Sensors

JST PH Connector Header Through Hole 2-pin 0.079" (2.00mm) battery connector JST PH 2 pin The B2B-PH-K-S is a 2-position vertical header connector with a 2.0 mm pitch, designed for mating with JST PH series crimp housings (e.g., PHR-2). It is commonly used in consumer electronics, battery connections, and small embedded systems due to its compact size and secure locking mechanism. Key Features Series: JST PH Series Number of Pins: 2 Pitch: 2.0 mm Mounting Type: Through-hole (vertical) Contact Type: Male pin header Mating Type: Friction lock (secure connection) Current Rating: ~2 A (typical, depends on wire and conditions) Voltage Rating: ~100 V Contact Material: Copper alloy (tin-plated) Housing Material: UL94V-0 rated plastic (flame-retardant) Operating Temperature: Typically -25°C to +85°C Typical Applications Battery connectors (Li-ion/LiPo packs) Power supply connections in small devices Embedded systems (e.g., Arduino, sensors) Consumer electronics (fans, LEDs, small appliances) #CommonPartsLibrary #Connector #Header #JST-PH

Digital Differential Pressure Sensor – Ultra-low differential pressure sensor designed for HVAC systems, medical devices, respiratory equipment, airflow monitoring, filter monitoring, industrial automation, environmental sensing, and embedded measurement applications. The Sensirion SDP800-500Pa features a ±500 Pa differential pressure measurement range with ±3% reading accuracy, delivering highly accurate measurements of air and non-aggressive gases. It integrates a 16-bit digital output with an I²C interface, eliminating the need for external signal conditioning while providing temperature-compensated and factory-calibrated measurements. Operates from a 3.0 V to 5.5 V supply, includes dual 5.2 mm tube ports for easy pneumatic connections, and withstands a maximum pressure of 100 kPa (14.5 PSI). Housed in a compact board-mount module, it operates over a −20°C to +85°C temperature range, making it ideal for precision airflow and pressure monitoring in embedded and industrial systems. #Sensirion #SDP800500PA #SDP800 #DifferentialPressureSensor #AirflowSensor #I2C #HVAC #MedicalDevices #IndustrialAutomation #EnvironmentalMonitoring #EmbeddedSystems #PressureSensor

Automotive multiple power supply IC designed as a system basis chip for automotive electronics, integrating a switched-mode pre-regulator, three linear regulators, and a configurable 0.8 V to 5 V microcontroller core regulator with up to 1 A buck or 750 mA linear output. It operates from a 4.5 V to 19 V supply with boost (6 V to 19 V without boost), supports a 16-bit SPI interface, includes a 4-channel wheel speed sensor interface, 10-bit ADC, configurable watchdogs, high-side pre-drivers, and is housed in a 64-pin TQFP exposed-pad package. #AutomotiveIC #PowerManagementIC #SystemBasisChip #PMIC #SPI #WheelSpeedSensor #ADC #Watchdog #TQFP64 #STMicroelectronics

CONN HEADER SMD R/A 3POS 1.25mm The SM03B-GHS-TB(LF)(SN) is a 3-pin, surface-mount, right-angle header connector that mates with JST GH-series wire housings. It provides a reliable, low-profile connection between a PCB and external wires using a crimp-style mating system. It belongs to the JST GH series, known for fine-pitch, compact connectors optimized for miniaturized electronics. 3-position connector (signal/power lines) 1.25 mm pitch for high-density PCB layout Surface-mount, right-angle (horizontal) mounting Shrouded header design for secure mating and alignment Locking ramp mechanism to prevent accidental disconnection Tin-plated contacts for reliable conductivity Lead-free / RoHS compliant (LF/SN finish) Current rating: ~1 A typical Voltage rating: ~50 V Operating temperature: approx. -25 °C to +85 °C 📦 Typical Applications Consumer electronics (wearables, IoT devices) Industrial control modules Robotics and sensor interfaces Battery-powered embedded systems Compact PCB interconnect systems #CommonPartsLibrary #Connector

Temperature Sensor Analog, Local 0°C ~ 100°C 10mV/°C 8-SOIC The LM35DM/NOPB is a precision analog temperature sensor that provides an output voltage linearly proportional to Celsius (Centigrade) temperature at 10 mV/°C. It operates from a 4 V to 30 V supply, measures temperatures from −55°C to +150°C, draws typically less than 60 µA supply current, and is housed in an 8-pin SOIC (D) package. #TemperatureSensor #AnalogSensor #PrecisionSensor #TexasInstruments #LM35 #SOIC8

Capacitive Touch Sensor Controller for projected capacitive (PCAP) touch panels, supporting up to 40 touch channels with USB, I²C, and UART host interfaces. The ILI2511 operates from a 3.3 V supply, integrates touch sensing, signal processing, and host communication in a single chip, and is housed in an 88-pin QFN package for industrial, POS, and ATM touch applications. #ILITEK #ILI2511 #CapacitiveTouchController #TouchController #PCAP #USB #I2C #UART #QFN88 #HumanMachineInterface #EmbeddedSystems #PCBLibrary

Dual-Core Crossover MCU with Arm® Cortex®-M7 and Cortex®-M4 Cores – High-performance crossover microcontroller designed for industrial automation, edge AI, HMI, motor control, robotics, audio processing, IoT gateways, medical devices, and advanced embedded systems. The NXP MIMXRT1173CVM8A integrates an Arm® Cortex®-M7 core running up to 800 MHz and an Arm® Cortex®-M4 core running up to 400 MHz, delivering real-time performance without an external operating system. It features 2 MB on-chip SRAM with support for external program memory, making it suitable for graphics, audio, and complex control applications. The device includes 20-channel 12-bit SAR ADCs, 12-bit DAC, 10/100 Ethernet, USB 2.0 OTG, CAN FD, SD/MMC, I²C, SPI, UART/USART, SAI, SPDIF, LCD interface, camera interface, PWM, DMA, watchdog timers, temperature sensor, and extensive external memory interfaces (SEMC/FlexSPI). It also provides Secure Boot, AES, SHA, TRNG, tamper detection, and other hardware security features for secure embedded applications. Operates from 1.65–1.95 V core and 3.0–3.6 V I/O supplies, over a −40°C to +105°C junction temperature range, and is housed in a 289-ball MAPBGA (14 × 14 mm) package. The MIMXRT1173CVM8A is currently Not Recommended for New Designs (NRND), with MIMXRT1173CVM8B listed as the recommended replacement. #NXP #MIMXRT1173CVM8A #iMXRT1170 #CortexM7 #CortexM4 #DualCoreMCU #CrossoverMCU #IndustrialAutomation #EdgeAI #MotorControl #EmbeddedSystems

Configurable Analog Front-End (AFE) Potentiostat for Electrochemical Sensors – Ultra-low-power programmable analog front-end designed for electrochemical gas sensors, toxic gas detection, air quality monitoring, industrial safety systems, wearable health devices, environmental monitoring, and embedded sensing applications. The Texas Instruments LMP91000 integrates a complete potentiostat and transimpedance amplifier (TIA), enabling direct interfacing with 2-electrode galvanic and 3-electrode amperometric chemical sensors. Operates from a 2.7 V to 5.25 V supply while consuming less than 10 µA typical supply current, making it ideal for battery-powered systems. Features a programmable TIA gain (2.75 kΩ to 350 kΩ), programmable load resistor, programmable cell bias, I²C-compatible interface, integrated temperature sensor, sensor diagnostics, and support for sensor currents from 5 µA to 750 µA full scale. Housed in a compact 14-pin WSON (4 × 4 mm) package and specified for operation over a −40°C to +85°C temperature range. #TexasInstruments #LMP91000SDXNOPB #LMP91000 #AnalogFrontEnd #Potentiostat #ElectrochemicalSensor #GasSensor #AirQualityMonitoring #IndustrialSafety #I2C #LowPower #EmbeddedSystems