Interface ICs
An interface IC is a type of integrated circuit that is designed to facilitate communication between two devices or systems. These devices are commonly used in electronic systems to enable the transfer of data and control signals between different components or subsystems. Some common use cases for interface ICs include connecting microcontrollers to peripherals such as sensors or displays, linking multiple processors together in a network, and enabling communication between devices using different communication protocols. Flux.ai has the world's largest community-driven public library of interface ICs, with footprints, symbols, datasheets, and simulation models. This library is a valuable resource for engineers and designers who need access to accurate and up-to-date information on these important components. Whether you are working on a new design project or simply looking to learn more about interface ICs, Flux.ai is an excellent resource to help you find the information you need.
2147210080
8 Position Header Connector 0.031" (0.80mm) Surface Mount, Right Angle Tin Board-to-Board Header: Provides an 8-circuit electrical interface for PCB connections. This Molex Zero-Hachi header features a single-row, right-angle, surface-mount configuration with 0.80 mm pitch, friction lock, shrouded housing, and matte tin plating. It is rated for an operating temperature range of −40°C to +105°C. #Molex #Connector #PCBHeader #BoardToBoard
0 Uses0 StarsUSB2422-I/MJ
USB Hub Controller USB 2.0 USB Interface 24-QFN (4x4) USB 2.0 Hi-Speed hub controller that provides two downstream USB ports with a USB 2.0 upstream interface. It supports high-speed 480 Mbps, full-speed 12 Mbps, and low-speed 1.5 Mbps USB operation, operates from a 3.3 V supply, and is housed in a 28-pin QFN package. #USB #USB2 #USBHub #Microchip #USB2422
14 Uses0 StarsCC1312R74T0RGZR
Sub-1 GHz Wireless MCU – Multiprotocol wireless microcontroller with a 48 MHz Arm Cortex-M4F CPU, 704 KB Flash, 144 KB SRAM, and integrated Sub-1 GHz RF transceiver. It supports Bluetooth 5.2, Thread, Zigbee, and Wireless M-Bus, with operating frequencies from 287 MHz to 1.315 GHz, up to 500 kbps data rate, and up to +14 dBm output power. It provides I²C, I²S, SPI, UART, and GPIO interfaces and operates from 1.8–3.8 V over −40°C to +105°C. The device is housed in a 48-pin VQFN (7 × 7 mm) package. #TexasInstruments #CC1312R74T0RGZR #WirelessMCU #Sub1GHz #RFTransceiver #Bluetooth #Thread #Zigbee #WirelessMBus #CortexM4F #IoT #EmbeddedSystems
3 Uses0 StarsXBP9B-DMST-002
General ISM < 1GHz Transceiver Module 900MHz Antenna Not Included, RP-SMA Through Hole RF Transceiver Module for DigiMesh wireless networking in the 902–928 MHz band, supporting 200 Kbps RF data rates and up to 24 dBm (250 mW) transmit power. It operates from 2.4–3.6 VDC and provides UART and SPI interfaces, with an RP-SMA antenna connection and through-hole mounting. #RFTransceiver #DigiMesh #900MHz #WirelessModule #UART #SPI #ThroughHole
1 Uses0 StarsMECT-110-01-M-D-RA1
20 Position SFP+ Receptacle Connector Solder Surface Mount, Right Angle Right-angle edge card connector designed for SFP/SFP+ transceiver interfaces, featuring 20 positions in a dual-row, 0.80 mm pitch configuration for 1.00 mm thick cards. The connector uses a black LCP insulator and phosphor bronze contacts, with a 2 A current rating per pin, 265 VAC voltage rating, and an operating temperature range of −55°C to +125°C. #SFP #SFPPlus #EdgeConnector #Samtec #PCB
6 Uses0 StarsESP32-C3-MINI-1-H4X
Wi-Fi & Bluetooth LE Module – 2.4 GHz wireless module based on the ESP32-C3, providing IEEE 802.11b/g/n Wi-Fi and Bluetooth 5.0 LE connectivity. The Espressif ESP32-C3-MINI-1-H4X includes 4 MB Quad-SPI flash, a PCB trace antenna, and interfaces including UART, SPI, I²C, I²S, USB, JTAG, and PWM. It operates from 3.0–3.6 V, supports data rates up to 150 Mbps, and is rated for −40°C to +105°C operation. The module uses a 61-pin SMD package measuring approximately 13.2 × 16.6 × 2.4 mm. #Espressif #ESP32C3 #ESP32C3MINI1 #WiFi #BluetoothLE #WirelessModule #IoT #EmbeddedSystems #Microcontroller
185 Uses0 StarsSTM32G0B1KBT6
32-Bit Microcontroller – ARM Cortex-M0+ MCU with up to 64 MHz CPU frequency, 128 KB Flash and 144 KB RAM. The STMicroelectronics STM32G0B1KBT6 operates from 1.7 V to 3.6 V and integrates 12-bit ADCs and DACs, I²C, SPI, USART/UART, USB 2.0, CAN, and USB Type-C Power Delivery interfaces. It provides 30 GPIOs and is available in a 32-pin LQFP (7 × 7 mm) package, with an operating temperature range of −40°C to +85°C. #STMicroelectronics #STM32G0B1KBT6 #Microcontroller #MCU #ARM #CortexM0Plus #32Bit #EmbeddedSystems #I2C #SPI #UART #USB #CAN
3 Uses0 StarsPCIE-164-02-F-D-TH
PCI Express® 3.0 Edge Card Connector – 164-position female PCIe connector designed to provide a high-speed interface between a PCI Express card and PCB. The Samtec PCIE-164-02-F-D-TH features a 1.00 mm pitch, dual-row configuration, through-hole vertical mounting, and accepts 1.57–1.60 mm thick cards. It supports PCIe 3.0 with 1, 4, 8, or 16 PCI Express links, and has a 2.4 A maximum current rating and 215 VAC / 304 VDC maximum voltage rating. The contacts are phosphor bronze with gold plating, with a PA66 nylon insulator, and the connector operates from −55°C to +125°C. #Samtec #PCIE164 #PCIExpress #PCIe3 #EdgeCardConnector #PCIeConnector #164Position #ThroughHole #HighSpeedConnector #PCBConnector
15 Uses0 StarsMFS2633AMDA0AD
System Basis Chip PMIC 48-LQFP-EP (7x7) Power Management IC that integrates multiple voltage regulators, monitoring, and system protection functions for automotive applications. The FS26 family supports input voltages up to 60 V and includes multiple configurable power outputs, CAN FD and FlexRay interfaces, watchdog functionality, and safety monitoring features. It is provided in a 48-pin LQFP package. #PowerManagement #Automotive #PMIC #NXP #FS26 #CANFD #FlexRay
0 Uses0 Stars
