Microcontrollers
A microcontroller is a small, low-cost computer-on-a-chip that can be used to control electronic devices and systems. It consists of a central processing unit (CPU), memory, input/output (I/O) ports, and other peripherals integrated onto a single chip. Microcontrollers are commonly used in a wide range of applications, including automotive systems, home appliances, industrial automation, and consumer electronics. One of the key benefits of microcontrollers is their ability to interact with their environment through sensors and actuators, making them well-suited for use in embedded systems. These systems are often found in devices that require real-time control or data processing, such as medical equipment, aircraft, and factory automation systems. Flux.ai is home to the world's largest community-driven public library of microcontrollers, with footprints, symbols, datasheets, and simulation models for a wide range of devices. Whether you're a professional engineer looking for a specific microcontroller for your next project, or a hobbyist exploring the possibilities of microcontroller-based systems, Flux.ai has the resources you need to get started.
SMV2020-079LF
Skyworks SMV2020-079LF hyperabrupt junction tuning varactor diode in a 2-terminal, surface-mount SC-79 package. Designed for voltage-controlled RF tuning applications, including oscillators and tunable filters. This is a variable-capacitance diode, not an NXP microcontroller.
0 Uses0 StarsABLS-4.897MHZ-20-R70-D-T
4.897 MHz Surface-Mount Quartz Crystal – AT-cut fundamental-mode quartz crystal designed for microcontrollers, wireless modules, communication equipment, industrial control systems, timing circuits, embedded electronics, and IoT devices. Part of the Abracon ABLS Series, it provides a 4.897 MHz operating frequency with ±50 ppm frequency tolerance, ±50 ppm frequency stability, 20 pF load capacitance, and 70 Ω maximum ESR for reliable clock generation. Features a 100 µW typical drive level (1 mW max), HC-49/US low-profile SMD package, and fundamental resonance mode for stable oscillator performance. Designed for surface-mount assembly, it operates over a −40°C to +85°C temperature range and is suitable for general-purpose embedded and industrial timing applications. #Abracon #ABLS4897MHZ20R70DT #QuartzCrystal #49MHzCrystal #ClockCrystal #TimingDevice #HC49US #SMDCrystal #Microcontroller #IndustrialElectronics #EmbeddedSystems
1 Uses0 StarsXU208-128-TQ64-C10
32-bit XCore multicore microcontroller designed for real-time embedded processing, featuring 8 logical cores with up to 500 MIPS performance (up to 1000 MIPS in dual-issue mode), 128 KB single-cycle SRAM, 8 KB OTP boot memory, 33 programmable I/O pins, and an integrated USB 2.0 PHY. Operates from a 0.95 V to 3.6 V supply, supports an external oscillator, and is housed in a 64-pin TQFP (10 × 10 mm) package. #XMOS #XU208 #XU208128TQ64C10 #Microcontroller #XCore #32BitMCU #Multicore #USB2 #128KBSRAM #TQFP64 #EmbeddedSystems
16 Uses0 StarsAS7341-DLGM
11-Channel Spectral Sensor Frontend The AS7341-DLGM is a multi-channel spectral sensor developed by ams OSRAM, designed for advanced color measurement, spectral analysis, and ambient light sensing applications. The device integrates multiple optical channels covering visible and near-infrared wavelengths, enabling precise detection of light characteristics across a broad spectrum. Its compact surface-mount package, integrated analog front-end, and digital processing capabilities make it suitable for consumer electronics, industrial instrumentation, smart lighting systems, display calibration, agricultural sensing, and portable analytical devices. The sensor features highly sensitive photodiodes combined with optical filters that allow accurate spectral discrimination. Communication is performed through a standard digital interface, facilitating integration with microcontrollers, embedded systems, and IoT platforms. The AS7341 supports configurable measurement modes, programmable gain control, and interrupt functions for efficient system-level implementation. Key Features Multi-channel spectral sensing architecture Visible and near-infrared light detection capability Integrated optical interference filters High-sensitivity photodiode array Ambient light sensing functionality Advanced color measurement and analysis Programmable gain and integration settings Digital output with I²C communication interface Low-power operating characteristics Integrated interrupt and event detection functions Compact surface-mount package Suitable for portable and battery-powered designs High accuracy across varying lighting conditions Supports spectral identification and classification applications Optimized for display, lighting, and environmental monitoring systems Applications Color measurement instruments Spectral analysis equipment Smart lighting control systems Display color calibration Industrial automation sensors Agricultural monitoring devices Ambient light sensing applications Consumer electronics Wearable devices IoT sensing platforms Scientific and laboratory instruments Optical monitoring systems Electrical and Functional Characteristics Multi-channel optical sensing engine Digital signal processing architecture Configurable integration timing Adjustable sensitivity and gain control Low-noise measurement performance High dynamic range operation Fast measurement response capability Integrated spectral filtering technology Embedded register-based configuration Interrupt-driven event monitoring support Mechanical Characteristics Compact surface-mount package PCB-friendly footprint RoHS-compliant construction Suitable for automated assembly processes Optimized optical window design #commonpartslibrary #sensor #opticalsensor #spectralsensor #colorsensor #ambientlightsensor #amsosram #embeddedsystems #industrialelectronics #iot #measurement #environmentalsensing #consumerelectronics #smartlighting #electronicsdesign
38 Uses0 StarsW25Q16JVUXIQ
SPI Flash Serial Flash Memory with Dual/Quad SPI The W25Q16JVUXIQ is a 16-Mbit (2-MByte) Serial NOR Flash memory device from Winbond. It is designed for embedded systems that require non-volatile code and data storage with minimal pin count, low power consumption, and high-speed access. The device supports standard SPI, Dual SPI, and Quad SPI interfaces, making it suitable for firmware storage, boot memory, IoT devices, microcontrollers, consumer electronics, and execute-in-place (XIP) applications. Key Features 16-Mbit (2-MByte) Flash Memory Capacity Operating Voltage: 2.7 V to 3.6 V Standard SPI, Dual SPI, and Quad SPI Interface Support Maximum SPI Clock Frequency: 133 MHz Equivalent Data Transfer Rates: 266 MHz (Dual SPI) 532 MHz (Quad SPI) Continuous Read and XIP (Execute-In-Place) Capability 4 KB Sector Erase, 32 KB Block Erase, 64 KB Block Erase, and Chip Erase 256-Byte Programmable Page Size Minimum 100,000 Program/Erase Cycles per Sector More Than 20 Years Data Retention Ultra-Low Power Consumption Typical power-down current below 1 µA 64-Bit Unique Serial Number Three 256-Byte Security Registers with OTP Protection JEDEC ID and SFDP Support Software and Hardware Write Protection Operating Temperature Options up to +85°C and +105°C Compact 8-Pad USON Package (2 mm × 3 mm) suitable for space-constrained designs #CommonPartsLibrary #IntegratedCircuit #Memory
279 Uses0 StarsSTM32G0B1CBT6
ARM-MSeries LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS ST Microelectronics STM32G0B1CBT6 LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL LCSC Part Number: C2847904 JLCPCB Part Class: Extended Part Manufactured by ST(意法半导体) STMicroelectronics STM32G0B1 series 32-bit Arm Cortex-M0+ microcontroller, up to 64MHz CPU frequency, 1.7V to 3.6V operating voltage, up to 512KB Flash memory and 144KB SRAM, USB 2.0 full-speed device/host support, USB Type-C Power Delivery controller, FDCAN, I2C, USART, SPI, HDMI CEC, 12-bit ADC, 12-bit DACs, timers, RTC, DMA, CRC unit, SWD debug interface, 96-bit unique ID, operating temperature options up to -40°C to +125°C, available in LQFP, UFQFPN, UFBGA and WLCSP packages. Search Keywords: STM32G0B1, STM32G0B1xB, STM32G0B1xC, STM32G0B1xE, STMicroelectronics STM32G0B1, STM32G0B1 MCU, STM32G0B1 microcontroller, Arm Cortex-M0+ microcontroller, STM32G0 64MHz MCU, STM32G0B1 USB Type-C PD, STM32G0B1 USB FS, STM32G0B1 FDCAN, STM32G0B1 512KB Flash, STM32G0B1 144KB SRAM, STM32G0B1 LQFP, STM32G0B1 UFQFPN, STM32G0B1 UFBGA, STM32G0B1 WLCSP, STM32G0B1 datasheet Hashtags: #STM32G0B1 #STM32G0B1xB #STM32G0B1xC #STM32G0B1xE #STMicroelectronics #STM32MCU #STM32G0 #ArmCortexM0Plus #32bitMicrocontroller #64MHzMCU #512KBFlashMCU #144KBSRAM #USBTypeCPD #USBFS #FDCAN #I2CMCU #SPIMCU #USARTMCU #ADCmicrocontroller #DACmicrocontroller #LQFP #UFQFPN #UFBGA #WLCSP
156 Uses0 StarsSTM32L031K6T6TR
ST Microelectronics STM32L031K6T6TR LQFP-32_L7.0-W7.0-P0.80-LS9.0-BL LCSC Part Number: C2054289 JLCPCB Part Class: Extended Part Manufactured by ST(意法半导体) STMicroelectronics STM32L031x4/6 ultra-low-power 32-bit ARM Cortex-M0+ microcontroller family, operating up to 32MHz, with up to 32KB Flash memory, 1KB EEPROM and 8KB SRAM. Features 12-bit ADC with hardware oversampling, ultra-low-power comparators, timers, RTC, watchdogs, SysTick, I2C, SPI, USART and low-power UART interfaces. Supports multiple internal/external clock sources, low-power modes, backup registers and operation from 1.8V to 3.6V supply, with power-down operation down to 1.65V. Suitable for low-power embedded, battery-powered, sensor, industrial and portable applications. Search Keywords: STM32L031x4, STM32L031x6, STM32L031, STMicroelectronics STM32L031, STM32L031 MCU, STM32L0 microcontroller, ARM Cortex-M0+ MCU, ultra low power STM32, 32MHz microcontroller, STM32 32KB Flash, STM32 EEPROM MCU, STM32L031 I2C SPI USART, STM32L031 low power UART, STM32L031 ADC, STM32L031 datasheet Hashtags: #STM32L031 #STM32L031x4 #STM32L031x6 #STMicroelectronics #STM32L0 #CortexM0Plus #ARMMicrocontroller #UltraLowPowerMCU #32MHzMCU #32KBFlash #EEPROMMCU #I2CMCU #SPIMCU #USARTMCU #LowPowerUART #ADC12bit
52 Uses0 StarsNX3225GD 8.000MHZ STD-CRA-3
The NX3225GD 8.000MHz STD-CRA-3 is a surface-mount quartz crystal resonator designed to provide a stable and accurate clock reference for electronic circuits. It is housed in a compact ceramic package suitable for space-constrained applications and is optimized for low power consumption and reliable frequency generation. This crystal is commonly used in microcontrollers, wireless communication modules, industrial control systems, consumer electronics, IoT devices, and embedded systems requiring precise timing and frequency control. Features Fundamental mode quartz crystal resonator Nominal frequency of 8.000 MHz Compact surface-mount ceramic package High frequency stability and accuracy Low equivalent series resistance Suitable for low-power oscillator circuits Excellent aging characteristics RoHS-compliant construction Designed for automated SMT assembly processes Reliable operation across industrial temperature environments Electrical Characteristics Crystal type: Quartz Crystal Resonator Frequency: 8.000 MHz Oscillation mode: Fundamental Load capacitance: Standard load capacitance configuration Frequency tolerance: Standard precision grade Frequency stability: Industrial-grade stability performance Equivalent series resistance optimized for MCU and RF oscillator circuits Low drive level operation High insulation resistance Mechanical Characteristics Surface-mount package Ceramic hermetic enclosure Compact footprint suitable for high-density PCB layouts Compatible with standard reflow soldering processes Designed for automated pick-and-place assembly Applications Microcontroller clock generation Wireless communication devices Bluetooth and RF modules IoT and smart devices Industrial automation equipment Embedded control systems Consumer electronics Timing and synchronization circuits Sensor interface modules Portable battery-powered products Compliance RoHS compliant Lead-free package Environmentally friendly manufacturing standards Suitable for commercial and industrial electronic applications #commonpartslibrary #crystal #quartzcrystal #frequencycontrol #timingdevice #clocksource #oscillator #smtcomponent #embeddedsystems #wirelesscommunication #industrialelectronics #consumerelectronics #iotdevices #passivecomponents #electroniccomponents
43 Uses0 StarsNX3225GD-8MHZ-STD-CRA-3
CRYSTAL 8MHz 8pF SMD The NX3225GD-8MHZ-STD-CRA-3 is an automotive-grade surface-mount quartz crystal unit from NDK designed to provide a stable 8 MHz clock reference for microcontrollers, automotive ECUs, and embedded systems. It belongs to the NX3225GD series and is optimized for high reliability under harsh environmental conditions. Key Features 8 MHz fundamental-mode crystal Compact 3.2 mm × 2.5 mm × 1.0 mm SMD package 8 pF load capacitance ±50 ppm frequency tolerance ±150 ppm frequency stability over temperature Automotive-qualified with AEC-Q200 compliance Wide operating temperature range: −40°C to +150°C Excellent resistance to heat, vibration, shock, and solder cracking Stable startup characteristics in severe environments RoHS compliant Typical Applications Automotive engine control units (ECUs) MCU and CPU clock generation Industrial embedded systems Communication equipment Consumer electronics and IoT devices #CommonPartsLibrary #crystal oscillator #resonator
335 Uses0 Stars
