Interface ICs
An interface IC is a type of integrated circuit that is designed to facilitate communication between two devices or systems. These devices are commonly used in electronic systems to enable the transfer of data and control signals between different components or subsystems. Some common use cases for interface ICs include connecting microcontrollers to peripherals such as sensors or displays, linking multiple processors together in a network, and enabling communication between devices using different communication protocols. Flux.ai has the world's largest community-driven public library of interface ICs, with footprints, symbols, datasheets, and simulation models. This library is a valuable resource for engineers and designers who need access to accurate and up-to-date information on these important components. Whether you are working on a new design project or simply looking to learn more about interface ICs, Flux.ai is an excellent resource to help you find the information you need.
SO_IVEG600
IC HALF BRIDGE DRVR 5.5A/6A 16SO STDRIVEG600 single-chip half-bridge gate driver for enhancement-mode GaN FETs and N-channel power MOSFETs, high-side voltage up to 600V, suitable for bus voltages up to 500V, designed for high-speed GaN and Si FET driving, high current capability, short propagation delay, supply voltage down to 5V, UVLO protection on high-side and low-side sections, interlocking function to prevent cross-conduction, 3.3V CMOS/TTL compatible logic inputs for MCU/DSP interface.
0 Uses0 Stars77313-118-22LF
Connector Header Through Hole 22 position 0.100" (2.54mm) Pin Header 02x22 2.54mm Vertical The 77313-118-22LF is a 2.54 mm pitch unshrouded vertical pin header connector from the Amphenol ICC (FCI) BergStik® series. It is designed for board-to-board and wire-to-board interconnections in embedded systems, industrial electronics, prototyping, and general PCB applications. The connector features a double-row, 22-position through-hole configuration with gold-plated phosphor bronze contacts for reliable electrical performance and durability. Key Features 22-position dual-row header 2.54 mm (0.100") pitch Vertical through-hole mounting Unshrouded male pin header BergStik® series Gold-plated contacts for improved conductivity and corrosion resistance Phosphor bronze contacts with thermoplastic housing Current rating: up to 3 A per contact Operating temperature: −65°C to +130°C UL94 V-0 flame-rated housing RoHS compliant Suitable for: MCU and development boards Mezzanine board stacking Ribbon cable interfaces General-purpose PCB interconnects #CommonPartsLibrary #Connector #Header
6 Uses0 StarsBME690
Gas, Humidity, Pressure, Temperature Sensor Digital Output The BME690 is a compact 4-in-1 environmental sensor from Bosch Sensortec designed for advanced indoor air-quality monitoring. It integrates gas, humidity, temperature, and barometric pressure sensing into a single low-power MEMS device. The sensor is optimized for battery-powered and high-condensation environments, making it suitable for smart home, industrial, wearable, and IoT applications. Key Features 4-in-1 environmental sensing: Gas sensing Relative humidity Temperature Barometric pressure Detects: Volatile Organic Compounds (VOCs) Volatile Sulfur Compounds (VSCs) Other air-quality-related gases Supports indoor air quality (IAQ) monitoring Provides: IAQ index bVOC equivalent CO₂ equivalent outputs Improved robustness for high-condensation environments Ultra-small package: 3.0 × 3.0 × 0.93 mm 8-pin metal LGA package Low power consumption suitable for battery-powered devices Interfaces: I²C up to 3.4 MHz SPI up to 10 MHz Wide operating range: Temperature: −40°C to +85°C Humidity: 0–100% RH Pressure: 300–1100 hPa Supply voltage: VDDIO: 1.2 V to 3.6 V VDD: 1.71 V to 3.6 V Humidity accuracy: ±3% RH Temperature accuracy: ±0.5°C Pressure accuracy: ±0.5 hPa absolute Supports AI-based gas classification using Bosch BME AI-Studio Pin-compatible evolution of the BME688 platform Designed for: Smart home devices HVAC systems Air-quality mapping Food freshness monitoring Wearables Industrial sensing applications #CommonPartsLibrary #Sensor
12 Uses0 StarsOPA4391PWR
Standard (General Purpose) Amplifier 4 Circuit Push-Pull, Rail-to-Rail 14-TSSOP The OPA4391PWR is a precision quad operational amplifier designed for low-noise, high-speed signal conditioning in a wide range of analog applications. It integrates four independent amplifier channels within a single compact package, making it suitable for space-constrained designs that require consistent performance across multiple signal paths. The device offers a combination of low offset voltage, wide bandwidth, and fast slew rate, enabling accurate amplification of both small and rapidly changing signals. It is commonly used in instrumentation, data acquisition systems, active filtering, and audio signal processing where stability and signal integrity are critical. Functional Overview The device consists of four matched operational amplifiers that share common power supply connections while maintaining independent signal paths. Each amplifier is capable of operating in standard configurations such as inverting, non-inverting, differential, and buffer modes. The architecture supports rail-to-rail output swing, allowing efficient use of the available supply voltage. Internal design optimization ensures low distortion and stable operation across a broad range of load conditions. Electrical Characteristics The OPA4391PWR is optimized for low input offset voltage and low input bias current, contributing to high accuracy in precision applications. It features wide gain bandwidth and a high slew rate, supporting fast transient response and high-frequency operation. The amplifier maintains low noise performance, making it suitable for sensitive analog front-end designs. Power consumption is balanced to provide efficient operation without compromising dynamic performance. Operating Conditions The device operates over a wide supply voltage range, supporting both single-supply and dual-supply configurations. It is designed to function reliably across an extended temperature range, ensuring consistent performance in varying environmental conditions. Proper decoupling and layout practices are recommended to maintain stability and minimize noise coupling. Package and Mechanical Characteristics The OPA4391PWR is provided in a compact surface-mount package suitable for automated assembly processes. The package is designed to facilitate efficient thermal dissipation and reliable electrical connections. Pin configuration allows straightforward integration into standard PCB layouts for quad operational amplifiers. Applications This device is intended for use in precision analog circuits including signal conditioning, sensor interfaces, active filters, audio amplification, and data acquisition systems. Its combination of low noise, high speed, and multi-channel integration makes it well-suited for both industrial and consumer electronics applications. Design Considerations Careful PCB layout is recommended to optimize performance, including short signal paths, proper grounding, and adequate power supply decoupling. Input and output traces should be routed to minimize interference and crosstalk between channels. Thermal management should be considered in high-performance or high-density designs to ensure long-term reliability. #commonpartslibrary #integratedcircuit #linearamplifier #opamp
6 Uses0 StarsSMAJ33A-13-F
53.3V Clamp 7.5A Ipp Tvs Diode Surface Mount SMA TVS diode SMA 33V The SMAJ33A-13-F is a surface-mount transient voltage suppression (TVS) diode designed to protect sensitive electronic components from voltage spikes and transient events. It is typically used in circuits exposed to electrostatic discharge, inductive load switching, and other transient voltage conditions. The device operates by clamping excessive voltage to a safe level, thereby preventing damage to downstream components. Its compact surface-mount package enables efficient use of board space while maintaining reliable thermal and electrical performance. Device Overview This component is constructed using silicon avalanche technology, providing fast response time to transient events. It is intended for use in high-reliability applications where overvoltage protection is critical. The unidirectional configuration ensures effective suppression in circuits with a defined polarity. The device is optimized for low leakage current under normal operating conditions and high surge capability during transient events. Electrical Characteristics The diode is designed to operate with a defined stand-off voltage, ensuring it remains non-conductive during normal system operation. Upon exceeding the breakdown threshold, the device transitions into conduction, clamping the voltage to a specified level. It supports high peak pulse power dissipation and is capable of handling repeated transient events without significant degradation. Mechanical and Packaging Information The device is provided in a compact surface-mount package suitable for automated assembly processes. The package is designed for efficient heat dissipation and mechanical robustness, supporting standard reflow soldering techniques. Terminal finishes are compatible with common PCB manufacturing processes and ensure reliable solder joints. Applications Suitable for use in consumer electronics, industrial control systems, telecommunications equipment, and automotive electronics where protection against voltage transients is required. Common use cases include power supply lines, data lines, and interface ports. Environmental and Reliability Considerations The component is designed to meet standard environmental and reliability requirements for electronic components. It is suitable for operation across a wide temperature range and is built to withstand typical handling and assembly stresses. #commonpartslibrary #circuitprotection #tvsdiode
289 Uses0 StarsMJ-63022B
6.35mm (0.250", 1/4") - Headphone Phone Jack Mono Connector Solder 6.35mm mono jack PCB The MJ-63022B is a right-angle, through-hole mounted 6.35 mm mono audio jack connector manufactured by Same Sky (formerly CUI Devices). The component is designed for PCB-mounted audio signal applications requiring a durable female phone jack interface with an internal switching mechanism. The connector supports mono audio transmission and is suitable for consumer, industrial, and embedded electronic systems where compact horizontal mounting is required. Mechanical Specification Connector type: Audio phone jack, female receptacle Audio standard: 6.35 mm (1/4 inch) mono Mounting orientation: Horizontal / right angle Mounting method: Through-hole PCB mount Number of conductors: 2 Number of contacts: 3 Internal switch configuration: Single switch / tip switch Thread size: M12 Mating depth: 31.00 mm Body color: Black Shielding: Unshielded Housing material: Polybutylene Terephthalate (PBT) Contact material: Phosphor bronze Contact plating: Silver Electrical Specification Rated voltage: 12 VDC Current rating: 1 A Signal type: Mono audio Termination type: Solder Environmental Specification Operating temperature range: -25 °C to +70 °C RoHS compliance: RoHS3 compliant REACH status: REACH unaffected Functional Features Supports standard 6.35 mm mono audio plugs Provides PCB space savings through right-angle orientation Integrated internal switch enables signal routing or detection functionality Designed for repeated insertion and removal cycles in audio applications Recommended Applications Audio amplifiers Musical instrument equipment Embedded audio systems Industrial control interfaces Consumer electronics audio input/output systems #commonpartslibrary #connector #headphone #jack
101 Uses0 Stars
