LEDs
A LED (light-emitting diode) is a small, energy-efficient light source that is commonly used in a variety of applications. LED technology has advanced significantly in recent years, making it a popular choice for a wide range of lighting needs. LEDs are known for their low power consumption, long lifespan, and ability to produce a bright, directional light. One of the primary use cases for LEDs is in general lighting, where they are used in everything from residential and commercial lighting to automotive and aviation lighting. LEDs are also commonly used in electronic displays, such as TVs, computer monitors, and smartphones, as well as in signaling and indication applications, such as traffic lights and exit signs. If you are looking for high-quality LED resources, flux.ai has the world's largest community-driven public library of LED footprints, symbols, datasheets, and simulation models. Whether you are a designer, engineer, or manufacturer, you can find the resources you need to work with LEDs in your projects.
IRLML6244TRPBF
MOSFET N-CH 20V 6.3A SOT-23 The IRLML6244TRPBF is an N-channel enhancement-mode power MOSFET from Infineon Technologies (originally International Rectifier HEXFET series). It is designed for low-voltage power switching applications such as load switching, DC-DC converters, and LED control. It comes in a compact SOT-23 (Micro3™) surface-mount package, making it suitable for space-constrained PCB designs while still handling relatively high current for its size. Key Features Drain-Source Voltage (VDS): 20 V Continuous Drain Current: up to ~6.3 A (at 25°C) Very low RDS(on): ~21 mΩ @ VGS = 4.5 V ~27 mΩ @ VGS = 2.5 V Low gate threshold voltage (~0.5–1.1 V typical range) (note: not a switching guarantee) Gate-to-source voltage rating: ±12 V Low power loss due to low on-resistance High efficiency switching for low-voltage systems Power dissipation: ~1.3 W (thermal limited in SOT-23 package) Fast switching performance (low gate charge ~8.9 nC) Operating temperature range: −55°C to +150°C RoHS compliant (lead-free, halogen-free) Typical Applications Low-side load switching (MCUs, GPIO control) LED strip / RGB LED drivers Battery-powered systems DC-DC converter switching Small motor or relay driving General-purpose power management in compact electronics Important Design Note Even though it has a low VGS(th), this MOSFET is not selected based on threshold voltage. What matters is the RDS(on) at your gate drive voltage (2.5 V / 3.3 V / 5 V) to ensure it fully turns on with minimal heating. #CommonPartsLibrary #Transistor #FET #IRLML6244 #MOSFET #NChannelMOSFET #PowerElectronics #SOT23 #Infineon #HEXFET #LEDDriver #LowSideSwitch #ElectronicsComponents
248 Uses0 StarsIRLML2502
MOSFET N-CH 20V 3.6A SOT-23 The IRLML2502 is a small-signal N-channel enhancement mode power MOSFET designed for low-voltage, high-efficiency switching applications. It is commonly used as a load switch or power control transistor in compact electronic systems such as battery-powered devices, LED drivers, and DC-DC converters. It features a low on-resistance (RDS(on)), which allows it to switch higher currents with minimal power loss and heat generation. The device is optimized for logic-level gate drive, meaning it can be driven directly from microcontrollers (like 3.3 V or 5 V systems). It is packaged in a compact SOT-23 (Micro3) surface-mount package, making it suitable for space-constrained PCB designs. Key Features N-channel enhancement mode MOSFET Drain-source voltage (VDS) up to 20 V Continuous drain current up to ~4.2 A (at 25°C) Very low RDS(on) ≈ 45 mΩ @ VGS = 4.5 V Logic-level gate drive capability (works with 2.5–4.5 V signals) Fast switching performance Compact SOT-23 (Micro3) surface-mount package Low gate charge for efficient switching Suitable for battery-powered and low-voltage applications RoHS compliant, lead-free design #IRLML2502 #MOSFET #NChannelMOSFET #PowerElectronics #SOT23 #LogicLevelMOSFET #PowerSwitch #ElectronicComponents #EmbeddedSystems #PCBDesign
382 Uses0 StarsOMGS3-01
OMGS3 ultra-compact ESP32-S3 board/module, based on dual-core Xtensa LX7 32-bit processor up to 240MHz with RISC-V ultra-low-power coprocessor, 2.4GHz Wi-Fi 802.11b/g/n and Bluetooth LE 5.0, 8MB QSPI Flash and 2MB QSPI PSRAM, integrated 3D high-gain antenna, RGB LED, PMIC, MAX17048G+T10 fuel gauge, 700mA 3.3V LDO regulator, LiPo battery charging, native USB and USB Serial/JTAG support, Qwiic/QT connector, 17 GPIOs, ultra-low deep sleep current, compact 25 x 10mm size. Search Keywords: OMGS3, Unexpected Maker OMGS3, ESP32-S3 module, ESP32-S3 board, ultra compact ESP32-S3, ESP32-S3 WiFi Bluetooth board, ESP32-S3 8MB flash 2MB PSRAM, ESP32-S3 LiPo charger, ESP32-S3 fuel gauge, MAX17048 fuel gauge, Qwiic ESP32-S3 board, tiny ESP32-S3 module Hashtags: #OMGS3 #UnexpectedMakerOMGS3 #ESP32S3 #ESP32S3Board #ESP32S3Module #WiFiBluetoothBoard #BLE5 #8MBFlash #2MBPSRAM #LiPoCharger #FuelGauge #MAX17048 #QwiicConnector #TinyESP32S3 #IoTModule
3 Uses0 StarsGL850G-HH
GL850G USB 2.0 Low-Power HUB Controller, SSOP-28 Genesys Logic GL850G USB 2.0 low-power hub controller, fully compliant with USB 2.0 specification, single transaction translator hub solution with 5V to 3.3V and 3.3V to 1.8V integrated voltage regulators, embedded 8-bit RISC processor, external EEPROM support for customized VID/PID and port configuration, individual or gang power management, two-color status LED support, power-enable polarity selection, low power consumption and low BOM design, suitable for docking stations, embedded systems, USB hubs and low/full-speed USB device expansion. Search Keywords: GL850G, Genesys Logic GL850G, GL850G USB hub controller, USB 2.0 hub controller, low power USB hub IC, single TT USB hub controller, GL850G hub IC, Genesys USB hub controller, GL850G EEPROM VID PID, 4 port USB hub controller, USB 2.0 low power hub, GL850G datasheet Hashtags: #GL850G #GenesysLogicGL850G #GenesysLogic #USBHubController #USB20Hub #LowPowerUSBHub #SingleTTHub #HubControllerIC #USBController #EmbeddedUSBHub #EEPROMConfigurable #VIDPIDConfig #4PortUSBHub
9 Uses0 StarsLRTBGWSR-4U4V-JW+8A8B-D8-3S4U-7Z
Red, Green, Blue (RGB) 626nm Red, 528nm Green, 465nm Blue LED Indication - Discrete 2.15V Red, 2.65V Green, 2.85V Blue 6-PLCC The LRTBGWSR-4U4V-JW+8A8B-D8-3S4U-7Z is an automotive-grade RGB surface-mount LED from the OSIRE® E3635 family by ams OSRAM. It integrates independently controllable red, green, and blue LED chips within a compact 6-PLCC package, enabling precise color mixing and dynamic lighting effects. The device is designed for high-reliability applications requiring full-color illumination, status indication, ambient lighting, and display backlighting. Its wide viewing angle, high luminous intensity, and AEC-Q102 qualification make it suitable for automotive interior lighting, industrial controls, consumer electronics, and advanced human-machine interface applications. Features - Package: white PLCC-6 package, silicone resin - Chip technology: Thinfilm / Volume emitter on Sapphire (AlInGaN) - Typ. Radiation: 120° (Lambertian emitter) - Color: λdom = 626 nm (● red); λdom = 528 nm (● true green); λdom = 465 nm (● blue) - Corrosion Robustness Class: 3B - Qualifications: AEC-Q102 Qualified - ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) Applications - Ambient Lighting - Automotive Aftermarket #CommonPartsLibrary #LED #RGBLED #OSRAM #amsOSRAM #OSIREE3635 #AutomotiveLED #AECQ102 #SMDLED #PLCC6 #IndicatorLED #AmbientLighting #ColorMixing #LRTBGWSR_4U4V_JW_8A8B_D8_3S4U_7Z
5 Uses0 StarsIR7393C
Infrared (IR) Emitter 940nm 1.2V 100mA 4mW/sr @ 20mA 60° Radial IR7393C Infrared LED Engineering Specification ## General Description The IR7393C is a high-performance infrared emitter designed for sensing, communication, and illumination applications. Manufactured by Everlight Electronics, this LED provides stable infrared output suitable for remote controls, proximity sensors, object detection systems, and other electronic devices requiring infrared illumination. Its compact radial package allows for easy integration into both consumer and industrial electronic assemblies, providing reliable and consistent infrared emission over its operational lifespan. This LED offers robust performance in a wide range of operating conditions, making it suitable for demanding environments. ## Features * Infrared light emission optimized for sensing and communication applications * Standard radial through-hole package for easy PCB integration * High radiant intensity with consistent output * Low power consumption for energy-efficient designs * Reliable performance across temperature variations * Long operational lifetime with stable infrared output * RoHS compliant and environmentally friendly construction * Compatible with automated assembly processes ## Electrical Characteristics * Peak Wavelength: Infrared spectrum suitable for sensing applications * Forward Voltage: Optimized for standard current drive * Forward Current: Continuous operation within rated limits * Reverse Voltage: Safe handling within specified limits * Radiant Intensity: Designed for consistent infrared illumination * Viewing Angle: Moderate beam angle suitable for detection and communication ## Mechanical Characteristics * Package Type: Radial LED * Mounting Style: Through-hole radial leads * Compact design for integration into a variety of electronic devices * Durable epoxy lens for reliable infrared emission ## Applications * Proximity sensors and object detection * Infrared communication systems * Remote control transmitters * Industrial sensing and automation * Consumer electronic devices * IoT devices requiring infrared illumination * Robotic sensors and navigation systems ## Compliance * RoHS Compliant * Lead-free construction * Suitable for automated assembly processes #IR7393C #Everlight #InfraredLED #RadialLED #IREmitter #Sensing #RemoteControl #ProximitySensor #ObjectDetection #ElectronicsDesign #EmbeddedSystems
13 Uses0 StarsAPTR3216SURCK
Red 630nm LED Indication - Discrete 1.95V 1206 (3216 Metric) APTR3216SURCK – Surface-mount RGB light-emitting diode in a compact 3528 package with a common-cathode configuration. Integrates red, green, and blue emitters within a single package, enabling full-color indication, color mixing, and visual status signaling. Suitable for consumer electronics, embedded systems, control panels, backlighting, decorative lighting, and user-interface applications. Designed for reliable operation, consistent brightness, and efficient PCB assembly in space-constrained designs. #RGBLED #CommonCathode #3528LED #SMDLED #IndicatorLED #ColorMixing #EmbeddedSystems #ConsumerElectronics #LightingDesign #PCBAssembly
6 Uses0 StarsTCA39416DTWR
Voltage Level Translator Bidirectional 1 Circuit 2 Channel 26Mbps 8-XSON (1.35x1) The TCA39416DTWR is a high-performance LED driver and multiplexer IC designed for precise control of multi-channel lighting applications. It integrates constant-current drivers, digital dimming capability, and multiplexing functionality to efficiently manage a large array of LEDs in industrial, automotive, display, and general-purpose lighting systems. The device supports high-speed operation and flexible channel configuration, ensuring uniform brightness control, low electromagnetic interference, and robust performance in space-constrained designs. Its compact surface-mount package and integrated control features make it ideal for embedded lighting solutions requiring reliable, accurate, and scalable LED management. Engineering Specifications Manufacturer: Texas Instruments Part Number: TCA39416DTWR Device Type: LED Driver and Multiplexer IC Channel Count: Multi-Channel LED Control Driver Type: Constant-Current LED Driver Dimming Control: Digital PWM Dimming Supported Multiplexing: Integrated Multiplexer Functionality Input Interface: Digital Control Inputs Output Configuration: Sinking LED Channels Supply Voltage Range: Wide Operating Range Switching Frequency: High-Speed LED Operation Thermal Management: Efficient Power Dissipation Design Package Type: TSSOP Surface-Mount Package Mounting Style: Surface Mount Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Industrial LED Lighting, Automotive Light Arrays, Display Backlighting, Status Indicators, Embedded LED Systems, Digital Signage, Instrumentation Panels, Multi-Channel LED Control Key Features Multi-channel constant-current LED drivers Integrated digital dimming via PWM control Built-in multiplexing for efficient channel management Compact surface-mount package for PCB integration High-speed operation for flicker-free lighting Low power consumption and thermal optimization Reliable performance in industrial and automotive environments Uniform brightness control across channels Flexible configuration for scalable LED arrays Designed for embedded lighting and display applications #TCA39416DTWR #TexasInstruments #LEDDriver #MultiplexerIC #MultiChannelLED #PWMDimming #EmbeddedLighting #IndustrialElectronics #AutomotiveLighting #DisplayBacklight #LEDControl #SurfaceMountIC #ElectronicComponents #PCBDesign #LEDArray #HighSpeedLED #IndustrialGrade #SignalControl #PowerEfficient #LightingElectronics
0 Uses0 StarsAL8866QSP-13
LED Driver IC 1 Output DC DC Controller SEPIC, Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 8-SO-EP # AL8866QSP-13 Engineering Specifications **General Description** The AL8866QSP-13 is an automotive-qualified, multi-topology DC-switching LED controller manufactured by Diodes Incorporated. It is designed to control an external power MOSFET for high-power automotive LED lighting systems. The device supports buck, boost, buck-boost and single-ended primary-inductance converter configurations. Its wide input-voltage range makes it suitable for automotive power systems and various high-voltage LED applications. The controller uses fixed-frequency peak current-mode regulation with spread-spectrum frequency modulation to reduce electromagnetic interference. It supports both analog and pulse-width-modulation dimming through the DIM input. An integrated programmable soft-start function gradually increases the inductor and switching currents during startup to reduce output-voltage and current stress. The open-drain fault output provides system-level fault reporting for abnormal operating conditions. **Engineering Specifications** **Manufacturer:** Diodes Incorporated **Manufacturer Part Number:** AL8866QSP-13 **Component Type:** Automotive LED driver controller **Converter Topologies:** Buck, boost, buck-boost and SEPIC **Control Architecture:** Fixed-frequency peak current-mode control **External Switching Device:** External power MOSFET **Minimum Input Voltage:** Four point seven volts **Maximum Input Voltage:** Eighty-five volts **Maximum Output Voltage:** Eighty-five volts **Switching Frequency:** Four hundred kilohertz **Frequency Modulation:** Spread-spectrum modulation for reduced electromagnetic interference **LED Current Control:** External current-sense resistor and external MOSFET configuration **Feedback Voltage:** Two hundred millivolts **Typical Quiescent Current:** One point eight milliamperes **Typical Efficiency:** Up to approximately ninety-three percent, depending on the application circuit and external components **Dimming Methods:** Analog dimming and pulse-width-modulation dimming **Analog Dimming Range:** One percent to one hundred percent **Analog Dimming Dynamic Range:** Greater than one hundred to one **Pulse-Width-Modulation Dimming Ratio:** One hundred to one at a two-hundred-hertz dimming frequency **Pulse-Width-Modulation Frequency Range:** Approximately one hundred hertz to one kilohertz **Full-Brightness Current Accuracy:** Approximately plus or minus three percent **Low-Level Dimming Current Accuracy:** Approximately plus or minus twelve percent at twenty-percent dimming **Soft-Start Function:** Externally programmable **Fault Output:** Active-low open-drain fault indicator **Protection Features:** Output overvoltage protection, LED open-circuit protection, output undervoltage protection, LED short-circuit protection, cycle-by-cycle overcurrent limitation, current-sense resistor short-circuit protection, inductor and diode short-circuit detection, diode open-circuit protection and thermal shutdown **Automotive Qualification:** AEC-Q100 Grade One qualified **Automotive Documentation:** PPAP capable **Manufacturing Standard:** Manufactured in IATF-certified automotive facilities **Operating Temperature Range:** Minus forty degrees Celsius to positive one hundred twenty-five degrees Celsius **Package Type:** Thermally enhanced SO-8 exposed-pad package **Pin Count:** Eight leads with exposed thermal ground pad **Mounting Style:** Surface mount **Packing Method:** Thirteen-inch tape and reel **Standard Packing Quantity:** Two thousand five hundred components per reel **Moisture Sensitivity:** Level One **Terminal Finish:** Matte-tin-plated leads **Environmental Compliance:** Lead-free, RoHS compliant, halogen-free and antimony-free **Typical Applications** Automotive high-beam and low-beam lighting Automotive daytime running lights Automotive fog lights Automotive turn-signal lights Automotive position lights Automotive brake and stop lights High-power exterior LED lighting Multi-topology automotive LED driver modules #AL8866QSP13 #AL8866Q #DiodesIncorporated #LEDDriver #AutomotiveLED #AutomotiveElectronics #BuckConverter #BoostConverter #BuckBoostConverter #SEPICConverter #PowerElectronics #LEDLighting #ElectronicComponents #EngineeringSpecifications
5 Uses0 Stars
