Switches
A switch is a device that allows electricity to flow through a circuit by completing or interrupting the connection. It is a common component in electrical and electronic systems and is used in a variety of applications, such as controlling the flow of electricity in a circuit, turning devices on and off, and routing electrical signals. One of the primary use cases for switches is to control the flow of electricity in a circuit. This can be done by manually flipping the switch or by using a control mechanism, such as a timer or a sensor. Another common use for switches is to turn devices on and off. This can be done using a switch that is built into the device or by using a separate switch that is connected to the device. In addition to these basic use cases, switches can also be used to route electrical signals. For example, a switch can be used to route a signal from one device to another or to direct a signal to a specific circuit or component. If you're looking for a wide variety of switches for your projects, flux.ai has the world's largest community-driven public library of them. The library includes footprints, symbols, datasheets, and simulation models for a wide range of switches, making it easy to find the right switch for your needs.
XAL7070-223MEC
22 µH Shielded Molded Power Inductor – High-current surface-mount power inductor designed for DC-DC converters, voltage regulators, VRM/VRD applications, power supplies, battery management systems, industrial automation, automotive electronics, and embedded power-management circuits. The Coilcraft XAL7070-223MEC features a 22 µH inductance (±20%) with a metal-composite molded core and shielded construction, providing high current capability with low EMI. It has a 39.7 mΩ maximum DCR, 5.6 A saturation current (Isat), and 4.7 A RMS current rating at a 20°C temperature rise. Coilcraft specifies an 8.1 MHz typical self-resonant frequency, 0–60 V operating voltage, and an operating ambient temperature range of −40°C to +125°C. The component measures approximately 7.5 × 7.2 × 7.0 mm, uses tin-silver over copper terminations, and is AEC-Q200 qualified, making it suitable for automotive and demanding industrial applications. The XAL7070 series uses soft-saturation characteristics, which makes this family particularly useful in VRM/VRD and high-current switching applications where inductance needs to remain relatively stable as load current increases. #Coilcraft #XAL7070 #XAL7070223MEC #PowerInductor #22uH #ShieldedInductor #MoldedInductor #DCDCConverter #VRM #VRD #AECQ200 #AutomotiveElectronics #PowerManagement #EmbeddedSystems
3 Uses0 StarsLNK3208D-TL
Converter Offline Buck, Buck-Boost, Flyback Topology 66kHz SO-8C Non-isolated off-line switcher IC that integrates a 725 V power MOSFET and controller for buck, buck-boost, and flyback power supplies. The LNK3208D-TL operates at a typical 66 kHz switching frequency and provides typical output current capability up to 485 mA in MDCM or 775 mA in CCM at 85–265 VAC, with integrated current limiting, overvoltage, over-temperature protection, and auto-restart. Available in an SO-8C package. #PowerIntegrations #LNK3208D-TL #LinkSwitchTN2 #PowerSupply #SwitcherIC
0 Uses0 StarsIAUTN15S6N025TATMA1
N-Channel 150 V 245A (Tj) 357W (Tc) Surface Mount PG-HDSOP-16-1 N-channel automotive power MOSFET designed for switching applications, featuring a 150 V drain-source voltage rating, 245 A continuous drain current, and 2.5 mΩ maximum drain-source on-state resistance at VGS = 10 V and ID = 100 A. The device is specified for -55°C to +175°C operation and is housed in a PG-HDSOP-16-1 package. #MOSFET #NChannel #Automotive #150V #245A
57 Uses0 StarsTMUX6234PWR
4 Circuit IC Switch 2:1 6.2Ohm 20-TSSOP Quad SPDT Analog Switch — provides four independently controlled single-pole double-throw (SPDT) switches with bidirectional signal paths and 1.8 V-compatible logic inputs. It operates from 4.5 V to 36 V single supply or ±4.5 V to ±18 V dual supplies, with 3.6 Ω typical on-resistance, up to 400 mA continuous channel current, and –40°C to +125°C operating temperature. Available in a 20-pin TSSOP (PW) package. #TexasInstruments #TMUX6234PWR #AnalogSwitch #SPDT #Multiplexer #SignalSwitch #TSSOP
0 Uses0 StarsDM3AT-SF-PEJM5
10 (8 + 2) Position Card Connector Secure Digital - microSD™ Surface Mount, Right Angle Gold microSD socket push push MicroSD card connector, 8-contact, top-board SMT socket designed for microSD cards with a push-push insertion/ejection mechanism and card detection switch. The DM3AT-SF-PEJM5 is rated for 0.5 A and 125 V AC, operates from -25 °C to +85 °C, and features right-angle SMT termination with gold-plated contact and lead areas. #MicroSD #CardConnector #SMT #Hirose
911 Uses0 StarsLM66100DCKR
OR Controller P-Channel 1:1 SC-70-6 The LM66100DCKR is an ideal diode and power path management device manufactured by Texas Instruments. This integrated circuit is designed to provide low-loss reverse polarity protection and automatic power path control for low-voltage DC power systems. By utilizing an integrated low-resistance MOSFET architecture, the device significantly reduces forward voltage drop and power dissipation compared to conventional Schottky diodes. The device supports automatic source selection, reverse current blocking, and efficient power OR-ing functionality, making it suitable for battery-powered devices, USB-powered electronics, industrial embedded systems, portable equipment, and redundant power supply architectures. Its ultra-low forward voltage characteristics improve overall system efficiency and help extend battery operating life in portable applications. The LM66100DCKR is optimized for compact embedded designs requiring efficient power routing, input protection, and seamless power source switching while minimizing thermal losses and PCB footprint requirements. Engineering Specification Device Type Ideal diode and power path protection IC Power Management Function Reverse current blocking and automatic power path control Switching Technology Integrated low-resistance MOSFET architecture Reverse Protection Reverse polarity and reverse current protection Forward Voltage Characteristics Ultra-low forward voltage drop for high-efficiency operation Power Path Features Automatic source selection and power OR-ing support Efficiency Characteristics Reduced conduction loss compared to conventional diode solutions Input Characteristics Designed for low-voltage DC power rail operation Thermal Characteristics Low thermal dissipation due to efficient MOSFET conduction Protection Features Reverse current blocking Reverse polarity protection Power path isolation Fault-tolerant operation Package Type SC70 surface-mount package Mounting Style Surface mount technology Applications Battery-powered electronics USB-powered systems Power multiplexing Portable devices Embedded systems Industrial electronics Redundant power supplies Power OR-ing circuits IoT hardware Low-power electronic systems Manufacturer Texas Instruments #commonpartslibrary #idealdiode #powermanagement #reversepolarityprotection #powerpathcontroller #texasinstruments #powerelectronics #embeddedhardware #portableelectronics #surfaceountcomponents #electronicsdesign #powersupply #usbpower #batterypowered #industrialelectronics
349 Uses0 StarsAS11CH
SPST Right-Angle Through-Hole Slide Switch – Miniature Single-Pole Single-Throw (SPST) slide switch designed for consumer electronics, industrial controls, instrumentation, embedded systems, communication equipment, portable devices, and general-purpose PCB switching applications. The NKK Switches AS11CH is part of the AS Series, featuring an ON–OFF switching function with a through-hole, right-angle PCB mount and a 3.8 mm standard actuator. It is rated for 0.4 VA (AC/DC) at 28 V, making it ideal for low-power signal switching. The switch utilizes gold-plated phosphor bronze contacts for excellent low-level signal reliability, non-shorting (break-before-make) contacts, and epoxy-sealed terminals to improve soldering reliability and protect against flux contamination. It provides 2.5 mm actuator travel, 260 gf operating force, and both 50,000 mechanical and electrical cycles. Operating over a −30°C to +85°C temperature range, it is well suited for compact embedded and industrial electronic designs. #NKKSwitches #AS11CH #ASSeries #SlideSwitch #SPST #RightAngleSwitch #ThroughHole #GoldContacts #SignalSwitch #IndustrialElectronics #EmbeddedSystems #PCBSwitch
823 Uses0 Stars
