Resistors
A resistor is an electronic component that reduces the flow of current in a circuit. It is used to limit the amount of current flowing through a circuit, or to create a voltage drop in a circuit. One of the main uses of resistors is to protect components from too much current, which can cause damage or failure. Flux.ai is the world's largest community-driven public library of resistors, with footprints, symbols, datasheets, and simulation models. Whether you're an engineer working on a new design, or a student learning about electronics, Flux.ai is the go-to resource for all things resistor-related. With a wealth of information and resources available, you'll find everything you need to know about resistors, and more.
WP483GDT
Green 568nm LED Indication - Discrete 2.2V Radial The WP483GDT is a through-hole green light-emitting diode designed for general-purpose visual indication and low-power lighting applications. It emits a visible green wavelength when forward biased and is commonly used in status indicators, signal displays, and basic illumination circuits. The device is built with a durable epoxy lens package that provides mechanical protection and enhances light output visibility. It is suitable for use in a wide range of electronic systems, including consumer electronics, control panels, and embedded designs. Device Overview The component is a standard discrete LED with a two-lead configuration consisting of an anode and a cathode. It operates by converting electrical energy into light through electroluminescence. The emitted color falls within the green spectrum, making it appropriate for applications requiring clear visual signaling without excessive brightness or power consumption. Electrical Characteristics The LED operates under forward bias conditions, with a typical forward voltage in the range expected for green LEDs. It supports low current operation while maintaining consistent luminous output. Reverse voltage tolerance is limited, and proper polarity must be observed to prevent damage. Current-limiting resistors are required in circuit integration to ensure safe operation. Optical Characteristics The device produces a green light output with a defined luminous intensity and viewing angle based on its lens shape and internal structure. The epoxy lens may be diffused or clear, affecting the spread and focus of the emitted light. Brightness is dependent on the forward current applied. Mechanical Characteristics The LED is housed in a standard round through-hole package, compatible with typical PCB mounting. Leads are spaced to fit common board layouts and can be soldered directly. The epoxy body provides insulation and environmental protection while maintaining optical clarity. Thermal Considerations The device is designed for low power dissipation but should be operated within recommended limits to avoid overheating. Adequate spacing and proper current control help maintain thermal stability and prolong device lifespan. Applications The WP483GDT is suitable for indicator lights in electronic devices, status displays in control systems, educational and hobby electronics, and general-purpose signaling applications where green illumination is required. Compliance and Handling The component should be handled using standard ESD precautions. Storage and soldering conditions should follow typical LED handling practices to maintain performance and reliability. #commonpartslibrary #led #green
100 Uses0 StarsLM393N
Comparator Standard (General Purpose) Open-Collector, Rail-to-Rail 8-PDIP The LM393N is a dual independent voltage comparator designed for operation from a single power supply over a wide range of voltages. It can also operate from split power supplies, allowing flexible integration into analog and mixed-signal systems. Each comparator features high gain and low input offset voltage, enabling precise comparison between two input signals. The device is optimized for low power consumption and supports open-collector outputs, making it suitable for interfacing with a variety of logic families and external circuits. Its robust design allows reliable performance across a broad temperature range, making it appropriate for industrial, automotive, and consumer applications. Functional Overview The device contains two separate comparators sharing a common power supply. Each comparator compares the voltage at its inverting and non-inverting inputs and drives the output transistor accordingly. The open-collector output stage allows wired-OR configurations and easy level shifting using an external pull-up resistor. When the non-inverting input voltage exceeds the inverting input voltage, the output transistor turns off, allowing the output to be pulled high externally. When the inverting input is higher, the transistor conducts and pulls the output low. Electrical Characteristics The LM393N operates over a wide supply voltage range and exhibits low input bias current and low input offset voltage, contributing to stable and accurate performance. The input common-mode voltage range includes ground, enabling ground-referenced sensing. The output stage is capable of sinking current sufficient to drive loads such as LEDs, relays (with appropriate buffering), or logic inputs. The device is designed for low supply current, supporting energy-efficient designs. Input and Output Behavior Inputs are high impedance and suitable for direct connection to sensors, reference voltages, or signal conditioning networks. The output requires an external pull-up resistor to define the high logic level. This configuration allows flexibility in selecting output voltage levels independent of the supply voltage, within device limits. The open-collector structure also supports multiple outputs connected together for logical operations. Thermal and Environmental Conditions The device is specified for operation across a wide temperature range, ensuring stable functionality under varying environmental conditions. Proper thermal management and adherence to recommended operating conditions ensure long-term reliability. Packaging and Pin Configuration The LM393N is typically provided in a dual in-line package suitable for through-hole mounting. The pin configuration supports two independent comparator channels, each with inverting input, non-inverting input, and output, along with shared power supply and ground connections. Applications The LM393N is suitable for voltage level detection, threshold sensing, zero-crossing detection, oscillator circuits, pulse generation, and analog-to-digital interfacing. It is commonly used in power management systems, battery monitoring, signal conditioning, and embedded control systems. Design Considerations External components such as pull-up resistors, input filtering networks, and hysteresis feedback may be required depending on the application. Careful layout and noise considerations improve performance in high-sensitivity circuits. The open-collector output requires proper configuration to ensure correct logic levels and switching behavior. #commonpartslibrary #integratedcircuit #comparator
29 Uses0 StarsRS01010R00FE73
10 Ohms ±1% 10W Through Hole Resistor Axial Moisture Resistant Wirewound RS01010R00FE73 is a surface-mount, low-ohmic current sense resistor designed for precision current measurement and power management applications. It features a robust metal element construction that provides excellent thermal stability, low inductance, and high accuracy. This component is commonly used in power supplies, battery management systems, motor control circuits, and DC-DC converters where accurate current sensing is critical. Key Features Ultra-low resistance value for current sensing applications High power rating in compact SMD package Tight tolerance for precision measurement Low temperature coefficient for stable performance Excellent pulse handling capability RoHS compliant and lead-free Electrical Characteristics Resistance Value: 0.010 Ω (10 mΩ) Tolerance: ±1% Power Rating: 1 W Temperature Coefficient (TCR): ±75 ppm/°C (typical) Operating Temperature Range: -55°C to +155°C Mechanical Characteristics Package Type: Surface Mount (SMD) Package Size: 2512 (approx. 6.3 mm × 3.2 mm) Construction: Metal strip / metal element Termination: Nickel barrier with matte tin plating Performance Characteristics Low parasitic inductance for high-frequency applications High thermal conductivity for efficient heat dissipation Stable resistance over temperature and load conditions Suitable for high current measurement Applications Current sensing in power supplies Battery management systems (BMS) Motor control and drive circuits DC-DC converters Automotive electronics #CommonPartsLibrary #Resistor #THT #Axial
1 Uses0 StarsLMZ22010TZ/NOPB
Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 6V 10A 6V - 20V Input The LMZ22010TZ/NOPB is a compact, high-efficiency step-down (buck) DC-DC power module from Texas Instruments. It integrates a switching regulator, power MOSFETs, inductor, and compensation components into a single package, simplifying power supply design. This module is capable of delivering up to 10A output current with excellent thermal performance and minimal external components. It is intended for high power density applications such as industrial systems, telecommunications equipment, and embedded processing platforms. Manufacturer Information Manufacturer: Texas Instruments Part Number: LMZ22010TZ/NOPB Product Type: DC-DC Buck Power Module Key Features Integrated power module with inductor and controller Output current up to 10A Wide input voltage range High efficiency operation Adjustable output voltage Built-in protection features (thermal shutdown, overcurrent protection) Power-good output and enable control Requires minimal external components Electrical Characteristics Parameter Value Input Voltage Range 6 V to 20 V Output Voltage Range 0.8 V to 6 V (adjustable) Output Current Up to 10 A Switching Frequency ~500 kHz Efficiency Up to ~95% Operating Temperature Range -40°C to +125°C Package Information Package Type: TO-PMOD (Power Module) Mounting Type: Surface Mount Integrated inductor and power components Optimized for thermal performance Pin Configuration (Typical) Pin Name Description VIN Input supply voltage VOUT Regulated output voltage GND Ground EN Enable input FB Feedback for output adjustment PGOOD Power-good indicator Typical Applications Industrial automation systems Telecom and networking equipment FPGA / DSP / processor power rails Embedded systems Point-of-load regulation Design Considerations Ensure proper PCB layout for heat dissipation Use appropriate input/output capacitors External resistors required to set output voltage Consider airflow for high-current operation #commonpartslibrary #powersupply #dcdc #converter
19 Uses0 StarsTPS543021DRLR
Buck Switching Regulator IC Positive, Isolation Capable Adjustable 0.596V 1 Output 3A SOT-563, SOT-666 The TPS543021DRLR is a compact, integrated power regulator that converts a wide input voltage (typically from batteries or power rails) into a regulated lower output voltage with high efficiency. It includes internal power switches and control circuitry, simplifying power supply design and reducing external component count. Key Features Topology: Synchronous buck converter Input Voltage Range: ~4.5 V to 28 V Output Voltage: Adjustable (via external resistors) Output Current: Up to 3 A continuous Switching Frequency: ~500 kHz (fixed) Efficiency: High efficiency (up to ~90%+) Quiescent Current: Low, suitable for power-sensitive designs Protection Features: Overcurrent protection (OCP) Thermal shutdown Undervoltage lockout (UVLO) Package & Physical Info Package Type: SOT-563 / VSON (compact, no-lead package) Mounting: Surface Mount (SMT) Packaging: Tape & reel (DRLR suffix) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-regulator #Switching-regulator
36 Uses0 StarsRGT1608P-3652-B-T5
36.5 kOhms ±0.1% 0.063W, 1/16W Chip Resistor 0603 (1608 Metric) Anti-Sulfur, Automotive AEC-Q200 Thin Film The RGT1608P-3652-B-T5 is a precision surface-mount thick film chip resistor in a 0603 (1608 metric) package. It is designed for applications requiring tight tolerance and stable temperature performance. The component is suitable for high-accuracy circuits such as instrumentation, signal conditioning, and precision voltage division. Key Features Compact 0603 (1608 metric) SMD package High precision ±0.1% tolerance Low temperature coefficient Stable performance over wide temperature range Compatible with standard reflow soldering RoHS compliant and lead-free Electrical Characteristics Resistance Value: 36.5 kΩ Resistance Tolerance: ±0.1% (B) Temperature Coefficient: ±25 ppm/°C (typical) Rated Power: 0.1 W (1/10 W) Maximum Working Voltage: 75 V Maximum Overload Voltage: 150 V Mechanical Characteristics Package Size: 0603 (1608 Metric) Length: 1.6 mm Width: 0.8 mm Height: ~0.45 mm Environmental Specifications Operating Temperature Range: -55°C to +155°C Moisture Sensitivity Level: MSL 1 Thermal Shock: Meets standard IEC requirements Packaging Information Packaging Type: Tape and Reel (T5) Reel Quantity: Typically 5,000 pieces per reel Applications Precision analog circuits Voltage dividers Signal conditioning Measurement and instrumentation systems Industrial and consumer electronics #CommonPartsLibrary #Resistor
0 Uses0 StarsRGT1608P-3323-B-T5
332 kOhms ±0.1% 0.063W, 1/16W Chip Resistor 0603 (1608 Metric) Anti-Sulfur, Automotive AEC-Q200 Thin Film The RGT1608P-3323-B-T5 is a surface-mount thick film chip resistor designed for general-purpose electronic applications. It features a compact 0603 (1608 metric) package, offering stable electrical performance, high reliability, and suitability for automated assembly. This resistor is commonly used in signal conditioning, voltage division, and current limiting circuits across consumer and industrial electronics. Key Features Compact 0603 (1608 metric) SMD package Thick film resistor technology High reliability and stability Suitable for reflow soldering RoHS compliant and lead-free Electrical Characteristics Resistance Value: 332 kΩ Resistance Tolerance: ±0.1% (B) Temperature Coefficient: ±25 ppm/°C (typical for precision grade) Rated Power: 0.1 W (1/10 W) Maximum Working Voltage: 75 V Maximum Overload Voltage: 150 V Mechanical Characteristics Package Size: 0603 (1608 Metric) Length: 1.6 mm Width: 0.8 mm Height: ~0.45 mm Environmental Specifications Operating Temperature Range: -55°C to +155°C Moisture Sensitivity Level: MSL 1 Thermal Shock: Complies with standard IEC test methods Packaging Information Packaging Type: Tape and Reel (T5) Reel Quantity: Typically 5,000 pieces per reel Applications Precision analog circuits Voltage dividers Signal processing Industrial control systems Consumer electronics #CommonPartsLibrary #Resistor #CRCW0603
0 Uses0 Stars
