Capacitors

CAP SAFETY 2.2nF ±20% 400V 250V TH The DCF222M34Y5UQ6BL7A0 is a multilayer ceramic capacitor manufactured for general-purpose electronic filtering, bypassing, and decoupling applications. This surface-mount passive component is designed to provide stable capacitance performance in compact electronic assemblies while supporting high-density PCB layouts and automated manufacturing processes. The capacitor utilizes ceramic dielectric technology to achieve low impedance and reliable high-frequency performance. It is commonly used in power supply filtering, signal coupling, noise suppression, RF circuits, embedded systems, industrial electronics, and consumer devices. Its compact footprint and stable electrical behavior make it suitable for modern digital and analog circuit designs requiring efficient decoupling and transient response characteristics. Engineering Specification Device Type Multilayer ceramic capacitor Capacitor Technology Ceramic dielectric multilayer structure Mounting Style Surface mount technology Electrical Characteristics Stable capacitance performance for filtering and bypass applications Dielectric Characteristics Designed for general-purpose signal and power conditioning applications Frequency Performance Low impedance behavior suitable for high-frequency operation Thermal Characteristics Stable operation across standard electronic operating temperatures Mechanical Characteristics Compact SMT package optimized for automated PCB assembly Reliability Features High insulation resistance and long operational lifetime Construction Monolithic multilayer ceramic structure Applications Power supply decoupling Signal filtering Noise suppression RF circuitry Embedded systems Industrial electronics Consumer devices Communication equipment Analog and digital circuit stabilization Manufacturer Commonly associated with Murata-style MLCC component series #commonpartslibrary #ceramiccapacitor #mlcc #passivecomponents #surfaceountcomponents #powerelectronics #signalfiltering #decouplingcapacitor #electronicsdesign #embeddedhardware #analogdesign #digitalelectronics #rfdesign #industrialelectronics

Buck Switching Regulator IC Positive Adjustable 0.768V 1 Output 2A SOT-23-6 Thin, TSOT-23-6 TPS562201DDCT is a synchronous step-down DC-DC buck converter from Texas Instruments designed for compact and high-efficiency power management applications. The device integrates high-side and low-side MOSFETs to provide efficient voltage conversion with reduced external component requirements, making it suitable for embedded systems, consumer electronics, industrial control modules, and battery-powered devices. This regulator supports wide input voltage operation and delivers stable output regulation with fast transient response and low standby current. Its fixed-frequency switching architecture helps simplify EMI filtering and power supply design while maintaining high conversion efficiency across varying load conditions. The integrated protection features include thermal shutdown, overcurrent protection, undervoltage lockout, and soft-start functionality to enhance overall system reliability. The TPS562201DDCT is packaged in a compact surface-mount form factor optimized for space-constrained PCB layouts and supports the use of ceramic capacitors for low-noise and stable operation. It is widely used in distributed power systems, IoT hardware, communication equipment, and portable embedded electronics requiring reliable low-voltage power rails. #commonpartslibrary #powermanagement #buckconverter #dcdcconverter #texasinstruments #powersupply #embeddedhardware #lowpowerdesign #industrialelectronics #portableelectronics

Buck Switching Regulator IC Positive Fixed 5V 1 Output 3A 16-VFQFN Exposed Pad TPS62133RGTT is a synchronous step-down DC-DC buck converter from Texas Instruments designed for high-efficiency power regulation in compact embedded and battery-powered applications. It integrates high-side and low-side MOSFETs and operates with a fixed switching frequency optimized for low EMI and minimal external component count. The device supports wide input voltage operation and delivers stable regulated output voltage with excellent transient response and high conversion efficiency across varying load conditions. This regulator is commonly used in portable electronics, industrial controllers, wireless communication modules, sensor systems, and low-power embedded designs where compact PCB footprint and efficient power conversion are critical. The integrated soft-start, thermal shutdown, overcurrent protection, and power-good monitoring features improve system reliability and simplify power supply implementation. The TPS62133RGTT is housed in a compact QFN package suitable for space-constrained designs and supports operation with ceramic input and output capacitors for improved stability and reduced BOM size. #commonpartslibrary #powermanagement #buckconverter #dcdcconverter #texasinstruments #powersupply #embeddedhardware #lowpowerdesign #industrialelectronics #portableelectronics

Linear Voltage Regulator IC Positive Fixed 1 Output 300mA SOT-23-5 The TPS7A20 is an ultra-small, low-dropout (LDO) linear regulator that can source 300mA of output current. The TPS7A20 is designed to provide low noise, high PSRR, and excellent load and line transient performance that can meet the requirements of RF and other sensitive analog circuits. Using innovative design techniques, the TPS7A20 offers an ultra-low noise performance without the addition of a noise bypass capacitor. The TPS7A20 also provides the advantage of low quiescent current, which can be ideal for battery-powered applications. With an input voltage range of 1.6V to 6.0V and an output range of 0.8V to 5.5V, the TPS7A20 can be used for a wide variety of applications. The device uses a precision reference circuit to provide a maximum accuracy of 1.5% over load, line, and temperature variations. The TPS7A20 features an internal soft-start to lower the inrush current, thus minimizing the input voltage drop during start up. The device is stable with small ceramic capacitors, allowing for a small overall solution size. The TPS7A20 has a smart enable input circuit with an internally controlled pulldown resistor that keeps the LDO disabled even when the EN pin is left floating and helps eliminate the external components used to pulldown the EN pin • Low output voltage noise: 7μVRMS – No noise-bypass capacitor required • High PSRR: 95dB at 1kHz • Very low IQ: 6.5μA • Input voltage range: 1.6V to 6.0V • Output voltage range: 0.8V to 5.5V • Output voltage tolerance: ±1.5% (max) • Very low dropout: – 140mV (max) at 300mA (VOUT = 3.3V) – 145mV (max) at 300mA (VOUT = 3.3V, DBV) • Low inrush current • Smart enable pulldown • Stable with 1µF minimum ceramic output capacitor • Packages: – 1mm × 1mm X2SON (DQN) – 0.616mm × 0.616mm DSBGA (YCK) – 0.612mm × 0.612mm DSBGA (YCJ) – 2.9mm × 2.8mm SOT23-5 (DBV) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO

The X2-104K-275VAC is an X2-class safety film capacitor commonly used for EMI/RFI suppression across AC mains lines in power supplies, appliances, chargers, and industrial equipment. It is designed to safely operate directly across line-to-neutral AC connections and withstand voltage surges and transients on the mains. Key Features Capacitance: 100nF (0.1µF / 104 code) Rated Voltage: 275VAC Safety Class: X2 suppression capacitor Tolerance: ±10% (“K” tolerance code) Operating Temperature: -40°C to +110°C Through-hole radial package Self-healing polypropylene film construction High surge and impulse voltage capability Flame-retardant and safety-certified design Suitable for EMI noise suppression across AC mains Typical Applications AC line filtering SMPS input filtering Appliance EMI suppression Motor noise suppression Snubber and interference suppression circuits Across-the-line mains applications Part Marking Breakdown X2 → Safety capacitor class for across-the-line AC applications 104 → 100nF capacitance code K → ±10% tolerance 275VAC → Rated continuous AC voltage

IC SURGE STOPPER 2.7V~18V WSON-8-EP(2x2) The TPS2595xx family of eFuses (integrated FET hot swap devices) is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges, and excessive inrush current. Output current limit level can be set with a single external resistor. It is also possible to get an accurate sense of the output load current by measuring the voltage drop across the current limit resistor. Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Overvoltage events are quickly limited by internal clamping circuits to a safe fixed maximum, with no external components required. The TPS259573 variant provides an option to set a user-defined overvoltage cutoff threshold. Quick output discharge function can be implemented in the TPS2595x5 variants by connecting the OUT pin to the QOD pin. The devices are characterized for operation over the temperature range of –40°C to +125°C. 1• Wide Input Voltage Range: 2.7 V to 18 V – 20 V Absolute Maximum – 3 V to 18 V for TPS2595x5 Version • Low On-Resistance: RON = 34 mΩ (Typical) • Fast Overvoltage Protection Clamp (3.8-V, 5.7-V, and 13.7-V options) With a Response Time of 5 µs (Typical) • TPS2595x0, TPS2595x1, TPS2595x5: Active High Enable Input With Adjustable Undervoltage Lockout (UVLO) • TPS2595x3: Active Low Enable Input With Adjustable Overvoltage Lockout (OVLO) • Adjustable Current Limit With Load Current Monitor Output (ILM) – Current Range: 0.5 A to 4 A – Current Limit Accuracy: ±7.5% • Adjustable Output Slew Rate Control (dVdt) • Over Temperature Protection (OTP) • Fault Indication Pin (FLT ) • UL 2367 Recognition – File No. E169910 – RILM >= 487 Ω (4.42 A maximum) • IEC 62368-1 Certified • Safe During Single Point Failure Test (IEC 62368- 1) – ILM Pin Open/Short Detection #CommonPartsLibrary #IntegratedCircuit #PowerManagement

IC SURGE STOPPER 2.7V~23V VQFN-10-HR(2x2) The TPS25947xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the devices an excellent choice for power MUX/ORing applications as well as systems which need load side energy hold up storage in case input power supply fails. The devices use linear ORing based scheme to establish an almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation. Output slew rate and inrush current can be adjusted using an external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor. The devices are available in a 2mm × 2mm, 10- pin HotRod™ QFN package for improved thermal performance and reduced system footprint. The devices are characterized for operation over a junction temperature range from –40°C to +125°C. • Wide operating input voltage range: 2.7V to 23V – 28V absolute maximum – Withstands negative voltages up to –15V • Integrated back-to-back FETs with low onresistance: RON = 28.3mΩ (typical) • Ideal diode operation with true reverse-current blocking • Fast overvoltage protection – Overvoltage clamp (OVC) with pin-selectable threshold (3.8V, 5.7V, 13.8V) and 5μs (typical) response time OR – Adjustable overvoltage lockout (OVLO) with 1.2μs (typical) response time • Overcurrent protection with load current monitor output (ILM) – Active current limit OR circuit-breaker options – Adjustable threshold (ILIM) 0.5A to 6A • ±10% accuracy for ILIM > 1A – Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM – Output load current monitor accuracy: ±6% (IOUT ≥ 1A) • Fast-trip response for short-circuit protection – 500ns (typical) response time – Adjustable (2 × ILIM) and fixed thresholds • Active high enable input with adjustable undervoltage lockout threshold (UVLO) • Adjustable output slew rate control (dVdt) • Overtemperature protection • Digital outputs – Priority power MUX control (AUXOFF) and fault indication (FLT) or – Power Good indication (PG) with adjustable threshold (PGTH) • UL 2367 recognition – File No. E339631 – RILM ≥ 750Ω • IEC 62368-1 CB certified • Small footprint: QFN 2mm × 2mm, 0.45mm pitch #CommonPartsLibrary #IntegratedCircuit #PowerManagement

200mA, high PSRR, low IQ, low dropout voltage regulator with enable function The Texas Instruments TLV700 is a series of 200-mA low-dropout (LDO) linear voltage regulators designed for portable and battery-powered devices. It features very low quiescent current (IQ), low dropout voltage, and high power-supply rejection ratio (PSRR), making it suitable for applications requiring efficient and stable voltage regulation with minimal power loss. The device is optimized for handheld electronics, wireless modules, IoT systems, and other low-power embedded applications. Key Features 200-mA output current capability Very low dropout voltage: 43 mV at 50 mA load 85 mV at 100 mA load 175 mV at 200 mA load Low quiescent current: typically 31 µA High PSRR: 68 dB at 1 kHz Output voltage accuracy of ±2% Fixed output voltage options from 1.2 V to 4.8 V Stable with small 0.1-µF output capacitors Integrated thermal shutdown and overcurrent protection Available in compact SON-6, SOT-23-5, and SC-70 packages Suitable for battery-operated and portable electronics Typical Applications Smartphones and handheld devices Bluetooth and ZigBee modules IoT and wearable devices WLAN modules and add-on cards Battery-powered embedded systems Portable consumer electronics #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO

The DW01A is a compact single-cell lithium-ion/lithium-polymer battery protection IC designed to safeguard rechargeable batteries from unsafe operating conditions such as overcharge, overdischarge, overcurrent, and short circuits. It is widely used in battery packs, power banks, TP4056 charging modules, portable electronics, and IoT devices because of its low power consumption and minimal external component requirements. Key Features Single-cell Li-ion/Li-Po battery protection Overcharge protection (typically 4.3V) Overdischarge protection (typically 2.4V) Overcurrent and short-circuit protection Ultra-low quiescent current (~3µA typical) Very low standby/discharge current Drives external dual MOSFETs for charge/discharge control Internal delay timers for noise immunity No external timing capacitors required Compact SOT-23-6 package Wide operating voltage range Automatic recovery after fault removal Typical Applications 18650 battery protection boards Power banks Bluetooth devices Wearables Portable consumer electronics DIY battery-powered projects TP4056 charging modules with protection circuitry #CommonPartsLibrary #IntegratedCircuit #PowerManagement