Sensors

Hall Effect Sensor Single Axis SOT-23-3 Hall-Effect Sensor for linear magnetic field sensing, providing an analog ratiometric voltage output proportional to the applied magnetic flux density. The DRV5056A4QDBZR operates from a 2.7 V to 38 V supply, supports unidirectional magnetic field detection, and features a 20 kHz bandwidth with integrated temperature compensation for stable operation over the specified operating temperature range. #HallEffectSensor #LinearHallSensor #MagneticFieldSensor #AnalogOutput #RatiometricOutput #2.7Vto38V #20kHzBandwidth #TexasInstruments #DRV5056A4QDBZR

Pressure Sensor 1PSI (6.89kPa) Gauge Male - 0.11" (2.79mm) Tube 14 b 6-DIP (0.453", 11.50mm), Top Port Pressure sensor for measuring 0 to 1 psi (gauge) pressure with a digital I²C interface. The ABP2DANT001PG2A3XX operates from a 3.3 V supply and provides compensated, calibrated pressure and temperature output, making it suitable for direct integration into embedded measurement and control systems. #PressureSensor #BoardMountPressureSensor #Honeywell

Accelerometer, Gyroscope, Temperature, 6 Axis Sensor I2C, I3C, SPI Output The ASM330LHHX is a 6-axis IMU featuring a 3-axis digital accelerometer and a 3‑axis digital gyroscope with an extended temperature range up to +105°C, designed to address automotive nonsafety applications. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes to serve both the automotive and consumer markets. The ASM330LHHX is AEC-Q100 compliant and industrialized through a dedicated MEMS production flow to meet automotive reliability standards. All the parts are fully tested with respect to temperature to ensure the highest quality level. The sensing elements are manufactured using ST’s proprietary micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit, which is trimmed to better match the characteristics of the sensing element. Features • AEC-Q100 qualified • Android Auto™ compliant and CarPlay® compliant • Extended temperature range from -40 to +105°C • Embedded compensation for high stability over temperature • Accelerometer user-selectable full scale up to ±16 g • Extended gyroscope range from ±125 to ±4000 dps • Dual operating modes: high-performance and low-power mode • I²C, MIPI I3C℠, and SPI serial interfaces • Six-channel synchronized output to enhance accuracy of dead-reckoning algorithms • Programmable finite state machine • Machine learning core • Smart programmable interrupts • Embedded 3 KB FIFO available to underload host processor • ECOPACK and RoHS compliant Applications • Dead reckoning (DR) • Vehicle-to-everything (V2X) • Telematics, e-tolling • Antitheft systems • Impact detection and crash reconstruction • Motion-activated functions • Driving comfort • Vibration monitoring and compensation #ASM330LHHXTR #STMicroelectronics #IMU #MEMS #Accelerometer #Gyroscope #AutomotiveElectronics #MotionSensor #MachineLearning #SensorFusion #AECQ100 #EmbeddedSystems

Battery Power Management IC Multi-Chemistry 14-TSSOP The bq34210-Q1 1-Series Cell System-Side CEDV Fuel Gauge provides fuel gauging and End-of-Service (EOS) Determination for 1-series cell batteries in applications that encounter infrequent discharge, such as eCall systems and uninterruptible power supplies (UPS) for backup during power failures, where batteries may stay connected to a charging power source most of their lifetime until needed. The bq34210-Q1 fuel gauge supports multiple battery chemistries, including Li-Ion, LiFePO4, and NiMH. The gas gauging function uses voltage, current, and temperature data along with Compensated End-ofDischarge (CEDV) technology to provide State-ofCharge (SOC) and State-of-Health (SOH) data. The device's EOS Determination function alerts when battery capability has degraded and is approaching the end of its usable service. Battery fuel gauging with the bq34210-Q1 fuel gauge requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery management system. Features 1• Automotive-Qualified AEC-Q100, Grade 3 • 1-Series Cell Battery Fuel Gauge Supports Li-Ion, LiFePO4, and NiMH (3-Cell) Chemistries – Resides on System Board – Powers Directly from the Battery with Integrated LDO – Supports a Low-Value External Sense Resistor (10 mΩ) • Learning Load Enable (LEN) from Host • Ultra-Low Power Consumption in NORMAL (50 µA) and SLEEP (9 µA) Modes • Supports Replacement Batteries • Accurate End-of-Service (EOS) Determination for Batteries in Rarely Discharged Applications • CEDV Gas Gauge for 1-Series Cell Batteries, Providing: – State-of-Charge (SOC) – Time-to-Empty (TTE) – State-of-Health (SOH) • High-Side and Low-Side Current Sensing Options • Internal Temperature Sensor OR External Thermistor • Microcontroller Peripheral Interface Supports: – 400-kHz I 2C™ Serial Interface – Configurable Interrupt (ALERT) for SOC, Battery Levels, Temperature Faults, and Charge/Discharge Status 2 Applications • eCall Systems • Telematics Backup Systems • Uninterruptible Power Supply (UPS) Backup Systems • Emergency Battery Power Modules #BatteryFuelGauge #BatteryManagement #FuelGaugeIC #AutomotiveElectronics #TexasInstruments #LiIonBattery #LiFePO4 #I2C #PowerManagement #AECQ100 #BackupBattery #UPS #EmbeddedSystems

Precision Celsius analog temperature sensor, 10 mV/°C output, 4–30 V supply, TO-92. Features 1• Calibrated Directly in Celsius (Centigrade) • Linear + 10-mV/°C Scale Factor • 0.5°C Ensured Accuracy (at 25°C) • Rated for Full −55°C to 150°C Range • Suitable for Remote Applications • Low-Cost Due to Wafer-Level Trimming • Operates From 4 V to 30 V • Less Than 60-μA Current Drain • Low Self-Heating, 0.08°C in Still Air • Non-Linearity Only ±¼°C Typical • Low-Impedance Output, 0.1 Ω for 1-mA Load

TMR analog bridge magnetic sensor for linear magnetic field measurement, featuring a bipolar Wheatstone bridge output with a ±2 mT measurement range. Operates from a 0 to 10 V supply, provides 120 mV/V/mT typical sensitivity, 20 kΩ bridge resistance, and supports up to 300 kHz bandwidth. Packaged in a 2.5 mm × 2.5 mm DFN-6 package for surface-mount applications. #TMR #MagneticSensor #Magnetometer #AnalogSensor #WheatstoneBridge #BipolarOutput #DFN6 #NVE

FPD-Link IV 7.55-Gbps serializer with CSI-2 interface for 8MP+ cameras, radar and other sensors Serializer for high-speed sensor data transmission over FPD-Link™ IV, supporting a 7.55 Gbps forward channel (up to 6 Gbps video payload) and a 47.1875 Mbps bidirectional control channel. Features a single MIPI D-PHY v2.1 interface with 1 clock lane and 1, 2, or 4 configurable data lanes supporting up to 1.5 Gbps per lane, and a MIPI CSI-2 v2.1 receiver with 16 virtual channels. Operates from a single 1.8 V supply, supports Power-over-Coax (PoC), coaxial or shielded twisted-pair (STP) cables, and includes CRC data protection, sensor data integrity check, I²C write protection, voltage and temperature monitoring, programmable alarms, and line fault detection. Packaged in a 32-pin VQFN (5 mm × 5 mm). #Serializer #FPDLinkIV #MIPICSI2 #MIPIDPHY #Automotive #ADAS #PowerOverCoax #SensorInterface #VQFN32 #TexasInstruments

MAX30105 Breakout Board Particle Sensor Breakout for optical particle detection and proximity sensing based on the MAX30105 sensor. Operates from a 3.3 V to 5 V supply with onboard voltage regulation and logic-level translation for 1.8 V, 3.3 V, and 5 V I/O compatibility. Communicates via an I²C interface and features red, green, and infrared (IR) LEDs, a photodetector, and an active-low interrupt output. The breakout includes configurable 4.7 kΩ I²C pull-up resistors and an INT pull-up resistor through onboard jumpers. #ParticleSensor #OpticalSensor #MAX30105 #I2C #ProximitySensor #IRSensor #SparkFun #BreakoutBoard

Digital Temperature Sensor – 16-bit digital temperature sensor with I²C/SMBus 3.0 interface for local temperature measurement from −40°C to +125°C. Operates from a 1.5 V to 3.6 V supply and provides ±0.5°C accuracy over the −10°C to +60°C range. Features programmable temperature thresholds, ALERT output, one-shot mode, support for up to 1 MHz I²C clock, and up to four selectable I²C addresses. Housed in a 6-pin UDFN (2 × 2 mm) package. #STMicroelectronics #STTS22H #STTS22HTR #TemperatureSensor #DigitalTemperatureSensor #I2C #SMBus #16Bit #TemperatureMonitoring #UDFN6 #EmbeddedSystems #Sensors

60 GHz Industrial Radar Sensor SoC – Single-chip 60 GHz FMCW radar sensor with an integrated Arm® Cortex®-M4F processor, hardware accelerator, and antenna-on-package (AOP) for industrial sensing applications. Operates in the 57 GHz to 64 GHz frequency band, features 3 transmit and 4 receive radar channels, supports communication via CAN FD, I²C, SPI, UART, and GPIO, and operates from a 3.3 V supply. Specified for an operating temperature range of −40°C to +105°C and housed in a 101-ball FCCSP package. #TexasInstruments #IWRL6432BRQGAMYR #IWRL6432AOP #RadarSensor #60GHzRadar #FMCW #IndustrialRadar #RadarSoC #ArmCortexM4F #AntennaOnPackage #CANFD #SPI #I2C #UART #FCCSP101 #EmbeddedSystems