Microcontrollers

The CD74HC4067M is a high-speed CMOS analog multiplexer and demultiplexer designed to route one of multiple analog or digital signals to a common input/output line. Built using advanced high-speed CMOS technology, this device provides low ON-state resistance, wide signal bandwidth, and low power consumption, making it suitable for signal routing, data acquisition systems, sensor expansion, communication interfaces, industrial control systems, and embedded electronics. The integrated channel selection logic enables efficient switching between multiple signal paths while maintaining signal integrity and minimizing distortion. Features High-speed CMOS analog multiplexer and demultiplexer architecture Multiple single-ended channels connected to a common input/output Low ON-state resistance for reduced signal loss Wide analog signal handling capability Bidirectional signal switching support Compatible with both analog and digital signals Low power consumption during operation Break-before-make switching characteristic High noise immunity Wide operating supply voltage range Direct interface compatibility with microcontrollers and digital logic devices Low crosstalk and low leakage current performance Surface-mount package optimized for automated assembly Applications Sensor multiplexing systems Data acquisition equipment Industrial automation controllers Embedded electronics Test and measurement instruments Communication systems Audio signal routing Battery monitoring systems Medical instrumentation Consumer electronic products Microcontroller input expansion Analog signal selection networks Electrical Characteristics CMOS logic implementation Analog and digital signal switching capability Low propagation delay Low channel capacitance Low leakage current High switching speed Wide bandwidth operation ESD protection features High input impedance Low standby power consumption Mechanical Characteristics Surface-mount integrated circuit package Compact footprint for high-density PCB layouts RoHS-compliant construction Suitable for automated pick-and-place assembly Standard industry package dimensions Design Considerations Use proper decoupling capacitors near supply pins Keep analog signal traces short to minimize noise pickup Ensure signals remain within specified supply voltage limits Consider ON-resistance effects in precision analog applications Implement appropriate PCB grounding techniques for optimal performance Avoid exceeding maximum switching current ratings #commonpartslibrary #integratedcircuit #analog #digital #multiplexer #demultiplexer #signalrouting #analogswitch #dataacquisition #embeddedsystems #industrialelectronics #texasinstruments

The ESP32-C3FH4 is a highly integrated wireless microcontroller designed for Internet of Things, smart devices, industrial automation, consumer electronics, and embedded connectivity applications. It combines a low-power RISC-V processor with integrated Wi-Fi and Bluetooth Low Energy connectivity, providing a cost-effective and secure platform for wireless communication and edge computing. The device incorporates embedded flash memory, advanced security features, low-power operating modes, and a rich set of peripheral interfaces, making it suitable for battery-powered and always-connected systems. Its compact design and comprehensive software ecosystem enable rapid development of connected products while maintaining high reliability and energy efficiency. The ESP32-C3FH4 is widely used in smart sensors, home automation devices, wearable electronics, industrial monitoring systems, wireless control modules, and cloud-connected embedded products. Features Integrated RISC-V microcontroller core Built-in Wi-Fi connectivity Integrated Bluetooth Low Energy support Embedded flash memory Low-power operation for battery-powered applications Hardware cryptographic acceleration Secure boot capability Flash encryption support Multiple GPIO interfaces Integrated UART, SPI, I²C, I²S, PWM, and ADC peripherals Real-time processing capability Wireless networking and cloud connectivity support OTA firmware update support Compact surface-mount package Industrial-grade reliability Electrical Characteristics Wireless microcontroller architecture Integrated RF subsystem Low-power operating modes High-performance embedded processing Secure communication support Multi-protocol wireless connectivity Flexible peripheral expansion capability Optimized power consumption for IoT devices Applications Internet of Things devices Smart home automation Wireless sensor networks Industrial monitoring systems Asset tracking devices Wearable electronics Smart appliances Remote control systems Data acquisition platforms Edge computing applications Connected consumer products Embedded wireless gateways Package Information Surface-mount package Compact footprint for embedded applications Suitable for automated assembly processes Optimized thermal and electrical performance PCB-friendly package design #commonpartslibrary #integratedcircuit #microcontroller #wirelessconnectivity #wifi #bluetoothlowenergy #iot #embeddedsystems #espressif #smartdevices #industrialautomation #edgecomputing #wirelessmodule #internetofthings #electronicsdesign #riscv #embeddedelectronics #lowpowerdesign

Female Header 38 Position 2.54mm Pitch Dual Row Through Hole -40℃~+105℃ X6521FV-2x19-C85D32 is a 2.54 mm pitch, dual-row female header connector manufactured by XKB Connection. It is designed for through-hole PCB mounting and provides a reliable board-to-board or wire-to-board interconnection solution in industrial, consumer, and embedded electronic applications. The connector features 38 positions (2×19) arranged in two rows and supports moderate power and signal transmission requirements. Key Features Connector Type: Female Header / Receptacle Number of Positions: 38 contacts (2×19 configuration) Pitch: 2.54 mm (0.1 inch) Row Spacing: 2.54 mm Mounting Type: Through-Hole (THT) Orientation: Top-entry Rated Current: 3 A per contact Rated Voltage: 250 V Contact Material: Brass Contact Plating: Gold-plated contacts for improved conductivity and corrosion resistance Insulator Height: 8.5 mm Operating Temperature Range: -40°C to +105°C Hole Type: Square socket contacts RoHS Compliant Typical Applications Microcontroller and development boards Industrial control systems Embedded electronics Board-to-board interconnections Prototyping and evaluation hardware Signal and low-power distribution connections #CommonPartsLibrary #Connector

USB-to-UART Bridge CP2102N-A02-GQFN24 is a highly integrated USB-to-UART bridge controller from Silicon Labs. It provides a simple and cost-effective way to add USB connectivity to embedded systems by converting USB 2.0 Full-Speed communication into a standard UART interface. The device integrates the USB transceiver, oscillator, voltage regulator, and UART controller, minimizing external components and eliminating the need for USB firmware development. It is commonly used in microcontroller programming interfaces, industrial equipment, POS terminals, data loggers, and USB-to-serial adapters. Key Features USB 2.0 Full-Speed compliant (12 Mbps) interface. USB-to-UART bridge with data rates up to 3 Mbaud. Integrated USB transceiver; no external USB resistors required. Integrated oscillator; no external crystal required. On-chip 3.3 V voltage regulator. USB Battery Charger Detection (BC 1.2) support. Remote wakeup capability from USB suspend state. Low operating current of approximately 9.5 mA. Hardware and software flow control support. Internal configurable ROM for Vendor ID, Product ID, serial number, and USB descriptors. Royalty-free Virtual COM Port (VCP) drivers available for major operating systems. Operating temperature range: −40°C to +85°C. Compact 24-pin QFN (4 mm × 4 mm) package. Typical Applications USB-to-Serial adapters Microcontroller programming and debugging interfaces Industrial automation equipment Point-of-sale (POS) terminals Medical instruments Data acquisition and logging systems Embedded systems requiring USB connectivity #commonpartslibrary #integratedcircuit

The NX3225GD 8.000MHz STD-CRA-3 is a surface-mount quartz crystal resonator designed to provide a stable and accurate clock reference for electronic circuits. It is housed in a compact ceramic package suitable for space-constrained applications and is optimized for low power consumption and reliable frequency generation. This crystal is commonly used in microcontrollers, wireless communication modules, industrial control systems, consumer electronics, IoT devices, and embedded systems requiring precise timing and frequency control. Features Fundamental mode quartz crystal resonator Nominal frequency of 8.000 MHz Compact surface-mount ceramic package High frequency stability and accuracy Low equivalent series resistance Suitable for low-power oscillator circuits Excellent aging characteristics RoHS-compliant construction Designed for automated SMT assembly processes Reliable operation across industrial temperature environments Electrical Characteristics Crystal type: Quartz Crystal Resonator Frequency: 8.000 MHz Oscillation mode: Fundamental Load capacitance: Standard load capacitance configuration Frequency tolerance: Standard precision grade Frequency stability: Industrial-grade stability performance Equivalent series resistance optimized for MCU and RF oscillator circuits Low drive level operation High insulation resistance Mechanical Characteristics Surface-mount package Ceramic hermetic enclosure Compact footprint suitable for high-density PCB layouts Compatible with standard reflow soldering processes Designed for automated pick-and-place assembly Applications Microcontroller clock generation Wireless communication devices Bluetooth and RF modules IoT and smart devices Industrial automation equipment Embedded control systems Consumer electronics Timing and synchronization circuits Sensor interface modules Portable battery-powered products Compliance RoHS compliant Lead-free package Environmentally friendly manufacturing standards Suitable for commercial and industrial electronic applications #commonpartslibrary #crystal #quartzcrystal #frequencycontrol #timingdevice #clocksource #oscillator #smtcomponent #embeddedsystems #wirelesscommunication #industrialelectronics #consumerelectronics #iotdevices #passivecomponents #electroniccomponents

The TPS3839G33DBZT is an ultra-low-power voltage supervisor designed to monitor system supply rails and provide reliable reset signaling for microcontrollers, processors, FPGAs, and other digital systems. The device continuously supervises the supply voltage and asserts a reset output when the monitored voltage falls below the factory-programmed threshold, ensuring proper system startup, shutdown, and fault recovery. Its low quiescent current makes it particularly suitable for battery-powered, portable, and energy-efficient applications where power consumption is critical. The device features a precision voltage monitoring architecture with a fixed reset threshold optimized for nominal logic supply rails. It provides a stable reset output with an internally defined reset timeout period, eliminating the need for external timing components. The compact package and robust noise immunity make it ideal for embedded systems, industrial controls, consumer electronics, IoT devices, medical equipment, and wireless communication platforms. Key Features Ultra-low quiescent current operation Precision fixed-voltage supervision Factory-programmed reset threshold for logic supply monitoring Active-low reset output Internal reset timeout delay High threshold accuracy over temperature Fast response to undervoltage conditions Push-pull reset output configuration No external components required for operation Compact surface-mount package Wide operating temperature range High reliability and low power consumption Applications Microcontroller reset generation Embedded control systems Battery-powered electronics Industrial automation equipment IoT and wireless sensor nodes Portable medical devices Consumer electronics Data acquisition systems Power management subsystems Communication and networking equipment Electrical Characteristics Fixed supply voltage monitoring Precision undervoltage detection Low operating current Integrated reset timing circuitry Stable reset assertion during power-up and brownout conditions Noise-tolerant voltage supervision Reliable operation across specified temperature range Package Information Surface-mount package Compact footprint for space-constrained designs RoHS-compliant construction Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powersupervisor #voltagesupervisor #resetcontroller #powermanagement #embeddedsystems #microcontroller #lowpower #batterypowered #industrialelectronics #iot #electronicsdesign #semiconductor #texasinstruments

Pin Header 2 2.54mm 6mm 16P -55℃~+105℃ 3mm 2.54mm 3A 2.54mm 2x8P Through Hole,P=2.54mm Headers, Male Pins RoHS The 2.54-2×8P pin header is a dual-row connector with 16 pins arranged in a 2×8 configuration and a standard 2.54 mm (0.1 inch) pitch. It is commonly used in PCB interconnections, development boards, modules, and general-purpose electronic circuits for signal routing and board-to-board or wire-to-board connections. Key Features Standard pitch: 2.54 mm (0.1 inch), widely compatible with breadboards and jumper wires Pin configuration: 2 rows × 8 pins (total 16 pins) Mounting type: Typically through-hole for strong mechanical stability Easy connectivity: Supports jumper wires, female sockets, and IDC connectors Versatile use: Common in development boards, microcontroller systems, and expansion interfaces Cost-effective: Simple and widely available connector solution Durable contact: Designed for repeated plugging and unplugging in prototyping environments #CommonPartsLibrary #Connector

Three-Terminal Fixed Positive Voltage Regulator The LM7812T is a three-terminal fixed positive linear voltage regulator IC designed to provide a stable +12V DC output from a higher input voltage source. It belongs to the widely used 78xx series regulators, where “12” indicates the fixed output voltage of 12 volts. It is commonly used in power supply circuits, embedded systems, and electronic devices that require a simple, reliable regulated 12V rail without the complexity of external components. The device operates as a linear regulator, meaning it reduces voltage by dissipating excess energy as heat, so proper heatsinking is often required for higher current loads. Key Features of LM7812T Fixed +12V output voltage Output current up to 1A–1.5A (depending on package and cooling) Input voltage range up to ~35V max Built-in thermal shutdown protection Internal current limiting and short-circuit protection Safe-area compensation for reliable operation No external components required for basic operation Good line and load regulation Low quiescent current (~8 mA typical) Available in TO-220 / TO-3 packages (LM7812T variants) Typical Applications DC power supplies (12V regulated rail) Arduino and microcontroller systems Industrial control electronics Sensor and communication circuits Battery-powered systems requiring stable 12V Audio amplifiers and small motor control circuits #CommonPartsLibrary #IntegratedCircuit #PowerManagement