Microcontrollers
A microcontroller is a small, low-cost computer-on-a-chip that can be used to control electronic devices and systems. It consists of a central processing unit (CPU), memory, input/output (I/O) ports, and other peripherals integrated onto a single chip. Microcontrollers are commonly used in a wide range of applications, including automotive systems, home appliances, industrial automation, and consumer electronics. One of the key benefits of microcontrollers is their ability to interact with their environment through sensors and actuators, making them well-suited for use in embedded systems. These systems are often found in devices that require real-time control or data processing, such as medical equipment, aircraft, and factory automation systems. Flux.ai is home to the world's largest community-driven public library of microcontrollers, with footprints, symbols, datasheets, and simulation models for a wide range of devices. Whether you're a professional engineer looking for a specific microcontroller for your next project, or a hobbyist exploring the possibilities of microcontroller-based systems, Flux.ai has the resources you need to get started.
STM32U585CIU6
32-Bit Arm Cortex-M33 Microcontroller – Ultra-low-power MCU with TrustZone security, 160 MHz CPU operation, 2 MB Flash, and 784 KB RAM. The STMicroelectronics STM32U585CIU6 integrates 11-channel 12/14-bit ADCs, 2-channel 12-bit DACs, and interfaces including I²C, SPI, UART/USART, USB/USB OTG, CAN, SAI, LIN, and SmartCard. It operates from 1.71 V to 3.6 V and is housed in a 48-pin UFQFPN (7 × 7 mm) package. #STMicroelectronics #STM32U585CIU6 #STM32U5 #Microcontroller #CortexM33 #MCU #TrustZone #EmbeddedSystems #IoT #ARM
1 Uses0 StarsAutomatic Bike Light
Fully analog automatic bicycle front light with USB-C charging, 1S Li-ion/Li-Po battery input, darkness detection, motion-triggered timer control, and a TPS61165 boost LED driver. The circuit automatically enables the front LEDs when it is dark or motion is detected, without any microcontroller or firmware.
0 Uses0 StarsL9396
Automotive multiple power supply IC designed as a system basis chip for automotive electronics, integrating a switched-mode pre-regulator, three linear regulators, and a configurable 0.8 V to 5 V microcontroller core regulator with up to 1 A buck or 750 mA linear output. It operates from a 4.5 V to 19 V supply with boost (6 V to 19 V without boost), supports a 16-bit SPI interface, includes a 4-channel wheel speed sensor interface, 10-bit ADC, configurable watchdogs, high-side pre-drivers, and is housed in a 64-pin TQFP exposed-pad package. #AutomotiveIC #PowerManagementIC #SystemBasisChip #PMIC #SPI #WheelSpeedSensor #ADC #Watchdog #TQFP64 #STMicroelectronics
1 Uses0 StarsDSPIC33CK256MP508-I/PT
Digital Signal Controllers Digital Signal Processor (DSP) 80-TQFP (12x12) Digital signal controller (DSC) designed for real-time embedded control applications, integrating a 16-bit dsPIC® CPU with 256 KB Flash memory and high-speed DSP capabilities. It operates at up to 100 MIPS, supports 3.0 V to 3.6 V operation, and includes peripherals such as 12-bit ADCs, PWM modules, CAN FD, UART, SPI, I²C, DMA, and USB support (device-dependent). The DSPIC33CK256MP508-I/PT is provided in a 64-pin TQFP package and is suitable for motor control, digital power, and industrial control applications. #Microcontroller #DigitalSignalController #dsPIC33CK #Microchip #MotorControl #EmbeddedSystems
1 Uses0 StarsTLV803EA30DBZR
Ultra-Low-Power Voltage Supervisor (Reset IC) – Single-channel voltage supervisor designed for microcontrollers, processors, IoT devices, industrial control systems, automotive electronics, battery-powered equipment, and embedded systems requiring reliable power-on reset and brownout detection. The Texas Instruments TLV803EA30DBZR monitors a 3.0 V supply rail with a 3.08 V reset threshold, providing an active-low open-drain RESET output to ensure proper system initialization and recovery during undervoltage conditions. Features 250 nA typical quiescent current, 130 ms minimum reset timeout, supply voltage operation from 0.7 V to 6 V, and open-drain output for easy interfacing with multiple voltage domains. Includes power-on reset, brownout protection, and low-power operation, making it ideal for energy-efficient embedded applications. Operates over a −40°C to +125°C temperature range and is housed in a compact 3-pin SOT-23 (DBZ) package for surface-mount designs. #TexasInstruments #TLV803EA30DBZR #TLV803E #VoltageSupervisor #ResetIC #PowerOnReset #BrownoutDetection #LowPower #OpenDrain #PowerManagement #EmbeddedSystems #IndustrialElectronics
21 Uses0 StarsMIMXRT1173CVM8A
Dual-Core Crossover MCU with Arm® Cortex®-M7 and Cortex®-M4 Cores – High-performance crossover microcontroller designed for industrial automation, edge AI, HMI, motor control, robotics, audio processing, IoT gateways, medical devices, and advanced embedded systems. The NXP MIMXRT1173CVM8A integrates an Arm® Cortex®-M7 core running up to 800 MHz and an Arm® Cortex®-M4 core running up to 400 MHz, delivering real-time performance without an external operating system. It features 2 MB on-chip SRAM with support for external program memory, making it suitable for graphics, audio, and complex control applications. The device includes 20-channel 12-bit SAR ADCs, 12-bit DAC, 10/100 Ethernet, USB 2.0 OTG, CAN FD, SD/MMC, I²C, SPI, UART/USART, SAI, SPDIF, LCD interface, camera interface, PWM, DMA, watchdog timers, temperature sensor, and extensive external memory interfaces (SEMC/FlexSPI). It also provides Secure Boot, AES, SHA, TRNG, tamper detection, and other hardware security features for secure embedded applications. Operates from 1.65–1.95 V core and 3.0–3.6 V I/O supplies, over a −40°C to +105°C junction temperature range, and is housed in a 289-ball MAPBGA (14 × 14 mm) package. The MIMXRT1173CVM8A is currently Not Recommended for New Designs (NRND), with MIMXRT1173CVM8B listed as the recommended replacement. #NXP #MIMXRT1173CVM8A #iMXRT1170 #CortexM7 #CortexM4 #DualCoreMCU #CrossoverMCU #IndustrialAutomation #EdgeAI #MotorControl #EmbeddedSystems
0 Uses0 StarsABLS-4.897MHZ-20-R70-D-T
4.897 MHz Surface-Mount Quartz Crystal – AT-cut fundamental-mode quartz crystal designed for microcontrollers, wireless modules, communication equipment, industrial control systems, timing circuits, embedded electronics, and IoT devices. Part of the Abracon ABLS Series, it provides a 4.897 MHz operating frequency with ±50 ppm frequency tolerance, ±50 ppm frequency stability, 20 pF load capacitance, and 70 Ω maximum ESR for reliable clock generation. Features a 100 µW typical drive level (1 mW max), HC-49/US low-profile SMD package, and fundamental resonance mode for stable oscillator performance. Designed for surface-mount assembly, it operates over a −40°C to +85°C temperature range and is suitable for general-purpose embedded and industrial timing applications. #Abracon #ABLS4897MHZ20R70DT #QuartzCrystal #49MHzCrystal #ClockCrystal #TimingDevice #HC49US #SMDCrystal #Microcontroller #IndustrialElectronics #EmbeddedSystems
1 Uses0 Stars
