Microcontrollers
A microcontroller is a small, low-cost computer-on-a-chip that can be used to control electronic devices and systems. It consists of a central processing unit (CPU), memory, input/output (I/O) ports, and other peripherals integrated onto a single chip. Microcontrollers are commonly used in a wide range of applications, including automotive systems, home appliances, industrial automation, and consumer electronics. One of the key benefits of microcontrollers is their ability to interact with their environment through sensors and actuators, making them well-suited for use in embedded systems. These systems are often found in devices that require real-time control or data processing, such as medical equipment, aircraft, and factory automation systems. Flux.ai is home to the world's largest community-driven public library of microcontrollers, with footprints, symbols, datasheets, and simulation models for a wide range of devices. Whether you're a professional engineer looking for a specific microcontroller for your next project, or a hobbyist exploring the possibilities of microcontroller-based systems, Flux.ai has the resources you need to get started.
MCH3478-TL-H
N-Channel Power MOSFET – 30 V N-channel enhancement-mode MOSFET optimized for load switching, DC-DC converters, battery-powered devices, power management, motor control, and embedded switching applications. Features a 30 V drain-to-source voltage (VDS), 2 A continuous drain current, and 165 mΩ maximum RDS(on) at VGS = 4.5 V, with 1.8 V logic-level gate drive compatibility for low-voltage microcontroller interfaces. Offers 1.7 nC typical gate charge, 130 pF typical input capacitance, ultra-fast switching performance, and an integrated body diode for efficient power conversion. Rated for ±12 V gate-to-source voltage, 800 mW power dissipation, 150°C maximum junction temperature, and housed in a 3-pin MCPH3 (SC-70 / SOT-323) surface-mount package. This device is obsolete / not recommended for new designs. #onsemi #MCH3478TLH #MCH3478 #NChannelMOSFET #LogicLevelMOSFET #PowerMOSFET #LoadSwitch #DCDCConverter #PowerManagement #MotorDriver #SOT323 #EmbeddedSystems
2 Uses0 StarsCC2662R1FTWRGZRQ1
2.4 GHz Wireless MCU – Automotive-qualified wireless microcontroller for wireless battery-management systems (BMS). The Texas Instruments CC2662R1FTWRGZRQ1 integrates an Arm Cortex-M4F CPU, 352 KB Flash, 88 KB RAM, and a 2.4 GHz wireless transceiver with data rates up to 2 Mbps and up to +5 dBm transmit power. It supports I²C, I²S, SPI, UART, GPIO, and an 8-channel 12-bit ADC, with a 1.8–3.63 V supply range and −40°C to +105°C operating temperature. The device is housed in a 48-pin VQFN, 7 × 7 mm package. #TexasInstruments #CC2662R1 #WirelessMCU #WirelessBMS #2_4GHz #ArmCortexM4F #Bluetooth #IoT #BatteryManagement #AutomotiveElectronics #EmbeddedSystems
0 Uses0 StarsSC0918
CYW43439, RP2040 - 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board Raspberry Pi Pico W / SC0918 Wireless Microcontroller Development Board designed for embedded applications, featuring the Raspberry Pi RP2040 microcontroller with dual-core Arm Cortex-M0+ processor running at up to 133 MHz, 264 kB SRAM, 2 MB onboard flash memory, and integrated 2.4 GHz 802.11n wireless LAN connectivity. The board provides GPIO, SPI, I²C, UART, ADC, PWM, and USB 1.1 interfaces for flexible hardware integration. #RaspberryPi #PicoW #RP2040 #WirelessMCU #EmbeddedSystems #IoT #DevelopmentBoard
11 Uses0 StarsR7KA8T2LFLCAC#UC0
ARM Microcontrollers - MCU RA8T2 Dual core CM85 and CM33, MRAM 1MB / RAM 2MB, w/ EtherCAT BGA289, Microcontroller with a 250 MHz Arm® Cortex®-M85 core for embedded control and real-time applications. Features up to 2 MB Flash, 1 MB SRAM, 10/100 Ethernet MAC, USB 2.0 High-Speed, CAN FD, I²C, SPI, UART, 12-bit ADC, and advanced timer peripherals for motor control and industrial applications. #Microcontroller #ArmCortexM85 #RA8T2 #Renesas #MotorControl #Ethernet #USBHS #CANFD #I2C
1 Uses0 StarsESP8685H4
IC RF TxRx + MCU Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 2.4GHz 28-VFQFN Exposed Pad ESP8685H4 is a 2.4 GHz Wi-Fi 4 and Bluetooth® 5 (LE) wireless microcontroller integrating a 32-bit RISC-V single-core processor with 4 MB embedded flash memory. It operates from a 3.0 V to 3.6 V supply, supports IEEE 802.11 b/g/n and Bluetooth 5 LE, and provides multiple peripherals including SPI, UART, I²C, I²S, PWM, ADC, RMT, TWAI®, and GPIO for embedded wireless applications. #WiFiModule #BluetoothLE #MCU #2_4GHz #RISCV #Embedded
0 Uses0 StarsSTM32G0B1RBT6
ARM® Cortex®-M0+ STM32G0 Microcontroller IC 32-Bit 64MHz 128KB (128K x 8) FLASH 64-LQFP (10x10) STM32G0B1RBT6 is a 32-bit Arm Cortex-M0+ microcontroller from STMicroelectronics, operating up to 64 MHz with 128 KB Flash and 144 KB SRAM. It integrates a 12-bit ADC, 12-bit DACs, timers, comparators, DMA, USB 2.0 Full-Speed, USB Type-C Power Delivery, FDCAN, I²C, SPI, and USART interfaces. Operating from 1.7–3.6 V, it is suitable for industrial control, consumer electronics, IoT, motor control, USB/PD devices, and embedded automation applications. #Microcontroller #MCU #STM32 #CortexM0Plus #Embedded #IoT #USB #CANFD #Industrial #STMicroelectronics
3 Uses0 Stars
