Thermistors
A thermistor is a type of resistor that changes resistance with temperature. It is often used in temperature sensing and control applications because of its high sensitivity and fast response time. Thermistors can be found in a variety of devices, including thermostats, automotive engines, and medical equipment. They are also used in industrial processes to monitor and control temperature. Flux.ai has the world's largest community-driven public library of thermistors, including footprints, symbols, datasheets, and simulation models. This extensive collection makes it easy for designers and engineers to find the right thermistor for their specific needs. Whether you are working on a small consumer device or a large industrial project, Flux.ai's library has the resources you need to get the job done.
TMP112DQDRLRQ1
Digital temperature sensor with a 12-bit ADC and I²C/SMBus-compatible interface, designed for accurate temperature monitoring and NTC/PTC thermistor replacement in automotive systems such as infotainment, digital cockpits, battery management units, and vehicle control units. It operates from 1.4 V to 3.6 V, supports −40°C to +125°C, and provides up to ±0.4°C accuracy from 0°C to 65°C and ±0.7°C from −40°C to 125°C. #DigitalTemperatureSensor #TemperatureSensor #I2C #SMBus #Automotive #AECQ100 #TexasInstruments
0 Uses0 StarsNTCS0805E3103FHT
NTCS0805E3103FHT is a glass-protected 0805 (2012 metric) NTC thermistor for temperature sensing, compensation, and protection in automotive, industrial, telecom, and consumer electronics. It provides 10 kΩ resistance at 25°C, ±1% resistance tolerance, 3940 K B25/85, 210 mW maximum power dissipation, and an operating range of −55°C to +150°C; it is AEC-Q200 qualified. #NTCThermistor #TemperatureSensor #0805 #Vishay #AECQ200 #ThermalProtection #TemperatureCompensation
2 Uses0 StarsBQ76942PFBR
10-Series Battery Monitor and Protector IC – Battery monitoring and protection IC for 3- to 10-series Li-ion, Li-polymer, and LiFePO4 battery packs. The Texas Instruments BQ76942PFBR provides cell-voltage, current, and temperature monitoring, autonomous or host-controlled cell balancing, high-side NFET drivers, and secondary fuse protection. It supports ±200 mV current measurement, 400 kHz I²C, SPI, and HDQ interfaces, and temperature sensing through an internal sensor plus up to 9 external thermistors. It operates with up to 85 V on the cell-connect inputs and is housed in a 48-pin TQFP package. #TexasInstruments #BQ76942 #BatteryMonitor #BatteryProtector #BMS #LiIon #LiPo #LiFePO4 #CellBalancing #BatteryManagement #I2C #SPI #EmbeddedSystems
3 Uses0 StarsBQ7694202PFBR
10-Series Li-Ion/LiFePO₄ Battery Monitor and Protector – Multicell battery monitoring and protection IC designed to monitor and protect 3- to 10-series Li-ion, Li-polymer, and LiFePO₄ battery packs. The Texas Instruments BQ7694202PFBR provides cell-voltage, temperature, and current monitoring, integrated cell balancing, high-side NFET protection drivers, and overvoltage, undervoltage, overcurrent, short-circuit, and temperature protection. It supports 400-kHz I²C, SPI, and HDQ communication, includes a high-accuracy coulomb counter, supports an internal temperature sensor plus up to nine external thermistors, and operates from −40°C to +85°C in a 48-pin TQFP package. #TexasInstruments #BQ76942 #BQ7694202PFBR #BatteryMonitor #BatteryProtector #BMS #CellBalancing #LiIon #LiFePO4 #BatteryManagement #I2C #SPI #EmbeddedSystems
1 Uses0 StarsMAX14745LEWX+T
Power Management IC (PMIC) with Battery Charger – Integrated power-management IC for small single-cell lithium-ion battery systems, combining a linear battery charger, smart power selector, two 200 mA buck regulators, and three 100 mA LDO regulators. The Analog Devices MAX14745LEWX-T provides programmable regulator outputs, including 0.8–2.375 V / 0.8–3.95 V buck outputs and 0.8–3.6 V / 0.9–4 V LDO outputs. It supports I²C control, thermistor monitoring, power-on reset, voltage sequencing, and operates from −40°C to +85°C in a 36-bump, 0.4 mm-pitch WLP package. #AnalogDevices #MAX14745 #PMIC #BatteryCharger #LiIon #BuckRegulator #LDO #PowerManagement #I2C #EmbeddedSystems
0 Uses0 StarsBQ34210IPWRQ1
Battery Power Management IC Multi-Chemistry 14-TSSOP The bq34210-Q1 1-Series Cell System-Side CEDV Fuel Gauge provides fuel gauging and End-of-Service (EOS) Determination for 1-series cell batteries in applications that encounter infrequent discharge, such as eCall systems and uninterruptible power supplies (UPS) for backup during power failures, where batteries may stay connected to a charging power source most of their lifetime until needed. The bq34210-Q1 fuel gauge supports multiple battery chemistries, including Li-Ion, LiFePO4, and NiMH. The gas gauging function uses voltage, current, and temperature data along with Compensated End-ofDischarge (CEDV) technology to provide State-ofCharge (SOC) and State-of-Health (SOH) data. The device's EOS Determination function alerts when battery capability has degraded and is approaching the end of its usable service. Battery fuel gauging with the bq34210-Q1 fuel gauge requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery management system. Features 1• Automotive-Qualified AEC-Q100, Grade 3 • 1-Series Cell Battery Fuel Gauge Supports Li-Ion, LiFePO4, and NiMH (3-Cell) Chemistries – Resides on System Board – Powers Directly from the Battery with Integrated LDO – Supports a Low-Value External Sense Resistor (10 mΩ) • Learning Load Enable (LEN) from Host • Ultra-Low Power Consumption in NORMAL (50 µA) and SLEEP (9 µA) Modes • Supports Replacement Batteries • Accurate End-of-Service (EOS) Determination for Batteries in Rarely Discharged Applications • CEDV Gas Gauge for 1-Series Cell Batteries, Providing: – State-of-Charge (SOC) – Time-to-Empty (TTE) – State-of-Health (SOH) • High-Side and Low-Side Current Sensing Options • Internal Temperature Sensor OR External Thermistor • Microcontroller Peripheral Interface Supports: – 400-kHz I 2C™ Serial Interface – Configurable Interrupt (ALERT) for SOC, Battery Levels, Temperature Faults, and Charge/Discharge Status 2 Applications • eCall Systems • Telematics Backup Systems • Uninterruptible Power Supply (UPS) Backup Systems • Emergency Battery Power Modules #BatteryFuelGauge #BatteryManagement #FuelGaugeIC #AutomotiveElectronics #TexasInstruments #LiIonBattery #LiFePO4 #I2C #PowerManagement #AECQ100 #BackupBattery #UPS #EmbeddedSystems
7 Uses0 Stars
