Interface ICs
An interface IC is a type of integrated circuit that is designed to facilitate communication between two devices or systems. These devices are commonly used in electronic systems to enable the transfer of data and control signals between different components or subsystems. Some common use cases for interface ICs include connecting microcontrollers to peripherals such as sensors or displays, linking multiple processors together in a network, and enabling communication between devices using different communication protocols. Flux.ai has the world's largest community-driven public library of interface ICs, with footprints, symbols, datasheets, and simulation models. This library is a valuable resource for engineers and designers who need access to accurate and up-to-date information on these important components. Whether you are working on a new design project or simply looking to learn more about interface ICs, Flux.ai is an excellent resource to help you find the information you need.
LSM6DSV16BXTR
6-Axis Inertial Measurement Unit (IMU) with Embedded Sensor Fusion and AI Features – Advanced motion-sensing IC combining a 3-axis digital accelerometer and 3-axis digital gyroscope, designed for wearables, TWS earbuds, smartphones, gaming devices, robotics, IoT products, motion tracking, vibration detection, and low-power embedded applications. The STMicroelectronics LSM6DSV16BXTR also includes an integrated temperature sensor and supports I²C, I3C, and SPI digital interfaces. The device features triple accelerometer and gyroscope channels, embedded sensor-fusion processing (SFLP), a Machine Learning Core (MLC), Finite State Machine (FSM), adaptive self-configuration, and Qvar sensing, enabling advanced motion classification, gesture detection, orientation tracking, power management, and AI-assisted sensor processing. Its high-performance motion-tracking mode can operate at approximately 0.6 mA, supporting always-on low-power applications. The LSM6DSV16BXTR uses a compact 14-pin LGA package measuring 2.5 × 3.0 × 0.74 mm, supports −40°C to +85°C operation, and is an active, volume-production device. #STMicroelectronics #LSM6DSV16BXTR #LSM6DSV16BX #IMU #Accelerometer #Gyroscope #MotionSensor #SensorFusion #MachineLearningCore #MLC #IoT #Wearables #TWS #Robotics #EmbeddedSystems
2 Uses0 StarsBQ79616-Q1
16-S automotive precision battery monitor, balancer and integrated protector with ASIL-D compliance Battery monitor, balancer, and hardware protector designed to measure and monitor 6S to 16S battery modules in automotive battery management systems. The BQ79616-Q1 provides ±1.5 mV ADC accuracy, measures all cell channels within 128 µs, supports internal cell balancing up to 240 mA, and provides isolated differential daisy-chain communication with UART/SPI host interface support. It is housed in a 64-pin HTQFP package measuring 10 mm × 10 mm. #TexasInstruments #BQ79616Q1 #BatteryMonitor #BMS #BatteryManagement
0 Uses0 StarsM50-3500542
Connector Header Through Hole 10 position 0.050" pin header 2x5 1.27mm The Harwin M50-3500542 is a 1.27 mm pitch (0.05") 2×5 male pin header from the Harwin Archer M50 series, designed for board-to-board or cable-to-board interconnections. It is a through-hole, vertical PCB connector commonly used in embedded systems, debug interfaces (SWD/JTAG), and compact electronics where high-density signal routing is required. This connector provides a reliable low-profile interconnect solution with gold-plated contacts for good signal integrity and durability in industrial environments. Key Features Connector Type 2×5 (10-position) male pin header Dual-row configuration Pitch 1.27 mm (0.05") fine pitch for high-density PCB layouts Mounting Type Through-hole vertical PCB mount Contact Type Male square pins (0.4 mm typical) Electrical Rating Up to 1A per contact Contact Plating Gold plated mating area Tin plated tail for soldering Operating Temperature -40 °C to +105 °C Housing Material High-temperature thermoplastic (UL94 V-0 rated) Stacking / Mating Heights Multiple height options (approx. 3.2 mm to 6.2 mm) for flexible board stacking Compact Design Designed for high-density embedded PCB layouts Typical Applications ARM Cortex SWD / JTAG debug headers Embedded development boards Board-to-board mezzanine connections Industrial control electronics Compact IoT and MCU systems #CommonPartsLibrary #Connector #Header
1.6k Uses0 StarsDRV8311PRRWR
Multiphase Motor Driver NMOS PWM, SPI 24-WQFN (3x3) Three-phase PWM motor driver designed to drive three-phase brushless DC motors using three integrated MOSFET half-bridges. The DRV8311P operates from 3–20 V, supports up to 5-A peak output current and 200-kHz PWM frequency, and provides a 10-MHz SPI/tSPI interface, integrated current sensing, and a 3.3-V, 100-mA LDO regulator in a 24-pin 3 × 3-mm WQFN package. #MotorDriver #BLDC #PWM #SPI #TexasInstruments
0 Uses0 StarsFM25V20A-G
FRAM (Ferroelectric RAM) Memory IC 2Mbit SPI 40 MHz 8-SOIC 2-Mbit Serial F-RAM (Ferroelectric RAM) provides nonvolatile data storage organized as 256K × 8 bits and accessed through a high-speed SPI interface supporting up to 40 MHz and SPI modes 0 and 3. It operates from 2.0 V to 3.6 V over an industrial temperature range of −40°C to +85°C and is available in 8-pin SOIC and DFN packages. #F-RAM #SPI #NonvolatileMemory #Infineon
19 Uses0 StarsTSW-105-07-G-S
Connector Header Through Hole 5 position 0.100" (2.54mm) SWD header 1x5 2.54mm PinHeader 1x05 2.54mm horizontal The TSW-105-07-G-S is a high-reliability, through-hole, single-row pin header from Samtec’s TSW series. It is designed for board-to-board or wire-to-board interconnections in a wide range of electronic applications. Featuring a standard 2.54 mm pitch and gold-plated contacts, this connector ensures reliable electrical performance, durability, and compatibility with industry-standard mating components. Mechanical Characteristics Connector Type: Pin Header Mounting Type: Through-Hole Number of Positions: 5 Number of Rows: Single Row Pitch: 2.54 mm Orientation: Vertical Termination Style: Solder Contact Shape: Square Post Material and Plating Contact Material: Phosphor Bronze Contact Plating: Gold over Nickel Housing Material: Black Thermoplastic (UL94 V-0 rated) Electrical Characteristics Current Rating: Typically up to 3 A per contact Voltage Rating: Typically up to 500 VAC Contact Resistance: Low contact resistance for reliable signal transmission Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -55°C to +125°C Flammability Rating: UL94 V-0 Applications Board-to-board connections Wire-to-board interfaces Prototyping and development systems Industrial and consumer electronics Compliance and Standards RoHS Compliant Lead-Free #CommonPartsLibrary #Connector #Header #TSW
584 Uses0 StarsMAX17048X+T10
Battery Battery Monitor IC Lithium Ion 8-WLP (1.66x0.92) Battery fuel gauge IC that provides ModelGauge™ state-of-charge estimation for single-cell lithium-ion batteries without requiring a current-sense resistor. It operates over a 2.5 V to 4.5 V supply range, communicates through an I²C interface, measures battery voltage, and reports state of charge and voltage while consuming a typical operating current of 23 µA and a 0.3 µA shutdown current. #BatteryFuelGauge #FuelGaugeIC #BatteryManagement #SingleCellLiIon #ModelGauge #I2C #AnalogDevices #MaximIntegrated #PowerManagement #VoltageMonitoring
17 Uses0 Stars
