Sensors

1/1 Transceiver Half CANbus 8-SOIC SN65HVD230D is a high-speed Controller Area Network transceiver from Texas Instruments designed for robust communication in automotive, industrial, and embedded networking applications. The device implements the physical layer interface for CAN protocol systems and provides reliable differential signal transmission with low electromagnetic emissions and strong noise immunity. This transceiver supports interoperability with standard CAN controllers and is optimized for low-power operation in distributed control systems, sensor networks, industrial automation, robotics, and automotive electronics. It features slope control functionality for reduced EMI, thermal shutdown protection, undervoltage lockout, and fail-safe receiver behavior to enhance communication reliability in electrically noisy environments. The SN65HVD230D operates with low standby current and supports high-speed CAN data communication while maintaining stable bus performance across varying operating conditions. Its compact surface-mount package makes it suitable for space-constrained embedded hardware and multi-node communication systems requiring dependable CAN bus connectivity. #commonpartslibrary #canbus #transceiver #texasinstruments #embeddedhardware #industrialcommunication #automotiveelectronics #wirelesssystems #powermanagement #electronicscomponents

Humidity, Temperature 0 ~ 100% RH I2C ±2% RH 8 s Surface Mount The SHTC3-TR-10KS is an ultra-low-power digital humidity and temperature sensor from Sensirion designed for space-constrained and battery-powered applications such as wearables, mobile devices, IoT sensors, smart home products, and environmental monitoring systems. It integrates calibrated humidity and temperature sensing elements with a digital I²C interface in a compact 2 mm × 2 mm DFN package. Key Features Measures both relative humidity and temperature Humidity accuracy of up to ±2% RH Wide humidity measurement range: 0% to 100% RH Integrated digital I²C interface Ultra-low power consumption optimized for battery-operated devices Supply voltage range: 1.62 V to 3.6 V Compact 4-pin DFN (2 × 2 mm) surface-mount package Fully calibrated and temperature compensated Fast response time suitable for real-time environmental sensing Operating temperature range: −40°C to +125°C Supports sleep and low-power operating modes for portable electronics Typical Applications Wearable devices Smartphones and tablets HVAC and smart thermostats IoT environmental monitoring Home automation systems Portable weather stations Consumer electronics #CommonPartsLibrary #Sensor

IC RF TxRx + MCU Bluetooth Bluetooth v5.0 2.4GHz 32-VFQFN Exposed Pad nRF52810-QCAA-R is a multiprotocol ultra-low-power wireless System-on-Chip from Nordic Semiconductor designed for Bluetooth Low Energy and proprietary wireless communication applications. The device integrates a high-performance ARM Cortex-M processor, radio transceiver, memory resources, and peripheral interfaces into a compact package optimized for low-power embedded systems and IoT devices. This SoC supports reliable wireless connectivity with low energy consumption, making it suitable for wearable electronics, wireless sensors, smart home devices, industrial monitoring systems, and battery-powered portable applications. The integrated radio architecture provides stable RF performance with support for advanced wireless features, secure communication, and efficient coexistence in crowded RF environments. The nRF52810-QCAA-R includes multiple GPIOs, serial communication peripherals, timers, PWM functionality, analog interfaces, and low-power operating modes that simplify embedded hardware design and firmware development. Its compact package and optimized power profile make it ideal for space-constrained and energy-sensitive wireless applications. #commonpartslibrary #nordicsemiconductor #bluetoothlowenergy #wirelesssoc #iotdevices #embeddedhardware #rfdesign #lowpowerdesign #wearableelectronics #wirelesscommunication

10 µF ±10% 25V Ceramic Capacitor X7R 0805 (2012 Metric) CL21B106KAYQNNE is a multilayer ceramic capacitor from Samsung Electro-Mechanics designed for general-purpose decoupling, filtering, and energy storage applications in compact electronic systems. Built using advanced ceramic dielectric technology, this surface-mount capacitor provides stable capacitance characteristics, low equivalent series resistance, and reliable high-frequency performance suitable for modern digital and analog circuits. The component is commonly used in power supply filtering, noise suppression, signal coupling, and bypass applications across embedded systems, consumer electronics, communication devices, industrial controllers, and portable hardware platforms. Its compact package enables efficient use of PCB space while supporting automated high-density surface-mount assembly processes. This capacitor is optimized for stable operation under varying temperature and voltage conditions and is widely integrated into microcontroller power rails, RF circuits, sensor modules, and power management systems requiring dependable passive component performance. #commonpartslibrary #capacitor #mlcc #ceramiccapacitor #passivecomponents #powermanagement #embeddedhardware #electronicscomponents #surfacemountdevice #samsungelectromechanics

Buck Switching Regulator IC Positive Fixed 5V 1 Output 3A 16-VFQFN Exposed Pad TPS62133RGTT is a synchronous step-down DC-DC buck converter from Texas Instruments designed for high-efficiency power regulation in compact embedded and battery-powered applications. It integrates high-side and low-side MOSFETs and operates with a fixed switching frequency optimized for low EMI and minimal external component count. The device supports wide input voltage operation and delivers stable regulated output voltage with excellent transient response and high conversion efficiency across varying load conditions. This regulator is commonly used in portable electronics, industrial controllers, wireless communication modules, sensor systems, and low-power embedded designs where compact PCB footprint and efficient power conversion are critical. The integrated soft-start, thermal shutdown, overcurrent protection, and power-good monitoring features improve system reliability and simplify power supply implementation. The TPS62133RGTT is housed in a compact QFN package suitable for space-constrained designs and supports operation with ceramic input and output capacitors for improved stability and reduced BOM size. #commonpartslibrary #powermanagement #buckconverter #dcdcconverter #texasinstruments #powersupply #embeddedhardware #lowpowerdesign #industrialelectronics #portableelectronics

USB-A (USB TYPE-A) USB 2.0 Receptacle Connector 4 Position Through Hole, Right Angle The ADS1256IDBT is a high-precision, low-noise, 24-bit analog-to-digital converter manufactured by Texas Instruments. It is designed for high-resolution measurement applications requiring exceptional accuracy, low drift, and programmable data rates. The device integrates a low-noise programmable gain amplifier, a precision delta-sigma ADC core, and a flexible multiplexer that supports multiple differential or single-ended analog inputs. The converter is optimized for industrial process control, sensor measurement, weigh scales, data acquisition systems, temperature monitoring, and portable instrumentation. Its integrated digital filtering and selectable gain settings enable direct interfacing with low-level sensors such as strain gauges, thermocouples, RTDs, and bridge sensors without requiring extensive external signal conditioning. The ADS1256IDBT supports SPI-compatible serial communication and operates with low power consumption while maintaining excellent dynamic performance and high effective resolution. The device provides programmable output data rates suitable for both low-speed precision measurements and higher-speed acquisition systems. Device Features 24-bit delta-sigma analog-to-digital converter Low-noise programmable gain amplifier Eight single-ended or four differential analog input channels Programmable gain settings from 1 to 64 Programmable data output rates SPI-compatible serial interface Integrated digital filter for noise reduction Low offset drift and gain drift Internal oscillator support Sensor burnout detection capability Self-calibration and system calibration functions Low power operation Wide analog supply voltage range Excellent 50 Hz and 60 Hz rejection performance Electrical Characteristics Resolution of 24 bits Maximum data rate up to 30 kSPS Differential input architecture Input multiplexer for multi-channel acquisition Low RMS noise performance High common-mode rejection ratio High power-supply rejection ratio Programmable gain amplifier integrated on-chip Internal reference support with external reference capability Interface and Control SPI-compatible digital communication interface Configurable control registers Read and write register functionality Synchronization and standby control support Hardware reset capability Interrupt and data-ready signaling support Package Information Manufacturer package designation: DBT Package type: TSSOP Surface-mount device Fine-pitch lead configuration Industrial temperature grade device Applications Precision data acquisition systems Industrial automation and control Weigh scales and bridge sensors Temperature measurement systems Pressure sensing applications Portable instrumentation Medical instrumentation Laboratory measurement equipment Energy monitoring systems Process monitoring and control Manufacturer Information Manufacturer: Texas Instruments Manufacturer Part Number: ADS1256IDBT Product Category: Precision Analog-to-Digital Converter RoHS compliant device #commonpartslibrary #integratedcircuit #analog #adc #deltasigma #precisionadc #sensorinterface #dataacquisition #industrialautomation #instrumentation #signalconditioning #texasinstruments #spiinterface #mixedsignal #measurementsystems

Gas Sensors SGP30-2.5k DFN-6_L2.5-W2.5-P0.8-BL-EP LCSC Part Number: C514454 JLCPCB Part Class: Extended Part Manufactured by Sensirion(瑞士盛思锐)

Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH Surface Mount SHT4x is a digital sensor platform for measuring relative humidity and temperature at different accuracy classes. Its I2C interface provides several preconfigured I2C addresses while maintaining an ultra-low power budget (0.4 μW). The power-trimmed internal heater can be used at three heating levels thus enabling sensor operation in demanding environments. The four-pin dual-flat-no-leads package is suitable for surface mount technology (SMT) processing and comprises an optional on-package patented PTFE membrane or a removable protective cover. Sensor specific calibration certificates according to ISO17025, identifiable through unique serial numbers, are available. • Accuracies ΔRH = ±1.0 %RH, ΔT = ±0.1 °C • VDD = 1.08 V … 3.6 V • Avg. current: 0.4 µA, Idle current: 80 nA • I2C FM+, CRC checksum, multip. I2C addr. • Patented protection options1 , PTFE membrane and removable protective cover • Operating range: 0 … 100 %RH, −40…125 °C • Fully functional in a condensing environment • Power heater, true NIST-traceability • JEDEC JESD47 qualification • Sensor-specific calibration certificate acc. to ISO 17025: 2017, 3-point temp. calibration #CommonPartsLibrary #Sensor

A digital sensor platform that enables relative humidity and temperature measurements with market-leading performance. This sensor offers reduced power consumption and its exceptionally small size in a robust DFN housing enables it to be integrated into challenging designs while catering to the highest reliability demands. In particular, every SHT43 exhibits a best-in-class drift of <0.01 °C per year and comes with a unique ISO17025 three-point temperature calibration certificate, which enables cost-effective, high-volume manufacturing.

Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41-AD1B-R3 is a high-precision digital humidity and temperature sensor developed by Sensirion. It integrates calibrated sensing elements, analog signal processing, and a digital communication interface within a compact surface-mount package optimized for space-constrained embedded applications. The device is designed for accurate environmental monitoring across industrial, consumer, HVAC, portable electronics, and IoT systems. The sensor utilizes Sensirion CMOSens® technology to provide stable long-term performance, fast response time, and excellent repeatability under varying environmental conditions. Factory calibration enables direct digital output without the need for external calibration circuitry. The integrated I²C interface simplifies system integration with microcontrollers and embedded processors. The SHT41-AD1B-R3 is engineered for low-power operation, making it suitable for battery-powered and energy-efficient designs. Its compact DFN package supports automated assembly processes and high-density PCB layouts. The device also incorporates advanced internal diagnostics and checksum protection to improve communication reliability and data integrity. Features High-accuracy relative humidity sensing High-accuracy temperature measurement Fully calibrated and linearized digital output I²C digital communication interface Low power consumption optimized for portable systems Fast response and measurement conversion time Excellent long-term stability and repeatability Integrated heater functionality for condensation mitigation Wide operating voltage range Compact surface-mount DFN package Factory-trimmed and tested performance High immunity to environmental stress and contamination Low drift over product lifetime Suitable for reflow soldering processes Electrical Characteristics Supply voltage supports low-voltage embedded systems Digital communication compatible with standard I²C hosts Low standby current consumption Optimized active measurement current Integrated CRC data protection for communication integrity Environmental Characteristics Wide operating temperature range Wide relative humidity operating range Designed for high reliability in industrial and consumer environments Resistant to moisture-induced performance degradation Supports long operational lifetime with stable calibration Package Information Compact DFN surface-mount package Moisture-sensitive device suitable for automated assembly RoHS compliant and halogen-free construction Tape-and-reel packaging configuration for production assembly Applications Environmental monitoring systems HVAC and climate control equipment Smart home and IoT devices Portable electronics Industrial automation systems Data loggers and instrumentation Weather monitoring equipment Indoor air quality monitoring Battery-powered sensor nodes Consumer electronic products #commonpartslibrary #sensor #temperature #humidity #environmentalsensor #i2c #embedded #industrial #iot #sensirion