Digital Signal Controllers Digital Signal Processor (DSP) 80-TQFP (12x12) Digital signal controller (DSC) designed for real-time embedded control applications, integrating a 16-bit dsPIC® CPU with 256 KB Flash memory and high-speed DSP capabilities. It operates at up to 100 MIPS, supports 3.0 V to 3.6 V operation, and includes peripherals such as 12-bit ADCs, PWM modules, CAN FD, UART, SPI, I²C, DMA, and USB support (device-dependent). The DSPIC33CK256MP508-I/PT is provided in a 64-pin TQFP package and is suitable for motor control, digital power, and industrial control applications. #Microcontroller #DigitalSignalController #dsPIC33CK #Microchip #MotorControl #EmbeddedSystems

8-Bit Microcontroller – Microchip PIC18F4620-I/PT is an 8-bit PIC microcontroller with 64 KB Flash program memory, 3.8 KB RAM, and 1 KB EEPROM, operating at up to 40 MHz. It includes 36 I/O pins, a 10-bit ADC with 13 channels, I²C, SPI, and EUSART interfaces, plus timers, PWM, watchdog, brown-out reset, and analog comparators. The device operates from 4.2 V to 5.5 V for this specific I/PT variant and is housed in a 44-pin TQFP (10 × 10 mm) package. #Microchip #PIC18F4620 #Microcontroller #PIC18 #8BitMCU #FlashMCU #ADC #I2C #SPI #UART #EmbeddedSystems #TQFP

Low-Dropout (LDO) Voltage Regulator – Fixed 5.0 V positive-output LDO regulator providing up to 250 mA output current for low-power voltage regulation. Operates from a 2.7 V to 13.2 V input voltage, features 2 µA typical quiescent current, 625 mV typical dropout voltage at 250 mA, ±2% output voltage accuracy, and 44 dB typical PSRR at 100 Hz. Includes overcurrent protection, short-circuit protection, and overtemperature shutdown. Specified for operation over a −40°C to +125°C temperature range and housed in a 3-pin SOT-89 package. #Microchip #MCP1702T5002EMB #MCP1702 #LDO #VoltageRegulator #LowDropout #5V #250mA #LowPower #PowerManagement #SOT89 #EmbeddedSystems

Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 8-SOIC Dual General-Purpose Operational Amplifier featuring rail-to-rail input/output, a 1 MHz gain-bandwidth product, 0.6 V/µs slew rate, and low 100 µA typical quiescent current per amplifier. The MCP6002-I/SN operates from 1.8 V to 6.0 V and is suitable for analog signal conditioning, active filters, sensor interfaces, photodiode amplifiers, and battery-powered applications; it is housed in an 8-lead SOIC package and rated for -40°C to +85°C. #OperationalAmplifier #OpAmp #DualOpAmp #RailToRail #LowPower #Analog #SignalConditioning #SensorInterface #Microchip

AVR tinyAVR 2 Microcontroller IC 8-Bit 20MHz 16KB (16K x 8) FLASH IC 14-SOIC Microchip #microcontroller #commonpartslibrary

USB Hub Controller USB 2.0 USB Interface 24-QFN (4x4) USB 2.0 Hi-Speed hub controller that provides two downstream USB ports with a USB 2.0 upstream interface. It supports high-speed 480 Mbps, full-speed 12 Mbps, and low-speed 1.5 Mbps USB operation, operates from a 3.3 V supply, and is housed in a 28-pin QFN package. #USB #USB2 #USBHub #Microchip #USB2422

EEPROM Memory IC 2Kbit I2C 400 kHz 900 ns SOT-23-5 EEPROM memory providing 2 Kbit (256 × 8) nonvolatile data storage over an I²C-compatible serial interface. It operates from a 2.5 V to 5.5 V supply, supports up to 400 kHz clock frequency, and features a 16-byte page write buffer, self-timed erase/write cycles, and more than 1 million erase/write cycles with data retention exceeding 200 years. #EEPROM #SerialEEPROM #I2C #NonVolatileMemory #2Kbit #256x8 #Microchip #EmbeddedSystems #PCBLibrary #SOT23

1/1 Transceiver CANbus 8-DFN (3x3) High-speed CAN FD transceiver for interfacing a CAN protocol controller with a physical CAN bus, supporting CAN FD data rates up to 8 Mbps. Operates from a 4.5 V to 5.5 V supply, features VIO pin for 1.8 V, 2.5 V, 3.3 V, or 5.0 V controller interfaces, supports ISO 11898-2:2016 compliant high-speed CAN, and includes TXD dominant timeout, thermal shutdown, and bus fault protection. #HighSpeedCANFDTransceiver #CANFD #CANBus #8Mbps #ISO118982 #5V #VIOInterface #Automotive #Microchip

Linear Voltage Regulator IC Positive Fixed 1 Output 250mA SOT-23-3 Low-Dropout (LDO) Voltage Regulator providing a fixed 3.0 V output at up to 250 mA, with 2.3–6.0 V input range, typically 1.6 µA quiescent current, and up to 350 mV dropout voltage at full load. The MCP1700T-3002E/TT is suitable for battery-powered devices, microcontrollers, sensors, and other low-power applications, and is housed in a 3-pin SOT-23 package. #LDO #VoltageRegulator #LinearRegulator #3VRegulator #Microchip #SOT23 #LowPower #PowerManagement

PIC PIC® XLP™ 16F Microcontroller IC 8-Bit 32MHz 28KB (16K x 14) FLASH 28-UQFN (4x4) 8-bit PIC microcontroller for embedded control applications, operating from a 1.8 V to 3.6 V supply with a maximum CPU frequency of 32 MHz. It integrates 28 KB Flash, 2 KB RAM, 256 bytes EEPROM, a 12-bit ADC with up to 20 channels, 5-bit DAC, SPI, I²C, and EUSART interfaces, 24 GPIOs, LCD controller support, multiple timers, PWM, comparators, and Core Independent Peripherals in a 28-pin UQFN package. #Microcontroller #8BitMCU #PIC16LF19156 #Microchip #EmbeddedSystems #FlashMCU #LowPower #12BitADC #SPI #I2C #EUSART #PWM #LCDController #UQFN28 #PCBLibrary

This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #attiny2313 #TPS613222A #ISP #buzzer #reusable #module #simple-embedded #microchip #arduino #sublayout