Battery Management ICs
A Battery Management IC is a specialized microcontroller that monitors and manages the charging and discharging of a lithium-ion or other type of battery. These ICs are essential for ensuring the safe and efficient operation of batteries in a wide range of applications, including portable electronics, electric vehicles, and renewable energy systems. One of the key functions of a Battery Management IC is to optimize the charging and discharging of a battery by controlling the flow of current. This can help to extend the life of the battery and improve its overall performance. In addition to controlling the charging and discharging of a battery, a Battery Management IC can also perform other functions such as monitoring the temperature and voltage of the battery, protecting the battery from overcharge and overdischarge, and providing diagnostic information about the battery's health. Flux.ai has the world's largest community-driven public library of Battery Management ICs, with footprints, symbols, datasheets, and simulation models available for use. Whether you are a designer, engineer, or researcher, the Flux.ai library is an invaluable resource for finding the right Battery Management IC for your project.
CB61F3A-TR1
3A 125V 125V Fuse Board Mount (Cartridge Style Excluded) Surface Mount 2-SMD, Square End Block The CB61F3A-TR1 is a surface-mount fast-acting fuse from Eaton designed for overcurrent protection in compact electronic circuits. It belongs to the CB61F series of SMD “Brick” fuses and is commonly used in power supplies, battery management systems, consumer electronics, servers, and industrial equipment. Key Features Fast-acting fuse for rapid overcurrent protection Current rating: 3 A Voltage rating: 125 VAC / 125 VDC Surface-mount (SMD) package with compact 2410 footprint High interrupt rating: 100 A AC / 300 A DC Low cold resistance: approximately 0.025 Ω Reflow and wave solder compatible Lead-free, halogen-free, and RoHS compliant UL and safety agency approved (cULus, CQC, PSE) Suitable for: Power supplies Battery management systems (BMS) Consumer electronics Medical equipment Industrial electronics #CommonPartsLibrary #Fuse CB61F
35 Uses0 StarsTPS63020DSJT
Buck-Boost Switching Regulator IC Positive Adjustable 1.2V 1 Output 3.5A (Switch) 14-VFDFN Exposed Pad The TPS63020DSJT is a high-efficiency synchronous buck-boost DC-to-DC converter manufactured by Texas Instruments. This integrated power management device is designed to provide a stable regulated output voltage from input power sources that may vary above or below the desired output level. The converter automatically transitions between buck and boost operating modes to maintain efficient and continuous voltage regulation across a wide input range. The device integrates low-resistance power MOSFETs, advanced control circuitry, and high-efficiency switching architecture to minimize power loss and optimize battery utilization in portable electronic systems. It is widely used in battery-powered applications, embedded systems, wireless communication devices, portable instrumentation, industrial electronics, and USB-powered hardware requiring compact and reliable voltage regulation. The TPS63020DSJT is optimized for systems powered by single-cell lithium-ion, lithium-polymer, or multi-cell alkaline battery configurations. Its compact package and integrated functionality reduce external component count and simplify PCB layout while delivering high power conversion efficiency and low quiescent current performance. Engineering Specification Device Type Synchronous buck-boost DC-to-DC converter Power Conversion Topology Automatic buck and boost regulation architecture Input Characteristics Supports input voltages above or below regulated output voltage Output Characteristics Stable regulated DC voltage output Switching Technology Integrated synchronous MOSFET switching architecture Efficiency Characteristics High-efficiency power conversion for battery-powered systems Control Features Automatic operating mode transition and load regulation Power Consumption Low quiescent current operation for portable electronics Thermal Characteristics Integrated thermal management and protection features Protection Features Overcurrent protection Thermal shutdown Undervoltage lockout Short-circuit protection Package Type WSON surface-mount package Mounting Style Surface mount technology Applications Portable electronics Battery-powered systems Embedded hardware Wireless communication devices USB-powered electronics Industrial control systems Portable instrumentation IoT devices Consumer electronics Power management systems Manufacturer Texas Instruments #commonpartslibrary #buckboostconverter #dcdcconverter #powermanagement #texasinstruments #powerelectronics #powersupply #embeddedhardware #portableelectronics #batterypowered #surfaceountcomponents #electronicsdesign #voltageregulator #iothardware #industrialelectronics
142 Uses0 StarsFS8205A
The FS8205A is a dual N-channel enhancement-mode power MOSFET designed primarily for lithium-ion and lithium-polymer battery protection applications. Manufactured by several semiconductor vendors including Fortune Semiconductor, this device integrates two low on-resistance MOSFETs within a compact surface-mount package, enabling efficient bidirectional current control for battery charging and discharging systems. The device is commonly paired with single-cell battery protection controller ICs such as the DW01A to provide overcharge, overdischarge, overcurrent, and short-circuit protection in portable electronic products. Its low drain-to-source resistance minimizes conduction losses and improves overall battery efficiency while maintaining compact PCB layout requirements. The FS8205A is widely used in battery management systems, portable consumer electronics, rechargeable battery packs, USB-powered devices, IoT hardware, and embedded power management circuits requiring reliable load switching and battery protection functionality. Engineering Specification Device Type Dual N-channel power MOSFET Transistor Technology Enhancement-mode MOSFET architecture Channel Configuration Dual independent N-channel MOSFETs Switching Characteristics Low on-resistance for efficient power switching Gate Characteristics Logic-level gate drive compatibility Current Handling Optimized for battery charge and discharge current control Power Efficiency Low conduction loss for improved battery runtime Protection System Compatibility Designed for lithium battery protection controller integration Thermal Characteristics Compact thermal-efficient surface-mount structure Package Type SOP-8 surface-mount package Mounting Style Surface mount technology Reliability Features Stable switching performance and robust load handling capability Applications Lithium-ion battery protection Battery management systems Portable electronics Rechargeable battery packs USB-powered devices Power path switching Embedded systems Consumer electronics IoT hardware Load switching circuits Manufacturer Commonly manufactured by Fortune Semiconductor and compatible vendors #commonpartslibrary #mosfet #dualmosfet #nchannelmosfet #batteryprotection #batterymanagement #powermanagement #powerelectronics #embeddedhardware #consumerelectronics #surfaceountcomponents #electronicsdesign #lithiumbattery #loadswitch #portableelectronics
306 Uses0 StarsINA240A1D
Current Sense Amplifier 1 Circuit 8-SOIC The INA240A1D is a precision current-sense amplifier manufactured by Texas Instruments, specifically designed for high-side and low-side current measurement applications in electrically noisy environments. The device features enhanced PWM rejection capability, enabling accurate current sensing in motor control systems, switching power supplies, solenoid drivers, and other fast-switching power electronics applications. The amplifier is optimized for measuring voltage drops across shunt resistors while maintaining high common-mode voltage tolerance and excellent signal accuracy. Its bidirectional current-sensing capability allows monitoring of charging and discharging currents in battery systems and power management circuits. The INA240A1D provides fixed gain amplification and high common-mode transient immunity, making it suitable for industrial automation, automotive electronics, embedded power systems, and precision current monitoring applications. The device combines low offset voltage, low drift characteristics, and robust analog performance within a compact surface-mount package, simplifying precision current measurement implementation in modern electronic systems. Engineering Specification Device Type Current-sense amplifier Amplifier Configuration Precision bidirectional current-shunt monitor Input Characteristics High common-mode voltage sensing capability Gain Configuration Fixed-gain current measurement amplifier Measurement Topology High-side and low-side current sensing support Signal Performance High accuracy with low offset voltage and low drift PWM Rejection Enhanced PWM rejection for switching power applications Common-Mode Performance High common-mode transient immunity Output Characteristics Analog voltage output proportional to sensed current Power Consumption Low-power precision analog operation Package Type SOIC surface-mount package Mounting Style Surface mount technology Protection and Reliability Designed for robust operation in electrically noisy environments Applications Motor control systems Battery management systems Switching power supplies Industrial automation Current monitoring Solenoid control Power inverters Embedded power electronics Automotive current sensing Load measurement systems Manufacturer Texas Instruments #commonpartslibrary #currentsenseamplifier #analogfrontend #powermanagement #texasinstruments #motorcontrol #currentsensing #embeddedhardware #industrialelectronics #analogdesign #surfaceountcomponents #powerelectronics #signalconditioning #batterymanagement #precisionanalog
288 Uses0 StarsTPS63070RNMT
Buck-Boost Switching Regulator IC Positive Adjustable 2.5V 1 Output 2A 15-PowerVFQFN The TPS63070RNMT is a high-efficiency buck-boost DC-to-DC converter manufactured by Texas Instruments. This power management integrated circuit is designed to provide a stable regulated output voltage from input sources that may be above, below, or equal to the desired output voltage. The device automatically transitions between buck and boost operating modes to maintain efficient and continuous power delivery across varying supply conditions. The converter integrates low-resistance power MOSFETs and advanced control circuitry to achieve high conversion efficiency, low quiescent current, and compact implementation. It is widely used in battery-powered systems, portable electronics, embedded devices, industrial control systems, wireless communication equipment, and USB-powered applications requiring stable voltage regulation from fluctuating power sources. The TPS63070RNMT is optimized for applications demanding high power density, extended battery life, and reliable operation under dynamic load conditions. Its compact package and integrated functionality reduce external component count and simplify PCB design for modern power management architectures. Engineering Specification Device Type Synchronous buck-boost DC-to-DC converter Power Topology Automatic buck and boost mode operation Input Voltage Characteristics Supports input voltages above, below, or equal to output voltage Output Characteristics Regulated fixed or adjustable DC voltage output Switching Technology Integrated synchronous power MOSFET architecture Efficiency Characteristics High-efficiency power conversion across wide operating conditions Control Architecture Advanced PWM/PFM power regulation control Current Capability Designed for medium-to-high current portable power applications Quiescent Current Low standby current for battery-powered operation Thermal Characteristics Integrated thermal protection and efficient heat management Protection Features Overcurrent protection Thermal shutdown Undervoltage lockout Short-circuit protection Package Type VQFN surface-mount package Mounting Style Surface mount technology Applications Battery-powered electronics Portable devices USB-powered systems Industrial automation Embedded systems Wireless communication equipment IoT devices Portable instrumentation Power banks Single-cell battery applications Manufacturer Texas Instruments #commonpartslibrary #powermanagement #buckboostconverter #dcdcconverter #texasinstruments #powerelectronics #powersupply #embeddedhardware #portableelectronics #batterymanagement #surfaceountcomponents #electronicsdesign #voltageregulator #industrialelectronics #usbpower
130 Uses0 StarsHoJLR2512-3W-5mR-1%
HoJLR2512-3W-5mR-1% is a low-resistance current sense resistor designed for high-power current measurement and power monitoring applications in embedded and industrial electronic systems. Constructed using precision metal alloy resistive material, the component provides stable resistance characteristics, low temperature coefficient, and high current handling capability for accurate current sensing under demanding operating conditions. This resistor is optimized for use in power management circuits, battery monitoring systems, motor control applications, DC-DC converters, automotive electronics, and industrial power distribution platforms. Its low resistance value minimizes power loss while enabling precise current measurement when used with amplifiers, ADCs, or dedicated current sensing circuitry. The HoJLR2512-3W-5mR-1% features a compact surface-mount package suitable for automated PCB assembly and high-density layouts. Its robust thermal performance and precision tolerance characteristics make it suitable for high-efficiency power systems requiring reliable current monitoring and overload detection functionality. #commonpartslibrary #currentsenseresistor #shuntresistor #powermanagement #passivecomponents #embeddedhardware #powersupply #industrialelectronics #surfacemountdevice #electronicscomponents
152 Uses0 StarsBQ24074RGTT
Stand-alone single-cell linear battery charger with power path BQ24074RGTT is a highly integrated standalone linear charger and power-path management IC from Texas Instruments designed for single-cell Li-Ion/Li-Polymer battery-powered portable devices. It supports charging directly from USB ports or external adapters while simultaneously powering the system load through integrated Dynamic Power Path Management (DPPM). The device is commonly used in portable electronics, IoT devices, wireless accessories, handheld medical devices, and battery-powered embedded systems. Key Features Single-cell Li-Ion/Li-Polymer battery charger Up to 1.5 A programmable charge current Integrated Dynamic Power Path Management (DPPM) USB-compliant charging support Selectable 100 mA / 500 mA USB current limits Programmable input current limit up to 1.5 A Supports both USB input and wall adapters Input overvoltage protection up to 28 V absolute maximum Integrated thermal regulation and thermal shutdown Reverse-current and short-circuit protection Programmable pre-charge and fast-charge safety timers Battery temperature monitoring via NTC thermistor input Charge status outputs for charging/done indication Current monitoring output (ISET) Compact 16-pin VQFN (3×3 mm) package Wide operating temperature range suitable for industrial applications Typical Applications TWS charging cases and earbuds Portable medical devices IoT and asset tracking systems Handheld gaming accessories Video doorbells and IP cameras Portable embedded systems and development boards Important Design Notes Designed specifically for 1-cell battery applications Requires proper thermal PCB layout due to linear charging architecture DPPM allows the system to operate even with a deeply discharged or missing battery Recommended for compact designs needing integrated charging and system power-path control #CommonPartsLibrary #IntegratedCircuit #PowerManagement
1.2k Uses0 StarsBQ25750RRVR
Charger IC Multi-Chemistry 36-VQFN (5x6) The BQ25750RRVR is a highly integrated switch-mode battery charge controller and power-path management device designed for single-cell to multi-cell lithium-ion and lithium-polymer battery-powered systems. The device supports bidirectional power conversion, enabling both battery charging and system power delivery through USB Type-C and other DC power sources. It integrates high-efficiency buck-boost charging architecture to maintain optimal charging performance across a wide input voltage range. The device is intended for portable electronics, industrial handheld equipment, USB Power Delivery applications, embedded systems, and battery-powered computing platforms requiring advanced power management and flexible charging capability. Integrated power-path management allows simultaneous system operation and battery charging while maintaining battery protection and system stability. The BQ25750RRVR supports programmable charging parameters through an I2C interface, including charge voltage, charge current, input current limit, and system power regulation. The device includes comprehensive protection functions such as overvoltage protection, overcurrent protection, thermal regulation, battery temperature monitoring, and fault reporting. High switching frequency operation enables reduced external component size and compact PCB implementation. Features Integrated synchronous buck-boost battery charger Supports USB Power Delivery and wide DC input sources Bidirectional power conversion capability I2C programmable charging and system parameters Integrated power-path management High-efficiency charging operation Supports multi-cell lithium-ion and lithium-polymer batteries Programmable input current and charge current limits Dynamic power management and system voltage regulation Integrated ADC monitoring for voltage, current, and temperature Battery supplement mode during adapter removal OTG boost mode support Thermal regulation and thermal shutdown protection Input overvoltage and overcurrent protection Battery overvoltage protection Safety timer and watchdog timer support NTC thermistor interface for battery temperature monitoring Interrupt and fault status reporting Compact WQFN package suitable for space-constrained designs Electrical Characteristics Wide input operating voltage range Programmable battery charge voltage High charge current capability Integrated low RDS(on) MOSFET drivers High switching frequency operation High conversion efficiency across operating range Low standby and shutdown current consumption Accurate input and charge current regulation Integrated analog-to-digital converter telemetry Interface and Control I2C serial communication interface Programmable charging profiles Configurable protection thresholds Status and interrupt reporting ADC telemetry reporting Enable and control pins for system integration Protection Features Input overvoltage protection Input overcurrent protection Battery overvoltage protection Thermal shutdown protection Thermal regulation control Short-circuit protection Watchdog timer protection Safety charging timer Battery temperature qualification support Package Information Package Type: WQFN Package Suffix: RRV Compact thermally enhanced package Surface-mount device Suitable for automated PCB assembly processes Applications USB Type-C charging systems Portable computers and tablets Industrial handheld devices Power banks and battery packs Embedded battery-powered systems Portable instrumentation Consumer electronics Smart battery charging platforms #commonpartslibrary #integratedcircuit #powermanagement #batterycharger
22 Uses0 StarsBQ25622RYKR
Charger IC Lithium Ion/Polymer 18-WQFN-HR (3x2.5) The BQ25622RYKR is a highly integrated standalone switch-mode battery charge management and system power-path management device designed for single-cell lithium-ion and lithium-polymer batteries. The device integrates a high-efficiency synchronous buck charger, system power-path control, input current management, and battery protection functions into a compact solution optimized for portable and embedded applications. The device supports USB and external adapter power sources while providing programmable charging parameters through an I²C interface. Integrated power MOSFETs and advanced power management features reduce external component count and improve overall system efficiency. The charger incorporates dynamic power management, thermal regulation, battery temperature monitoring, and multiple safety protections to ensure reliable operation under varying load and environmental conditions. The BQ25622 family is designed for compact battery-powered systems requiring efficient charging, intelligent power-path control, and low system power consumption. Engineering Specification Manufacturer: Texas Instruments Device Type: Single-Cell Li-Ion/Li-Polymer Switching Battery Charger with Integrated Power-Path Management Battery Chemistry Support: Lithium-Ion and Lithium-Polymer Charging Topology: Synchronous Buck Switching Charger Input Power Sources: USB Input and External DC Adapter Support Charge Current Capability: Programmable Fast Charge Current Support Communication Interface: I²C Serial Communication Interface Integrated Power Devices: Internal High-Side and Low-Side MOSFETs Charging Features: Precharge Mode Fast Charge Mode Charge Termination Automatic Recharge Programmable Charge Parameters Safety Timer Control Power Management Features: Dynamic Power-Path Management Input Current Optimization Narrow Voltage DC Regulation Input Voltage Regulation System Voltage Regulation Monitoring and Reporting Features: Charge Status Monitoring Fault Status Reporting Battery Temperature Monitoring through NTC Interface Input Source Detection Protection Features: Input Overvoltage Protection Battery Overvoltage Protection Thermal Shutdown Protection Thermal Regulation Input Current Limiting Short-Circuit Protection Safety Timer Protection Package Type: WQFN Package Package Variant: RYK Mounting Type: Surface Mount Typical Applications: Portable Consumer Electronics Embedded Battery-Powered Devices IoT Systems Handheld Industrial Equipment USB-Powered Systems Wearable Electronics Portable Medical Devices #commonpartslibrary #integratedcircuit #powermanagement #batterycharger
7 Uses0 StarsBQ25620RYKR
Charger IC Lithium Ion/Polymer 18-WQFN-HR (3x2.5) The BQ25620RYKR is a highly integrated standalone switch-mode battery charge management and system power-path management device designed for single-cell lithium-ion and lithium-polymer batteries. The device integrates a synchronous buck charger, power-path management, input current optimization, and system regulation functions into a compact package suitable for portable and battery-powered embedded systems. It supports USB and adapter power sources with high-efficiency charging operation and dynamic power management for optimized thermal and power performance. The device includes integrated MOSFETs, charge termination, safety timers, input overvoltage protection, thermal regulation, and battery temperature monitoring. It supports I²C communication for programmable charging parameters, system monitoring, and fault reporting. The integrated narrow-voltage DC architecture improves efficiency while reducing external component count and PCB area. Engineering Specification Manufacturer: Texas Instruments Device Type: Single-Cell Li-Ion/Li-Polymer Switching Battery Charger with Power-Path Management Battery Chemistry Support: Lithium-Ion and Lithium-Polymer Charging Topology: Synchronous Buck Converter Input Supply Support: USB Power and External Adapter Sources Input Voltage Operating Range: Wide Input Voltage Support with Input Overvoltage Protection Charge Current Capability: High Current Fast Charging Support System Power Path: Integrated Dynamic Power-Path Management Communication Interface: I²C Serial Interface Integrated MOSFETs: High-Side and Low-Side Power MOSFETs Included Charging Functions: Preconditioning Charge Fast Charge Charge Termination Recharge Function Safety Timer Control Protection Features: Input Overvoltage Protection Battery Overvoltage Protection Thermal Shutdown Thermal Regulation Charge Safety Timer Input Current Limiting Short-Circuit Protection Battery Monitoring Features: Battery Temperature Monitoring via NTC Charge Status Reporting Fault Status Reporting System Voltage Regulation Power Management Features: Narrow Voltage DC Regulation Dynamic Input Power Management Input Current Optimization Automatic Power Source Detection Package Type: WQFN Package Package Variant: RYK Mounting Type: Surface Mount Application Areas: Portable Electronics Embedded Battery-Powered Systems Handheld Devices USB-Powered Equipment Industrial Portable Devices IoT Systems Consumer Electronics #commonpartslibrary #integratedcircuit #powermanagement #batterycharger
5 Uses0 Stars
