Thermistors
A thermistor is a type of resistor that changes resistance with temperature. It is often used in temperature sensing and control applications because of its high sensitivity and fast response time. Thermistors can be found in a variety of devices, including thermostats, automotive engines, and medical equipment. They are also used in industrial processes to monitor and control temperature. Flux.ai has the world's largest community-driven public library of thermistors, including footprints, symbols, datasheets, and simulation models. This extensive collection makes it easy for designers and engineers to find the right thermistor for their specific needs. Whether you are working on a small consumer device or a large industrial project, Flux.ai's library has the resources you need to get the job done.
BQ25730RSNR
Charger IC Multi-Chemistry 32-QFN (4x4) The BQ25730RSNR is a highly integrated synchronous buck battery charger and system power management IC developed by Texas Instruments for applications requiring efficient charging of multi-cell lithium-ion and lithium-polymer batteries. The device is optimized for USB Type-C, USB Power Delivery, industrial, and portable embedded systems where high charging efficiency, flexible power management, and compact implementation are required. The charger integrates high-side and low-side MOSFET gate drivers along with advanced power path management features, enabling efficient battery charging while simultaneously powering the system load. The architecture supports NVDC power path operation, allowing stable system voltage regulation even when the battery is deeply discharged or absent. The device supports a wide operating input voltage range and programmable charging parameters suitable for various battery chemistries and capacities. Integrated input current optimization and dynamic power management help maximize available adapter power while preventing overload conditions. The BQ25730RSNR communicates with the host processor through an I²C interface, enabling software configuration, telemetry monitoring, and fault management. Internal ADC functionality provides real-time monitoring of charging voltage, current, temperature, and system operating conditions. Its high integration level reduces external component count and PCB area, making it suitable for compact industrial and portable power applications. Electrical Characteristics Wide input voltage operating range compatible with USB PD adapters and industrial power sources. Supports multi-cell lithium-ion and lithium-polymer battery charging configurations. High-efficiency synchronous buck charging architecture. Programmable charge current and charge voltage through digital control interface. Integrated ADC for system telemetry and power monitoring. Dynamic power management optimizes adapter utilization and system stability. Low standby current operation for battery-powered systems. Charging Features Constant current and constant voltage charging modes. Programmable input current limiting for USB and adapter compliance. Battery preconditioning and charge termination functionality. Support for fast charging operation with thermal regulation. Power path management enables simultaneous battery charging and system operation. Automatic recharge and battery maintenance functionality. Protection Features Input overvoltage protection. Battery overvoltage and overcurrent protection. Thermal regulation and thermal shutdown protection. Short-circuit and fault condition protection. Battery temperature monitoring support using external NTC thermistors. Reverse current protection and adapter isolation. Interface and Control I²C serial communication interface for configuration and monitoring. Programmable charging profiles and operating parameters. Interrupt and status reporting capabilities. Integrated telemetry reporting for voltage, current, and temperature measurements. Autonomous operation capability with minimal host intervention. Package Information Package type is WQFN. Compact thermally enhanced surface-mount package. Optimized for automated PCB assembly and high-density layouts. Applications USB Type-C and USB Power Delivery systems. Industrial portable electronics. Embedded computing platforms. Portable medical and instrumentation equipment. Battery-powered industrial controllers. Handheld terminals and data acquisition systems. Portable consumer and commercial electronics. #commonpartslibrary #integratedcircuit #powermanagement #batterycharger
2 Uses0 StarsBQ24075RGTR
Charger IC Lithium Ion 16-VQFN (3x3) The BQ24075RGTR is a standalone linear charger and power-path management integrated circuit developed by Texas Instruments for single-cell lithium-ion and lithium-polymer battery applications. The device is designed for portable and space-constrained electronic systems requiring efficient battery charging, USB compatibility, and simultaneous system power delivery. The integrated dynamic power-path management architecture enables the system load to be powered while independently charging the battery. The charger supports operation from either a USB power source or an external adapter and includes programmable charging and input current limiting functions for optimized power management. The device incorporates multiple protection and monitoring features including thermal regulation, overvoltage protection, reverse current protection, battery temperature monitoring, and safety timers. The BQ24075RGTR also provides battery disconnect capability through the SYSOFF control function, making it suitable for low-power and portable embedded designs. Typical applications include portable consumer electronics, handheld instruments, wearable devices, wireless accessories, battery-powered IoT equipment, medical portable systems, and embedded rechargeable products. Device Features Standalone single-cell lithium-ion and lithium-polymer battery charger Integrated power-path management architecture Simultaneous battery charging and system power support USB-compatible input current limiting Programmable fast-charge current capability Dynamic power management for unstable or limited input sources Battery temperature monitoring through external thermistor input Integrated thermal regulation and protection mechanisms Reverse current, short-circuit, and input overvoltage protection Programmable safety timers for pre-charge and fast-charge modes Charging status and power-good indication outputs Battery disconnect functionality through SYSOFF control Compact surface-mount VQFN package implementation Electrical Characteristics Designed for single-cell lithium-ion or lithium-polymer batteries Fixed battery regulation voltage suitable for standard single-cell charging Supports USB and external adapter input operation Linear charging topology Wide operating temperature range for portable and industrial applications Programmable input current limit for USB compliance and adapter compatibility Package Information Package Type: VQFN Pin Configuration: Sixteen-pin package Mounting Style: Surface mount Package Dimensions: Compact three-millimeter square footprint Functional Overview The BQ24075RGTR manages power distribution between the external input source, the system load, and the rechargeable battery. When external power is present, the device prioritizes powering the system while charging the battery according to programmable charging parameters. Dynamic power management prevents excessive loading of weak USB or adapter sources by automatically reducing charging current when necessary. Thermal regulation circuitry continuously monitors device temperature and adjusts charging operation to maintain safe operating conditions. Additional integrated protection functions ensure reliable operation during fault conditions such as input overvoltage, battery temperature abnormalities, reverse current flow, and output short circuits. #commonpartslibrary #integratedcircuit #powermanagement
37 Uses0 StarsBQ24075TRGTR
1.5A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC with 4.2 VBAT The BQ24075TRGTR (from Texas Instruments) is a highly integrated single-cell Li-Ion / Li-Polymer linear battery charger IC with power-path management. It is designed for portable and space-constrained applications, allowing a device to be powered from a USB port or AC adapter while simultaneously charging the battery. The device integrates charging control, power-path management, and safety features into a compact package. A key feature is its Dynamic Power Path Management (DPPM), which ensures the system is powered even when the battery is low or absent, while intelligently managing charging current. Key Features Battery Charging Supports single-cell Li-Ion / Li-Polymer batteries Up to 1.5 A programmable charge current Three-phase charging: Pre-charge (conditioning) Constant current Constant voltage Fixed 4.2 V charge voltage Power Path Management Dynamic Power Path Management (DPPM): Powers system and charges battery simultaneously Prioritizes system load over charging Allows system operation even with: Deeply discharged battery No battery connected Input & Power Features Operates from: USB input (100 mA / 500 mA selectable) AC adapter Programmable input current limit up to 1.5 A Input voltage range: ~4.35 V to 6.4 V (28 V max rating) Input dynamic power management (VIN-DPM) prevents source overload Protection & Safety Thermal regulation and shutdown Over-voltage protection (OVP) Short-circuit and reverse current protection Battery temperature monitoring (NTC thermistor input) Battery disconnect (SYSOFF) feature Control & Status Standalone operation (no MCU required, resistor-programmable) Charge status outputs: Charging Charge complete Power good Physical Characteristics Package: 16-pin VQFN (3 mm × 3 mm) Operating temperature: –40°C to +85°C #commonpartslibrary #integratedcircuit #powermanagement #batterycharger
635 Uses0 Stars
