Interface ICs
An interface IC is a type of integrated circuit that is designed to facilitate communication between two devices or systems. These devices are commonly used in electronic systems to enable the transfer of data and control signals between different components or subsystems. Some common use cases for interface ICs include connecting microcontrollers to peripherals such as sensors or displays, linking multiple processors together in a network, and enabling communication between devices using different communication protocols. Flux.ai has the world's largest community-driven public library of interface ICs, with footprints, symbols, datasheets, and simulation models. This library is a valuable resource for engineers and designers who need access to accurate and up-to-date information on these important components. Whether you are working on a new design project or simply looking to learn more about interface ICs, Flux.ai is an excellent resource to help you find the information you need.
RJHSE5081
Jack Modular Connector 8p8c (RJ45, Ethernet) 90° Angle (Right) Unshielded RJ45 Modular Jack — Provides an 8-position, 8-contact (8P8C) Ethernet interface connector with integrated magnetics for PCB mounting. The RJHSE5081 features a through-hole design, supports 10/100 Base-T Ethernet applications, and includes shielded construction with LED indicators as specified in the manufacturer datasheet. #AmphenolICC #RJHSE5081 #RJ45Connector #EthernetConnector #ModularJack #PCBComponent
0 Uses0 Stars12BH611-GR
9V Battery Snaps & Contacts 9V PC BLK Battery Holder: Provides a PCB-mount connection interface for retaining a single 12 mm coin cell battery. The 12BH611-GR battery holder is designed for 12 mm diameter cells and features a horizontal mounting configuration with through-hole terminals for board assembly. #BatteryHolder #CoinCellHolder #PCBMount #ThroughHoleComponent
4 Uses0 Stars124018792112A
USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Surface Mount, Right Angle; Through Hole Waterproof USB Type-C connector providing a reversible USB Type-C interface for data and power connections in electronic applications. The connector features a waterproof design, USB Type-C receptacle interface, and supports a rated voltage of 5 V DC and current rating of 3 A as specified in the manufacturer datasheet. #USBTypeC #WaterproofConnector #USBConnector #AmphenolICC #PCBConnector #ElectronicComponents
3 Uses0 StarsPCM1820IRTER
ADC, Audio 8k ~ 192k I2S, TDM 20-WQFN (3x3) Analog-to-Digital Converter (ADC) IC that converts analog audio signals into digital data using a 24-bit delta-sigma architecture. The PCM1820IRTER supports stereo audio input, sampling rates up to 192 kHz, and digital audio output interfaces including I²S and TDM. It operates from a 3.3 V analog supply and is available in a 16-pin WQFN package. #AudioADC #DeltaSigmaADC #PCM1820IRTER #TexasInstruments #AudioInterface #ICComponent
0 Uses0 StarsST25DV64KC-IE6T3
RFID Transponder IC 13.56MHz ISO 15693, NFC I2C 1.8V ~ 5.5V 8-TSSOP (0.173", 4.40mm Width) NFC/RFID EEPROM IC that provides contactless memory storage with an I²C interface for data access and configuration. The ST25DV64KC-IE6T3 features 64-Kbit EEPROM memory, operates from a 1.8 V to 5.5 V supply voltage, supports ISO/IEC 15693 and NFC Type 5 communication at 13.56 MHz, and is available in a UFDFPN5 package. #NFC #RFID #EEPROM #I2C #ST25DV64KC #STMicroelectronics #MemoryIC #PCBComponent
2 Uses0 StarsTMP114AIYMTR
Temperature Sensor Digital, Local -40°C ~ 125°C 16 b 4-PICOSTAR (0.76x0.76) Digital Temperature Sensor — measures temperature using a high-accuracy digital sensing element with an I²C-compatible interface. The TMP114AIYMTR operates from a 1.7 V to 5.5 V supply, provides 16-bit temperature resolution, and supports a temperature range of −40°C to +125°C in a small 6-pin SOT-23 package. #TemperatureSensor #DigitalSensor #I2C #PCBComponent #TexasInstruments #TMP114AIYMTR
3 Uses0 StarsHR911130A
CONN MOD JACK RJ45 TH The HR911130A is a single-port RJ45 MagJack® Ethernet connector from HanRun Electronics with integrated Ethernet isolation magnetics and green/yellow status LEDs in a compact through-hole, right-angle package. Per the datasheet, it is designed for 100/1000Base-T Ethernet applications and meets or exceeds IEEE 802.3ab requirements, simplifying PCB layout by eliminating the need for external isolation transformers. Key Features Single-port RJ45 connector with integrated Ethernet magnetics Supports 100/1000Base-T Ethernet applications Integrated green/yellow link/activity LED indicators Shielded metal housing for improved EMI performance Through-hole, right-angle PCB mounting Compliant with IEEE 802.3ab Ethernet requirements 1500 Vrms isolation between UTP side and chip side Integrated 4 x 75 ohm termination network and 1000 pF / 2 kV capacitor shown in datasheet Reduces external component count and PCB space RoHS compliant Shield / mechanical notes: footprint pads 15 and 16 are plated through-hole shield/mechanical tabs; pads 17 and 18 are non-plated locating holes. The current schematic exposes pins 1-14 as electrical terminals; shield tabs 15/16 are documented as physical shield/mechanical tabs and are not exposed as separate schematic terminals. Ideal for routers, switches, embedded Ethernet devices, industrial control, IoT equipment, and other 100/1000Base-T network interfaces. #HR911130A #HanRun #RJ45 #MagJack #Ethernet #LAN #IntegratedMagnetics #NetworkConnector #PCB #EmbeddedSystems #IndustrialElectronics #IoT #ThroughHole #IEEE8023ab #1000BaseT
3 Uses0 StarsASM330LHHXTR
Accelerometer, Gyroscope, Temperature, 6 Axis Sensor I2C, I3C, SPI Output The ASM330LHHX is a 6-axis IMU featuring a 3-axis digital accelerometer and a 3‑axis digital gyroscope with an extended temperature range up to +105°C, designed to address automotive nonsafety applications. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes to serve both the automotive and consumer markets. The ASM330LHHX is AEC-Q100 compliant and industrialized through a dedicated MEMS production flow to meet automotive reliability standards. All the parts are fully tested with respect to temperature to ensure the highest quality level. The sensing elements are manufactured using ST’s proprietary micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit, which is trimmed to better match the characteristics of the sensing element. Features • AEC-Q100 qualified • Android Auto™ compliant and CarPlay® compliant • Extended temperature range from -40 to +105°C • Embedded compensation for high stability over temperature • Accelerometer user-selectable full scale up to ±16 g • Extended gyroscope range from ±125 to ±4000 dps • Dual operating modes: high-performance and low-power mode • I²C, MIPI I3C℠, and SPI serial interfaces • Six-channel synchronized output to enhance accuracy of dead-reckoning algorithms • Programmable finite state machine • Machine learning core • Smart programmable interrupts • Embedded 3 KB FIFO available to underload host processor • ECOPACK and RoHS compliant Applications • Dead reckoning (DR) • Vehicle-to-everything (V2X) • Telematics, e-tolling • Antitheft systems • Impact detection and crash reconstruction • Motion-activated functions • Driving comfort • Vibration monitoring and compensation #ASM330LHHXTR #STMicroelectronics #IMU #MEMS #Accelerometer #Gyroscope #AutomotiveElectronics #MotionSensor #MachineLearning #SensorFusion #AECQ100 #EmbeddedSystems
6 Uses0 Stars
