fraction of the total cycle time, minimizing the average supply current and greatly improving efficiency at light loads. The LGS5145 has a wide input voltage range of 4.5V55V, minimizing the need for external surge suppression components.The LGS5145 features an integrated low resistance 0.6Ω high-side power MOSFET that provides at least 1A of output current capability with excellent load and line transient response. Junction temperature range from -40°C to +125°C ■ All ports are ESD protected to 3000V (HBM). ■ Wide input voltage range: 4.5V-55V ■ 600mΩ High Side Metal Oxide Semiconductor Field Effect Transistors ■ At least 1000mA continuous current output capability ■ Up to 90% efficiency ■ SKIP mode provides very high light load efficiency ■ 1.2MHz fixed operating frequency ■ Internal compensation helps reduce solution size, cost and design complexity ■ Supports capacitive start for large loads ■ Cycle-by-cycle overcurrent protection ■ Output short circuit protection ■ thermal shutdown protection ■ Available in ultra-small package SOT23-6 package #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-regulator #Switching-regulator
12 Uses0 StarsMMBT3904LT1G
Bipolar (BJT) Transistor NPN 40V 200 mA 300MHz 300 mW Surface Mount SOT-23-3 (TO-236) The MMBT3904LT1G is a general-purpose NPN bipolar junction transistor designed for switching and amplification applications. It is housed in a compact SOT-23 surface-mount package, making it suitable for high-density PCB designs. This transistor is widely used in low-power signal processing, digital switching, and analog amplification circuits due to its reliable performance and fast switching characteristics. Key Features General-purpose NPN transistor Compact SOT-23 surface-mount package Fast switching speed Low saturation voltage Suitable for low-current and low-power applications High reliability and stability Pb-free, Halogen-free, and RoHS compliant Electrical Characteristics (Typical @ 25°C unless otherwise specified) Collector-Emitter Voltage (VCEO): 40 V Collector-Base Voltage (VCBO): 60 V Emitter-Base Voltage (VEBO): 6 V Collector Current (IC): 200 mA (max) DC Current Gain (hFE): 100 – 300 Collector-Emitter Saturation Voltage (VCE(sat)): 0.2 V (typ) Transition Frequency (fT): ~300 MHz Absolute Maximum Ratings Collector Current (Continuous): 200 mA Power Dissipation: ~225 mW Junction Temperature: +150°C (max) Operating Temperature Range: -55°C to +150°C Storage Temperature Range: -55°C to +150°C Mechanical Characteristics Package Type: SOT-23 (TO-236AB) Mounting Type: Surface Mount Number of Pins: 3 Marking Code: Dependent on lot/manufacturer marking Applications General-purpose switching circuits Signal amplification Digital logic interfacing LED drivers and small load switching Audio and RF signal processing #CommonPartsLibrary #TransistorBJT #MMBT2222
1.7k Uses0 StarsMMBT2222ALT3G
Bipolar (BJT) Transistor NPN 40V 600 mA 300MHz 300 mW Surface Mount SOT-23-3 (TO-236) The MMBT2222ALT3G is a NPN general-purpose bipolar junction transistor (BJT) manufactured by onsemi, designed in a SOT-23 surface-mount package. It is the SMD version of the well-known 2N2222A transistor family, used for switching and signal amplification in compact electronic circuits. It is widely used in industrial, automotive (AEC-Q101 qualified variants), and general embedded systems due to its reliability, small size, and good electrical performance. Key Features NPN General-Purpose Transistor Suitable for switching and low-power amplification Collector-Emitter Voltage (Vceo) Up to 40 V Collector Current Up to 600 mA Power Dissipation Around 225–300 mW (depending on package conditions) High Frequency Performance Transition frequency up to ~300 MHz DC Current Gain (hFE) Typically ~100 at moderate currents Low Saturation Voltage Efficient switching performance for digital circuits SOT-23 Surface-Mount Package Compact footprint for modern PCB designs Wide Temperature Range Typically -55°C to +150°C RoHS / Lead-Free Compliant Environmentally compliant manufacturing Typical Applications LED switching circuits Relay driver stages MCU signal interfacing (Arduino, ESP32, etc.) Small motor drivers General signal amplification Automotive and industrial control circuits Important Note MMBT2222ALT3G = SMD version (SOT-23) Equivalent to 2N2222A (TO-92 through-hole version) in function, but not in physical package. 2N2222A SOT-23 #commonpartslibrary #transistor #bjt
539 Uses0 Stars
